summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* Patch by Gary Jennejohn, 09 Sep 2004:wdenk2004-09-21-0/+24
| | | | allow to use USART1 as console port on at91rm9200dk boards
* Add support for IDS "NC650" boardwdenk2004-08-28-1/+1
|
* Patches by Lars Munch, 12 Jul 2004:wdenk2004-08-02-845/+9
| | | | | | | - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk board specific - split out the LXT971A PHY from ns_9750_eth.h - split the dm9161 phy part out of at91rm9200_ether.c
* Patch by Jon Loeliger, 16 Jul 2004:wdenk2004-08-01-212/+314
| | | | | | | | | | | | | - support larger DDR memories up to 2G on the PC8540/8560ADS and STXGP3 boards - Made MPC8540/8560ADS be 33Mhz PCI by default. - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 and CONFIG_L2_INIT_RAM options. - Refactor Local Bus initialization out of SDRAM setup. - Re-implement new version of LBC11/DDR11 errata workarounds. - Moved board specific PCI init parts out of CPU directory. - Added TLB entry for PCI-1 IO Memory - Updated README.mpc85xxads
* * Code cleanupwdenk2004-08-01-1296/+688
| | | | | | | | | | | | | * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
* cpu/ppc4xx/sdram.c rewritten now using get_ram_size()stroese2004-07-15-227/+38
|
* Patch by Mark Jonas, 02 Jul 2004:wdenk2004-07-12-7/+7
| | | | Fix lowboot (again) on MPC5xxx
* Patch by Curt Brune, 07 Jul 2004:wdenk2004-07-11-45/+55
| | | | relocate exception vectors on arm720t if needed
* * Patch by George G. Davis, 06 Jul 2004:wdenk2004-07-11-30/+91
| | | | | | | | - update mach-types.h to latest arm.linux.org.uk master list - Set correct OMAP1610 bi_arch_number for build target * Patch by Curt Brune, 06 Jul 2004: evb4510: add support for timer interrupt; cleanup
* Patch by Mark Jonas, 01 Jul 2004:wdenk2004-07-11-0/+17
| | | | | Added support for Total5100 and Total5200 (Rev.1 and Rev.2) MGT5100 and MPC5200 based Freescale platforms.
* * Patch by Martin Krause, 30 Jun 2004:wdenk2004-07-11-6/+11
| | | | | | | Add support for TQM5200 board * Patch by Martin Krause, 29 Jun 2004: Add loopw command: infinite write loop on address range
* * Patch by Fred Klatt, 25 Jun 2004:wdenk2004-07-10-12/+14
| | | | | | | | | | | | Add support for WindRiver's SBC8560 board * Patch by Nicolas Lacressonniere, 24 Jun 2004 Small Bugs fixes for "at91rm9200dk" board: - Timing modifications for SPI DataFlash access - Fix NAND flash detection bug * Patch by Nicolas Lacressonniere, 24 Jun 2004: Add Support for Flash AT49BV6416 for AT91RM9200DK board
* Patch by Jon Loeliger, 17 June 2004:wdenk2004-07-09-98/+84
| | | | | | | | Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
* * Patch by Yuli Barcohen, 16 Jun 2004:wdenk2004-07-09-2/+1
| | | | | | | | Remove obsolete AdderII port which was superseded by unified AdderII/Adder87x port * Patch by Ladislav Michl, 16 Jun 2004: Fix gcc-3.3.3 warnings for smc91111.c
* Fix problem in 405 i2c driver; don't try to print without console!stroese2004-07-02-1/+3
|
* Fix bug in 405 ethernet driver; allocated data not cleared!stroese2004-07-02-0/+2
|
* Patch by Andrea Marson, 11 Jun 2004:wdenk2004-07-01-2/+7
| | | | | | | Update for PPChameleon board: - support for SysClk @ 25MHz - support for Silicon Motion SM712 VGA controller - some clean ups
* * Code cleanup (ARM mostly)wdenk2004-07-01-240/+403
| | | | | | * Patch by Curt Brune, 17 May 2004: - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC) - Add support for ESPD-Inc. EVB4510 Board
* * Fix "cls" command when used with splash screenwdenk2004-06-30-1/+3
| | | | | * Increase NFS download timeout (now 1 min - 10 sec is to short for a slow download of a big image)
* Add "cls" function to MPC823 LCD driver so we can reinitialize thewdenk2004-06-25-10/+27
| | | | display even after showing a bitmap
* Patch by Josef Wagner, 04 Jun 2004:wdenk2004-06-19-23/+9
| | | | | | | | | | - DDR Ram support for PM520 (MPC5200) - support for different flash types (PM520) - USB / IDE / CF-Card / DiskOnChip support for PM520 - 8 bit boot rom support for PM520/CE520 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245) - I2C and RTC support for CPC45 - support of new flash type (28F160C3T) for CPC45
* * Fix flash parameters passed to Linux for PPChameleon boardwdenk2004-06-17-0/+2
| | | | * Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
* * Patch by Paul Ruhland, 10 Jun 2004:wdenk2004-06-10-10/+10
| | | | | | | | fix support for Logic SDK-LH7A404 board and clean up the LH7A404 register macros. * Patch by Matthew McClintock, 10 Jun 2004: Modify code to select correct serial clock on Sandpoint8245
* * Patch by Yuli Barcohen, 09 Jun 2004:wdenk2004-06-09-0/+1037
| | | | | | | Add support for Analogue&Micro Adder87x and the older AdderII board. * Patch by Ming-Len Wu, 09 Jun 2004: Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
* Patch by Sam Song, 09 Jun 2004:wdenk2004-06-09-0/+9
| | | | | | - Add support for RPXlite_DW board - Update FLASH driver for 4*AM29DL323DB90VI - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
* * Patch by Mark Jonas, 08 June 2004:wdenk2004-06-09-2/+23
| | | | | | | | - Make MPC5200 boards evaluate the SVR to print processor name and version in checkcpu() (cpu/mpc5xxx/cpu.c). * Patch by Kai-Uwe Bloem, 06 May 2004: Fix endianess problem in cramfs code
* * Patch by Martin Krause, 27 May 2004:wdenk2004-06-09-0/+1
| | | | | | | Fix a MPC5xxx I2C timing issue in i2c_probe(). * Patch by Leif Lindholm, 27 May 2004: Fix board_init_f() for dbau1x00 board.
