summaryrefslogtreecommitdiff
path: root/doc
Commit message (Collapse)AuthorAgeLines
* am335x: update README for BCH16pekon gupta2014-06-06-0/+42
| | | | | | updates documentation with explanation on how to select ECC schemes. Signed-off-by: Pekon Gupta <pekon@ti.com>
* mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device ↵pekon gupta2014-06-06-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | bus-width GPMC controller needs to be configured based on bus-width of the NAND device connected to it. Also, dynamic detection of NAND bus-width from on-chip ONFI parameters is not possible in following situations: SPL: SPL NAND drivers does not support ONFI parameter reading. U-boot: GPMC controller iniitalization is done in omap_gpmc.c:board_nand_init() which is called before probing for devices, hence any ONFI parameter information is not available during GPMC initialization. Thus, OMAP NAND driver expected board developers to explicitely write GPMC configurations specific to NAND device attached on board in board files itself. But this was troublesome for board manufacturers as they need to dive into lengthy platform & SoC documents to find details of GPMC registers and appropriate configurations to get NAND device working. This patch instead adds existing CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config hich indicates that connected NAND device has x16 bus-width. And then based on this config GPMC driver itself initializes itself based on NAND bus-width. This keeps board developers free from knowing GPMC controller specific internals. Signed-off-by: Pekon Gupta <pekon@ti.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-06-02-4/+143
|\
| * power: Add support for TPS65090 PMU chip.Tom Wai-Hong Tam2014-05-28-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds driver support for the TPS65090 PMU. Support includes hooking into the pmic infrastructure so that the pmic commands can be used on the console. The TPS65090 supports the following functionality: - fet enable/disable/querying - getting and setting of charge state Even though it is connected to the pmic infrastructure it does not hook into the pmic charging charging infrastructure. The device tree binding is from Linux, but only a small subset of functionality is supported. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Signed-off-by: Rong Chang <rongchang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMCJaehoon Chung2014-05-16-4/+4
| | | | | | | | | | | | | | | | Exynos serise can be supported the dw-mmc controller. So, it's good that used the general prefix as "_EXYNOS_DWMMC". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm:at91: enable ROM loadable atmel imageAndreas Bießmann2014-05-27-0/+21
| | | | | | | | | | | | | | | | For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Bo Shen <voice.shen@atmel.com>
* | doc:git-mailrc: Add entry for dfu subsystemŁukasz Majewski2014-05-23-0/+2
| | | | | | | | | | | | Entry for dfu subsystem have been added to doc/git-mailrc file Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-05-22-0/+261
|\ \
| * | usb/gadget: add the fastboot gadgetSebastian Siewior2014-05-08-0/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains an implementation of the fastboot protocol on the device side and documentation. This is based on USB download gadget infrastructure. The fastboot function implements the getvar, reboot, download and reboot commands. What is missing is the flash handling i.e. writting the image to media. v3 (Rob Herring): This is based on http://patchwork.ozlabs.org/patch/126798/ with the following changes: - Rebase to current mainline and updates for current gadget API - Use SPDX identifiers for licenses - Traced the history and added missing copyright to cmd_fastboot.c - Use load_addr/load_size for transfer buffer - Allow vendor strings to be optional - Set vendor/product ID from config defines - Allow Ctrl-C to exit fastboot mode v4: - Major re-write to use the USB download gadget. Consolidated function code to a single file. - Moved globals into single struct. - Use puts and putc as appropriate. - Added CONFIG_USB_FASTBOOT_BUF_ADDR and CONFIG_USB_FASTBOOT_BUF_SIZE to set the fastboot transfer buffer. v5: - Add CONFIG option documentation to README - Rebase using new downloader registration Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
* | | Revert "sandbox: move source files from board/ to arch/sandbox/"Masahiro Yamada2014-05-16-299/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 258060905e04fe2eb509756ef3b37e23e220a2d6. Conflicts: boards.cfg Wrong patch 25806090 was applied by accident. Revert it. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | | disk: part_efi: add support for the Backup GPTSteve Rae2014-05-12-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | Check the Backup GPT table if the Primary GPT table is invalid. Renamed "Secondary GPT" to "Backup GPT" as per: UEFI Specification (Version 2.3.1, Errata A) Signed-off-by: Steve Rae <srae@broadcom.com>
* | | doc: README.generic-board: Fix typoFabio Estevam2014-05-12-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'tom' of git://git.denx.de/u-boot-x86Tom Rini2014-05-09-0/+299
|\ \ \ | |_|/ |/| |
| * | sandbox: move source files from board/ to arch/sandbox/Masahiro Yamada2014-05-09-0/+299
| |/ | | | | | | | | | | | | | | | | | | | | | | Prior to commit 33a02da0, all boards must have board/${BOARD}/ or board/${VENDOR}/${BOARD}/ directory. Now this rule is obsolete. It looks weird that sandbox defines "vendor" and "board" just for meeting the old U-Boot directory structure. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org>
* | Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-37/+499
|\ \ | |/ | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-04-25-0/+89
| |\
