summaryrefslogtreecommitdiff
path: root/doc
Commit message (Collapse)AuthorAgeLines
* at91: Introduction of at91sam9g10 SOC.Sedji Gaouaou2009-07-12-1/+1
| | | | | | | AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
* at91: Introduction of at91sam9g45 SOC.Sedji Gaouaou2009-07-12-0/+20
| | | | | | | | | | | | AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
* Coding style cleanup; update CHANGELOGWolfgang Denk2009-07-07-7/+6
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* arm nomadik: allow Nand and OneNand to coexistsAlessandro Rubini2009-07-06-0/+10
| | | | | | | | | The evaluation kit has both Nand and OneNand, both drivers are there and the two configurations only select a different default for the jffs partition. This adds the OneNand driver and cleans up storage. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
* arm nomadik: rename board to nhk8815Alessandro Rubini2009-07-06-0/+0
| | | | | | | | This is an error in my side in the initial submission: nobody calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
* at91sam9263ek: add nor flash supportJean-Christophe PLAGNIOL-VILLARD2009-06-21-0/+5
| | | | | | this will allow you to store use it for the env and to boot directly U-Boot from Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'next' of ../masterWolfgang Denk2009-06-14-66/+151
|\
| * 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]xPeter Tyser2009-06-12-5/+5
| | | | | | | | | | | | | | | | Use the standard lowercase "x" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xxPeter Tyser2009-06-12-5/+5
| | | | | | | | | | | | | | | | Use the standard lowercase "xx" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * Fix a typo in the instructions on using omap3's gpio interface.Tom Rix2009-06-12-1/+1
| | | | | | | | | | | | | | | | Using the example for reading a gpio, shows the problem. NULL should be the gpio number. Signed-off-by: Tom Rix <Tom.Rix@windriver.com> Acked-by: Dirk Behme <dirk.behme@googlemail.com>
| * OMAP3 Port kernel omap gpio interface.Tom Rix2009-06-12-0/+32
| | | | | | | | | | | | | | | | | | Port version 2.6.27 of the linux kernel's omap gpio interface to u-boot. The orignal source is in linux/arch/arm/plat-omap/gpio.c See doc/README.omap3 for instructions on use. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * ZOOM2 Add initial support for Zoom2Tom Rix2009-06-12-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zoom2 is a new board from Texas Instruments and LogicPD The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken. http://www.logicpd.com This is a pdf of the product http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf This is the product description web page http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes. To configure, run make omap3_zoom2_config Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * LED Add documentation describing the status_led and colour led API.Tom Rix2009-06-12-0/+78
| | | | | | | | | | | | | | | | This document describes the u-boot status LED API. This allows common u-boot commands to use a board's leds to provide status for activities like booting and downloading files. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * i2c: Update references to individual i2c commandsPeter Tyser2009-06-12-43/+19
| | | | | | | | | | | | | | | | The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop, and isdram are no longer available so all references to them have been updated to the new form of "i2c <cmd>". Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
| * i2c: Remove deprecated individual i2c commandsPeter Tyser2009-06-12-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The following individual I2C commands have been removed: imd, imm, inm, imw, icrc32, iprobe, iloop, isdram. The functionality of the individual commands is still available via the 'i2c' command. This change only has an impact on those boards which did not have CONFIG_I2C_CMD_TREE defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | Prepare v2009.06v2009.06Wolfgang Denk2009-06-14-1/+0
|/ | | | | | Update CHANGELOG, fix minor coding stylke issue. Update Makefile. Signed-off-by: Wolfgang Denk <wd@denx.de>
* 85xx: Add README for MPC8569MDSHaiying Wang2009-06-12-0/+78
| | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Schedule removal of non-CONFIG_NET_MULTI net driver APIBen Warren2009-05-15-0/+19
| | | | | | | This will make CONFIG_NET_MULTI the only net driver configuration and we'll be able to remove this option. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Update CHANGELOG, coding style cleanup.Wolfgang Denk2009-04-05-8/+8
|
* at91sam9: add watchdog supportJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+11
| | | | | Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* tools/Makefile: Compile ncb when CONFIG_NETCONSOLEPeter Tyser2009-04-04-4/+2
| | | | | | Also conditionally add ncb.o to OBJ_FILES list Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* mflash: Initial mflash supportunsik Kim2009-04-03-0/+94
| | | | | | | | | | | | | | | | | | | | Mflash is fusion memory device mainly targeted consumer eletronic and mobile phone. Internally, it have nand flash and other hardware logics and supports some different operation (ATA, IO, XIP) modes. IO mode is custom mode for the host that doesn't have IDE interface. (Many mobile targeted SoC doesn't have IDE bus) This driver support mflash IO mode. Followings are brief descriptions about IO mode. 1. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) 2. IO mode uses SRAM bus interface. Signed-off-by: unsik Kim <donari75@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-04-03-96/+13
|\
| * Noisily disable the legacy NAND subsystem.Scott Wood2009-04-03-96/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Legacy NAND is marked for feature removal after April 2009 (i.e. this upcoming release). There are still several boards that reference it (though many do so only for disk-on-chip support which has been silently disabled for a while now). These boards will now fail to build with #error, though the code is still there if the user removes #error. The plan is to remove the code outright in the next release, along with any board code that refers to it (such as board/esd/common/auto_update.c). Also, remove the legacy NAND API description from README.nand. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Add "source" command; prepare removal of "autoscr" commandWolfgang Denk2009-04-03-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now. This patch prepares this change and starts a 6 month transition period as follows: - The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before - The old "autoscr" command name is kept as an alias for compatibility - Command sequences, script files atc. have been adapted to use the new "source" command - Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Add "GPL cleanup" task to feature-removal-schedule.txtWolfgang Denk2009-04-03-0/+14
