summaryrefslogtreecommitdiff
path: root/doc/device-tree-bindings
Commit message (Collapse)AuthorAgeLines
...
* spi: Fix zynq SPI bindingMichal Simek2015-07-28-16/+19
| | | | | | | | Zynq is using Cadence IP where binding is documented in the Linux kernel and there is no reason to use different binding. Synchronize it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* dm: led: Add a driver for GPIO-controlled LEDsSimon Glass2015-07-21-0/+52
| | | | | | | Add a simple driver which allows use of LEDs attached to GPIOs. The linux device tree binding is used. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add support for LEDsSimon Glass2015-07-21-0/+23
| | | | | | | | | Add a simple uclass for LEDs, so that these can be controlled by the device tree and activated when needed. LEDs are referred to by their label. This implementation requires a driver for each type of LED (e.g GPIO, I2C). Signed-off-by: Simon Glass <sjg@chromium.org>
* spi: cadence_qspi: add device tree binding docVikas Manocha2015-07-03-0/+28
| | | | | | | | This patch adds the device tree binding doc for the cadence qspi controller & also removes the not needed properties from the stv0991 device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
* spi: zynq_spi: Add fdt support in driverJagan Teki2015-07-01-0/+2
| | | | | | | | | | | | | | | | | Now zynq spi driver platform data is controlled by devicetree, enable the status by saying "okay" on respective board dts to use the devicetree generated platdata. Ex: &spi1 { status = "okay"; }; Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* dts: zynq: Add zynq spi controller nodesJagan Teki2015-07-01-0/+27
| | | | | | | | | | This patch adds zynq spi controller nodes in zynq-7000.dtsi. Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* Merge git://git.denx.de/u-boot-fdtTom Rini2015-06-05-0/+4
|\
| * fdt: Pass the device serial number through devicetreePaul Kocialkowski2015-06-05-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before device-tree, the device serial number used to be passed to the kernel using ATAGs (on ARM). This is now deprecated and all the handover to the kernel should now be done using device-tree. Thus, this passes the serial-number property to the kernel using the serial-number property of the root node, as expected by the kernel. The serial number is a string that somewhat represents the device's serial number. It might come from some form of storage (e.g. an eeprom) and be programmed at factory-time by the manufacturer or come from identification bits available in e.g. the SoC. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Simon Glass <sgj@chromium.org>
* | x86: gpio: add pinctrl support from the device treeGabriel Huau2015-06-04-0/+31
| | | | | | | | | | | | | | | | | | Every pin can be configured now from the device tree. A dt-bindings has been added to describe the different property available. Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975 Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: Document irq router device tree bindingsBin Meng2015-06-04-0/+50
|/ | | | | | | Describe all required properties needed by the irq router device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* sandbox: add: sandbox PMIC device drivers: I2C emul, pmic, regulatorPrzemyslaw Marczak2015-05-14-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds emulation of sandbox PMIC device, which includes: - PMIC I2C emulation driver - PMIC I/O driver (UCLASS_PMIC) - PMIC regulator driver (UCLASS_REGULATOR) The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes, which allows using 'i2c md' command with the default count (16). The sandbox PMIC provides regulators: - 2x BUCK - 2x LDO Each, with adjustable output: - Enable state - Voltage - Current limit (LDO1/BUCK1 only) - Operation mode (different for BUCK and LDO) Each attribute has it's own register, beside the enable state, which depends on operation mode. The header file: sandbox_pmic.h includes PMIC's default register values, which are set on i2c pmic emul driver's probe() method. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* dm: regulator: add fixed voltage regulator driverPrzemyslaw Marczak2015-05-14-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | This driver implements regulator operations for fixed Voltage/Current value regulators. beside the standard regulator constraints, which are put into the uclass platform data, a typical fixed regulator node provides few additional properties like: - gpio - gpio-open-drain - enable-active-high - startup-delay-us The only 'gpio' is used by this driver and is kept in structure of type 'fixed_regulator_platdata', as a device platform data (dev->platdata). The driver implements: - get_value - get_current - get_enable - set_enable The regulator calls and commands can be used for fixed-regulator devices, and the proper error will be returned for prohibited. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: regulator: add max77686 regulator driverPrzemyslaw Marczak2015-05-14-0/+70