| | * powerpc/T4QDS: add two stage boot of nand/sdShaohui Xie2014-04-22-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND/SD boot loader using SPL framework. PBL initialise the internal SRAM and copy SPL, this further initialise DDR using SPD and environment and copy u-boot from NAND/SD to DDR, finally SPL transfer control to u-boot. NOR uses CS1 instead of CS2 when NAND boot, fix it. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/b4qds:Add support of 2 stage NAND boot-loaderPrabhakar Kushwaha2014-04-22-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND boot loader using SPL framework. here, PBL initialise the internal SRAM and copy SPL(160KB). This further initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND to DDR. Finally SPL transer control to u-boot. Initialise/create followings required for SPL framework - Add spl.c which defines board_init_f, board_init_r - update tlb and ddr accordingly Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | MIPS: drop incaip boardDaniel Schwierzeck2014-04-20-0/+1
| |/ | | | | | | | | | | | | | | | | This is dead hardware and no one is interested in making the necessary changes for upcoming features like generic board or driver model. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wolfgang Denk <wd@denx.de>
| * kbuild: docbook: sync with Linux Kernel v3.15-rc1Masahiro Yamada2014-04-18-19/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit imports DocBook-related updates from v3.14 to v3.15-rc1. - commit ec3fadd64b9940baa2a369bf978e8561837db3f5 kbuild: docbook: use $(obj) and $(src) rather than specific path - commit 100da4c0150c97ce34d4d3b38bf2f5449b05ae4f kbuild: docbook: specify KERNELDOC dependency correctly - commit 6f89b9c1d6b29eaa600ac4a8ac1314b0d06f15e3 kbuild: docbook: include cmd files more simply - commit ac6d662a95a6989d83b259ccf8ec01dd7903af73 doc: Add "*.svg" to DocBook/.gitignore - commit 832919bfcf0cfd75767c68b0c61f7cf48be860a8 DocBook: Make mandocs parallel-safe - commit c4d79a4799719f2b0cd354ee498aad605730c97e work around xmlto bug in htmldocs Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * doc:power:pmic: Add doc entry for PMIC(v2) frameworkŁukasz Majewski2014-04-18-0/+166
| | | | | | | | | | | | | | | | | | | | | | Well written documentation for PMIC framework was missing and hence it has been probably difficult and time consuming for other developers to understand rationale for key design decisions and overall design structure. This commit provides proper documentation entry. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: remove lubbock board supportMasahiro Yamada2014-04-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/lubbock/* - Remove include/configs/lubbock.h - Cleanup defined(CONFIG_LUBBOCK) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove MOUSSE board supportMasahiro Yamada2014-04-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/mousse/* - Remove include/configs/MOUSSE.h - Clean-up defined(CONFIG_MOUSSE) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove rsdproto board supportMasahiro Yamada2014-04-18-0/+1
| | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/rsdproto/* - Remove include/configs/rsdproto.h - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove RPXsuper board supportMasahiro Yamada2014-04-18-0/+1
| | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/rpxsuper/* - Remove include/configs/RPXsuper.h - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove RPXClassic, RPXlite boards supportMasahiro Yamada2014-04-18-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/RPXlite/* - Remove board/RPXClassic/* - Remove include/configs/RPXlite.h - Remove include/configs/RPXClassic.h - Clean-up defined(CONFIG_RPXCLASSIC) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove genietv board supportMasahiro Yamada2014-04-18-3/+1
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/genietv/* - Remove include/configs/GENIETV.h - Clean-up if defined(CONFIG_GENIETV) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove MBX and MBX860T boards supportMasahiro Yamada2014-04-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/mbx8xx/* - Remove include/configs/{MBX.h,MBX860T.h} - Clean-up if defined(CONFIG_MBX) - Move the entries from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: remove NX823 board supportMasahiro Yamada2014-04-18-2/+3
| | | | | | | | | | | | | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/nx823/* - Remove include/configs/NX823.h - Clean-up ifdef(CONFIG_NX823) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * powerpc: mpc8xx: delete an unused source fileMasahiro Yamada2014-04-17-1/+1
| | | | | | | | | | | | | | | | | | References to the wireless keyboard should also be removed from README.console. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
| * board: esd: remove remainders of dead boardsMasahiro Yamada2014-04-17-0/+2
| | | | | | | | | | | | | | | | | | | | | | Commit 99bcad18 deleted ADCIOP and DASA_SIM board support but missed to delete board/esd/adciop and board/esd/dasa_sim. It also missed to add entries to doc/README.scrapyard. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
| * cosmetic: README.scrapyard: fix false removed date and commitMasahiro Yamada2014-04-17-4/+4
| | | | | | | | | | | | | | | | | | Describe removed date in the form of YYYY-MM-DD, not YYYY-DD-MM. And wrong commit hash also should be fixed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * cosmetic: README.scrapyard: sort in reverse chronological orderMasahiro Yamada2014-04-17-7/+7
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * Merge branch 'next'Tom Rini2014-04-17-1/+19
| |\
| | * tools, fit_check_sign: verify a signed fit imageHeiko Schocher2014-03-21-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | add host tool "fit_check_sign" which verifies, if a fit image is signed correct. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org>