|/ | | | | | | Announce removal of all non-GPL or GPL-incompatible files after August 2009. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk2009-03-26-1/+1
|\
| * at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.Nicolas Ferre2009-03-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board. It is essentially the same, with a few minor differences. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'mimc200'Haavard Skinnemoen2009-03-23-16/+216
|\ \ | |/ |/|
| * Merge branch 'cleanups' into nextHaavard Skinnemoen2009-02-23-16/+216
| |\
| | * Merge branch 'fixes' into cleanupsHaavard Skinnemoen2008-12-17-763/+1355
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/atmel/atngw100/atngw100.c board/atmel/atstk1000/atstk1000.c cpu/at32ap/at32ap700x/gpio.c include/asm-avr32/arch-at32ap700x/clk.h include/configs/atngw100.h include/configs/atstk1002.h include/configs/atstk1003.h include/configs/atstk1004.h include/configs/atstk1006.h include/configs/favr-32-ezkit.h include/configs/hammerhead.h include/configs/mimc200.h
| | * | avr32: refactor the portmux/gpio codeHaavard Skinnemoen2008-09-01-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Separate the portmux configuration functionality from the GPIO pin control API. - Separate the controller-specific code from the chip-specific code. - Allow "ganged" port configuration (multiple pins at once). - Add more flexibility to the "canned" peripheral select functions: - Allow using more than 23 address bits, more chip selects, as well as NAND- and CF-specific pins. - Make the MACB SPEED pin optional, and choose between MII/RMII using a parameter instead of an #ifdef. - Make it possible to use other MMC slots than slot 0, and support different MMC/SDCard data bus widths. - Use more reasonable pull-up defaults; floating pins may consume a lot of power. - Get rid of some custom portmux code from the mimc200 board code. The old gpio/portmux API couldn't really handle its requirements, but the new one can. - Add documentation. The end result is slightly smaller code for all boards. Which isn't really the point, but at least it isn't any larger. This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if the board maintainers could help me test this on their boards. In particular, the mimc200 port has lost a lot of code, so I'm hoping Mark can help me out. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Mark Jackson <mpfj@mimc.co.uk> Cc: Alex Raimondi <alex.raimondi@miromico.ch> Cc: Julien May <julien.may@miromico.ch> Changes since v1: * Enable pullup on NWAIT * Add missing include to portmux-pio.h * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
| | * | avr32: Update READMEHaavard Skinnemoen2008-09-01-16/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove some outdated and/or unnecessary information, and add updated information about the toolchain and buildroot. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | | | doc/README.enetaddr: document proper MAC usageMike Frysinger2009-03-20-0/+99
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Ben Warren <biggerbadderben@gmail.com>
* | | | sh: Add support 32-Bit Extended Address Mode to sh7785lcrYoshihiro Shimoda2009-03-12-0/+41
|/ / / | | | | | | | | | | | | | | | | | | | | | We can built 'make sh7785lcr_32bit_config'. And add new command "pmb" for this mode. This command changes PMB for using 512MB system memory. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Coding style cleanup; update CHANGELOGWolfgang Denk2009-02-12-45/+44
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Add feature-removal-schedule.txtPeter Tyser2009-02-11-0/+37
| | | | | | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-02-01-0/+138
|\ \ \
| * | | OMAP3: Add Zoom1 board supportDirk Behme2009-01-28-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here: http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * | | OMAP3: Add Pandora supportDirk Behme2009-01-28-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Pandora support. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * | | OMAP3: Add EVM boardDirk Behme2009-01-28-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add EVM board support. Signed-off-by: Manikandan Pillai <mani.pillai@ti.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * | | OMAP3: Add Overo boardDirk Behme2009-01-28-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Overo board support. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * | | OMAP3: Add common power code, README, and BeagleBoardDirk Behme2009-01-28-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add BeagleBoard support, common power code and README. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * | | Initial support for Nomadik 8815 development boardAlessandro Rubini2009-01-24-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NMDK8815 board is distributed by ST Microelectornics. Other (proprietary) code must be run to unlock the CPU before U-Boot runs. doc/README.nmdk8815 outlines the boot sequence. This is the initial port, with basic infrastructure and a working serial port. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | | ppc4xx: Add variable "korat_usbcf" for Korat boardLarry Johnson2009-01-29-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new environment variable "korat_usbcf" selects the USB port used by the Korat board's CompactFlash controller. Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Update CHANGELOG, tiny coding style cleanup.Wolfgang Denk2009-01-28-1/+0
|/ / / | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-01-24-0/+167
|\ \ \
| * | | Add README file for MPC8572DS boardHaiying Wang2009-01-23-0/+167
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-01-24-0/+80
|\ \ \ \
| * \ \ \ Merge branch 'next'Kim Phillips2009-01-23-0/+171
| |\ \ \ \ | | |/ / / | |/| | |
generated by cgit v1.1 at 2024-11-16 20:32:54 +0000