| | | | | | | | | | | | | | This commit adds support to MAX77686 regulator driver, based on a driver model regulator's API. It implements almost all regulator operations, beside those for setting and geting the Current value. For proper bind and operation it requires the MAX77686 PMIC driver. New file: drivers/power/regulator/max77686.c New config: CONFIG_DM_REGULATOR_MAX77686 Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pmic: add max77686 pmic driverPrzemyslaw Marczak2015-05-14-0/+35
| | | | | | | | | | | | | | | This is the implementation of driver model PMIC driver. The max77686 PMIC driver implements read/write operations and driver bind method - to bind its childs. This driver will try to bind the regulator devices by using it's child info array with regulator prefixes and driver names. This should succeed when compatible regulator driver is compiled. If no regulator driver found, then the pmic can still provide read/write operations, and can be used with PMIC function calls. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: regulator: add implementation of driver model regulator uclassPrzemyslaw Marczak2015-05-14-0/+54
| | | | | | | | | | | | | | | | | | This commit introduces the implementation of dm regulator API. Device tree support allows for auto binding. And by the basic uclass operations, it allows to driving the devices in a common way. For detailed informations, please look into the header file. Core files: - drivers/power/regulator-uclass.c - provides regulator common functions api - include/power/regulator.h - define all structures required by the regulator Changes: - new uclass-id: UCLASS_REGULATOR - new config: CONFIG_DM_REGULATOR Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* tegra124: dts: Add host1x node to provide display informationSimon Glass2015-05-13-0/+372
| | | | | | | | This peripheral is required to get the LCD display running. Add it to tegra124 and also bring in the binding file from Linux 3.18 Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* fdt: Add binding decode function for display-timingsSimon Glass2015-05-13-0/+110
| | | | | | | | This is useful for display parameters. Add a simple decode function to read from this device tree node. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* serial: fdt: add device tree support for pl01xVikas Manocha2015-05-10-0/+7
| | | | | | | This patch adds device tree support for arm pl010/pl011 driver. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Acked-by: Simon Glass <sjg@chromium.org>
* dts: sunxi: Bring in Ethernet device tree bindingsSimon Glass2015-04-18-0/+161
| | | | | | | | Since we will use these bindings on sunxi, bring them in from Linux 4.0-rc1. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* dm: i2c: add i2c-gpio driverPrzemyslaw Marczak2015-04-18-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds driver model support to software emulated i2c bus driver. This driver supports kernel-style device tree bindings. Fdt properties in use: - compatible - "i2c-gpio" - gpios - data and clock GPIO pin phandles - delay-us - micro seconds delay between GPIOs toggle operations, which is 1/4 of I2C speed clock period. Added: - Config: CONFIG_DM_I2C_GPIO - File: drivers/i2c/i2c-gpio.c - File: doc/device-tree-bindings/i2c/i2c-gpio.txt Driver base code is taken from: drivers/i2c/soft-i2c.c, changes: - use "i2c-gpio" naming - update comments style - move preprocesor macros into functions - add device tree support - add driver model i2c support - code cleanup, - add Kconfig entry Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Added braces in i2c_gpio_xfer() to fix style nit: Signed-off-by: Simon Glass <sjg@chromium.org>
* video: exynos_fb: configure backlight GPIOs if specified in DTAjay Kumar2015-04-06-0/+2
| | | | | | | | | | Add support to configure PWM_OUT(PWM output) GPIO and BL_EN(backlight enable) GPIO, if provided in FIMD DT node. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Documentation: gpio: fix bindings documentMasahiro Yamada2015-02-19-2/+3