| | * rsa: add sha256-rsa2048 algorithmHeiko Schocher2014-03-21-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | based on patch from andreas@oetken.name: http://patchwork.ozlabs.org/patch/294318/ commit message: I currently need support for rsa-sha256 signatures in u-boot and found out that the code for signatures is not very generic. Thus adding of different hash-algorithms for rsa-signatures is not easy to do without copy-pasting the rsa-code. I attached a patch for how I think it could be better and included support for rsa-sha256. This is a fast first shot. aditionally work: - removed checkpatch warnings - removed compiler warnings - rebased against current head Signed-off-by: Heiko Schocher <hs@denx.de> Cc: andreas@oetken.name Cc: Simon Glass <sjg@chromium.org>
| * | Start the deprecation process for generic boardSimon Glass2014-04-17-0/+189
| | | | | | | | | | | | | | | | | | | | | | | | We should move forward to remove the old board init code. Add a prominent message to encourage maintainers to get started on this work. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to bootTom Rini2014-04-17-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | We add two new environment variables, falcon_args_file and falcon_image_file, which when set will override the compiled in default values for falcon mode. Signed-off-by: Tom Rini <trini@ti.com>
* | | README.falcon: Document environment variables for falcon modeTom Rini2014-04-17-0/+9
|/ / | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-08-5/+17
|\ \ | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * | Revert "Start the deprecation process for generic board"Tom Rini2014-04-04-189/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | We've run into a non-trivial conversion to CONFIG_SYS_GENERIC_BOARD so we'll postpone this notice until right after v2014.04 is out. This reverts commit 36c4b1d98059244c34ec3327d9cc9f3c552fd01b. Signed-off-by: Tom Rini <trini@ti.com>
| * | cmd:gpt: randomly generate each partition uuid if undefinedPrzemyslaw Marczak2014-04-02-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: - randomly generate partition uuid if any is undefined and CONFIG_RAND_UUID is defined - print debug info about set/unset/generated uuid - update doc/README.gpt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com>
| * | Start the deprecation process for generic boardSimon Glass2014-03-28-0/+189
| |/ | | | | | | | | | | | | | | We should move forward to remove the old board init code. Add a prominent message to encourage maintainers to get started on this work. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-03-25-6/+28
|\ \ | |/ | | | | | | | | | | | | Trivial merge conflict, needed to manually remove local_info as per commit 41364f0f. Conflicts: board/samsung/common/board.c
| * sandbox: Add LCD driverSimon Glass2014-03-17-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a simple LCD driver which uses SDL to display the image. We update the image regularly, while still providing for reasonable performance. Adjust the common lcd code to support sandbox. For command-line runs we do not want the LCD to be displayed, so add a --show_lcd option to enable it. Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * kbuild: rename TOPDIR to stctreeMasahiro Yamada2014-03-12-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for pointing to the top of source directory. (No difference between the two.) In Kbuild style, $(srctree) is used instead. This commit renames TOPDIR to srctree and delete the defition of TOPDIR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * kirkwood: kwbimage: refactor CONFIG_SYS_KWD_CONFIGMasahiro Yamada2014-03-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull out "$(SRCTREE)/" from CONFIG_SYS_KWD_CONFIG and push it into the top Makefile. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michael Walle <michael@walle.cc> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Dave Purdy <david.c.purdy@gmail.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Cc: Luka Perkov <luka@openwrt.org> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Jason Cooper <u-boot@lakedaemon.net> Cc: Siddarth Gore <gores@marvell.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Eric Cooper <ecc@cmu.edu> Cc: Suriyan Ramasami <suriyan.r@gmail.com>
| * usb: net: update README.usb to list all USB ethernet optionsGerhard Sittig2014-03-12-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | - extend the discussion of USB network related config options such that all available adapter drivers are listed, and that the 'usb' command for the interactive prompt and scripting becomes available - suggest to *not* put individual IP configuration parameters into the exectuable, but instead to put them into external environment or fetch them from network Signed-off-by: Gerhard Sittig <gsi@denx.de> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* | video:mipidsim:fdt: Add DT support for mipi dsim driverPiotr Wilczek2014-03-12-0/+82
|/ | | | | | | | | This patch enables parsing mipi data from device tree. Non device tree case is still supported. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* m68k: Remove M5271EVB and idmr board supportMasahiro Yamada2014-03-10-7/+9
| | | | | | | | | | | | | | | | CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it as 1000000 and idmr.h defines it as (50000000 / 64). When compiling these two boards, a warning message is displayed: time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000 and should not be defined by platforms" [-Wcpp] There are no board maintainers for them so this commit just deletes them. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jason Jin <Jason.jin@freescale.com>
generated by cgit v1.1 at 2024-11-15 17:31:48 +0000