| | | | | | | | [ imported from Linux Kernel, commit 74981fb81d83 ] Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Simon Glass <sjg@chromium.org>
* samsung: board: support eMMC reset using DTJoonyoung Shim2015-02-13-0/+15
| | | | | | | | | | | Some exynos boards require special handling of nRESET_OUT line for eMMC memory to perform complete reboot e.g. Odroid X2/U3/XU3 boards. This will support eMMC reset using DT from reset_misc of samsung common board file. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* dm: i2c: dts: Support an offset-len device tree propertySimon Glass2015-01-29-0/+28
| | | | | | | Since U-Boot can support different offset lengths (0-4 bytes), add a device tree property to specify this. This avoids hard-coding it in the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: tegra: Bring in GPIO device tree bindingSimon Glass2015-01-29-0/+40
| | | | | | | At present the tegra GPIO driver does not fully support the existing device tree binding, but add the binding file to cover the existing partial support. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: exynos: Bring in GPIO device tree bindingSimon Glass2015-01-29-0/+41
| | | | | | | At present the exynos GPIO driver does not fully support the existing device tree binding, but add the binding file to cover the existing partial support. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Bring in GPIO device tree bindingSimon Glass2015-01-29-0/+211
| | | | | | Add the binding file that we are about to support. Signed-off-by: Simon Glass <sjg@chromium.org>
* cros-ec-keyboard: Synchronize DT binding from linuxSjoerd Simons2015-01-05-30/+23
| | | | | | | | | | | | | | | | | | The ChromeOS EC keyboard is used by various different chromebooks. Peach pi being the third board in the u-boot tree to use it (snow and peach pit the other two). Rather then embedding the same big DT node in the peach-pi DT again, copy the dtsi snippit & bindings documentation from linux and include it in all 3 boards. This slightly changes the dt bindings in u-boot: * google,key-rows becomes keypad,num-rows * google,key-colums becomes keypad,num-colums * google,repeat-delay-ms and google,repeat-rate-ms are no longer used and replaced by hardcoded values (similar to tegra kbc) Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Add initial video device init for Intel GMASimon Glass2014-11-25-0/+40
| | | | | | | | | Intel's Graphics Media Accelerator (GMA) is a generic name for a wide range of video devices. Add code to set up the hardware on ivybridge. Part of the init happens in native code, part of it happens in a 16-bit option ROM for those nostalgic for the 1970s. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add SATA initSimon Glass2014-11-25-0/+26
| | | | | | Add code to set up the SATA interfaces on boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add additional LPC initSimon Glass2014-11-25-3/+44
| | | | | | | Set up all the remaining pieces of the LPC (low-pin-count) peripheral in PCH (Peripheral Controller Hub). Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add early LPC init so that serial worksSimon Glass2014-11-21-0/+23
| | | | | | | | The PCH (Platform Controller Hub) includes an LPC (Low Pin Count) device which provides a serial port. This is accessible on Chromebooks, so enable it early in the boot process. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: spi: Add soft_spi implementationSimon Glass2014-10-22-0/+34
| | | | | | | | Add a new implementation of soft_spi that uses device tree to specify the GPIOs. This will replace soft_spi_legacy for boards which use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* sandbox: dts: Add a SPI device and cros_ec deviceSimon Glass2014-10-22-0/+25
| | | | | | | | | | | Add a SPI device which can be used for testing SPI flash features in sandbox. Also add a cros_ec device since with driver model the Chrome OS EC emulation will not otherwise be available. Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2014-09-13-0/+23
|\
| * dm: serial: Add driver model support for ns16550Simon Glass2014-09-10-0/+10
| | | | | | | | | | | | | | | | | | | | Add driver model support so that ns16550 can support operation both with and without driver model. The driver needs a clock frequency so cannot stand alone unfortunately. The clock frequency must be provided by a separate driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * sandbox: dts: Add a serial console nodeSimon Glass2014-09-10-0/+13
| | | | | | | | | | | | | | | | If the sandbox device tree is provided to U-Boot (with the -d flag) then it will use the device tree version in preference to the built-in device. The only difference is the colour. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: exynos_fimd: Add framework to disable FIMD sysmmuAjay Kumar2014-09-05-0/+6
|/ | | | | | | | | | | On Exynos5420 and newer versions, the FIMD sysmmus are in "on state" by default. We have to disable them in order to make FIMD DMA work. This patch adds the required framework to exynos_fimd driver, and disables FIMD sysmmu on Exynos5420. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* spi: Support half-duplex mode in FDT decodeSimon Glass2014-08-06-0/+2
| | | | | | | | This parameter should also be supported. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* power: Add support for TPS65090 PMU chip.Tom Wai-Hong Tam2014-05-28-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds driver support for the TPS65090 PMU. Support includes hooking into the pmic infrastructure so that the pmic commands can be used on the console. The TPS65090 supports the following functionality: - fet enable/disable/querying - getting and setting of charge state Even though it is connected to the pmic infrastructure it does not hook into the pmic charging charging infrastructure. The device tree binding is from Linux, but only a small subset of functionality is supported. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Signed-off-by: Rong Chang <rongchang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMCJaehoon Chung2014-05-16-4/+4
| | | | | | | | Exynos serise can be supported the dw-mmc controller. So, it's good that used the general prefix as "_EXYNOS_DWMMC". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-03-25-0/+13
|\ | | | | | | | | | | | | | | Trivial merge conflict, needed to manually remove local_info as per commit 41364f0f. Conflicts: board/samsung/common/board.c
| * sandbox: Add LCD driverSimon Glass2014-03-17-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a simple LCD driver which uses SDL to display the image. We update the image regularly, while still providing for reasonable performance. Adjust the common lcd code to support sandbox. For command-line runs we do not want the LCD to be displayed, so add a --show_lcd option to enable it. Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | video:mipidsim:fdt: Add DT support for mipi dsim driverPiotr Wilczek2014-03-12-0/+82
|/ | | | | | | | | This patch enables parsing mipi data from device tree. Non device tree case is still supported. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* spi: Add device tree binding for SPI busSimon Glass2013-12-09-0/+92
| | | | | | This was obtained from Linux 3.12 commit 5e01dc7b26. Signed-off-by: Simon Glass <sjg@chromium.org>
* cros: adds cros_ec keyboard driverHung-ying Tyan2013-06-26-0/+79
| | | | | | | | | | This patch adds the driver for keyboard that's controlled by ChromeOS EC. Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* cros: add cros_ec driverHung-ying Tyan2013-06-26-0/+38
| | | | | | | | | | | | | | | | | | | This patch adds the cros_ec driver that implements the protocol for communicating with Google's ChromeOS embedded controller. Signed-off-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org> Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-06-22-0/+54
|\
| * EXYNOS5: FDT: Add DWMMC device node dataAmar2013-06-13-0/+54
| | | | | | | | | | | | | | | | | | | | | | This patch adds DWMMC device node data for exynos5. This patch also adds binding file for DWMMC device node. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Amar <amarendra.xt@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | lcd: add functions to set up simplefb device treeStephen Warren2013-06-05-0/+25
|/ | | | | | | | | | | | | | | | simple-framebuffer is a new device tree binding that describes a pre- configured frame-buffer memory region and its format. The Linux kernel contains a driver that supports this binding. Implement functions to create a DT node (or fill in an existing node) with parameters that describe the framebuffer format that U-Boot is using. This will be immediately used by the Raspberry Pi board in U-Boot, and likely will be used by the Samsung ARM ChromeBook support soon too. It could well be used by many other boards (e.g. Tegra boards with built-in LCD panels, which aren't yet supported by the Linux kernel). Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-06 16:30:14 +0000