* * Patch by Paul Ruhland, 17 May 2004:wdenk2004-06-09-1/+1272
| | | | | | | | | | | | - Add support for the Logic Zoom LH7A40x based SDK board(s), specifically the LPD7A400. * Patches by Robert Schwebel, 15 May 2004: - call MAC address reading code also for SMSC91C111; - make SMSC91C111 timeout configurable, remove duplicate code - fix get_timer() for PXA - update doc/README.JFFS2 - use "bootfile" env variable also for jffs2
* Patches Part 1 by Jon Loeliger, 11 May 2004:wdenk2004-06-09-407/+1041
| | | | | | | | | | | | | | | | | | | | | | Dynamically handle REV1 and REV2 MPC85xx parts. (Jon Loeliger, 10-May-2004). New consistent memory map and Local Access Window across MPC85xx line. New CCSRBAR at 0xE000_0000 now. Add RAPID I/O memory map. New memory map in README.MPC85xxads (Kumar Gala, 10-May-2004) Better board and CPU identification on MPC85xx boards at boot. (Jon Loeliger, 10-May-2004) SDRAM clock control fixes on MPC8540ADS & MPC8560 boards. Some configuration options for MPC8540ADS & MPC8560ADS cleaned up. (Jim Robertson, 10-May-2004) Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver. Supports multiple PHYs. (Andy Fleming, 10-May-2004) Some README.MPC85xxads updates. (Kumar Gala, 10-May-2004) Copyright updates for "Freescale" (Andy Fleming, 10-May-2004)
* Patch by Markus Pietrek, 04 May 2004:wdenk2004-06-09-8/+0
| | | | | Fix clear_bss code for ARM systems (all except s3c44b0 which doesn't clear BSS at all?)
* Patch by Pantelis Antoniou, 5 May 2004:wdenk2004-06-07-1/+1
| | | | | - Intracom board update. - Add Codec POST.
* Add support for the second Ethernet interface for the 'PPChameleon' board.wdenk2004-06-06-353/+494
|
* * Patch by Dave Peverley, 30 Apr 2004:wdenk2004-06-06-1/+3
| | | | | | | | | | | | | | Add support for OMAP730 Perseus2 Development board * Patch by Alan J. Luse, 29 Apr 2004: Fix flash chip-select (OR0) option register setting on FADS boards. * Patch by Alan J. Luse, 29 Apr 2004: Report MII network speed and duplex setting properly when auto-negotiate is not enabled. * Patch by Jarrett Redd, 29 Apr 2004: Fix hang on reset on Ocotea board due to flash in wrong mode.
* Patch by Yuli Barcohen, 19 Apr 2004:wdenk2004-06-06-18/+35
| | | | | | | - Rename DUET_ADS to MPC885ADS - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY - Clean up FADS family port to use the new defines
* Patch by Scott McNutt, 25 Apr 2004:wdenk2004-05-19-17/+138
| | | | | | | Add Nios GDB/JTAG Console support: - Add stubs to support gdb via JTAG. - Add support for console over JTAG. - Minor cleanup.
* Patch by Klaus Heydeck, 12 May 2004:wdenk2004-05-12-0/+11
| | | | | | Using external watchdog for KUP4 boards in mpc8xx/cpu.c; load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c; various changes to KUP4 board specific files
* Fix minor network problem on MPC5200wdenk2004-05-12-22/+64
|
* * Fix config option spelling in PM520 config filewdenk2004-05-05-3/+4
| | | | | * Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by patches by Pantelis Antoniou, 30 Mar 2004)
* * Fix minor NAND JFFS2 related issuewdenk2004-05-03-1/+1
| | | | | | | | | * Fixes for SL811 USB controller: - implement workaround for broken memory stick - improve error handling * Increase packet send timeout to 10 ms in cpu/mpc8xx/scc.c to better cope with congested networks.
* * Back out Patch by Christian Hohnstaedt, 23 Apr 2004:wdenk2004-04-25-3/+19
| | | | | | | | | (JFFS2 speed enhancements) because of using non-public data (PHYS_FLASH_SECT_SIZE) * Patch by Travis Sawyer, 23 Apr 2004: Fix VSC/CIS 8201 phy descrambler interoperability timing due to errata from Vitesse Semiconductor.
* * Patch by Christian Hohnstaedt, 23 Apr 2004:wdenk2004-04-25-31/+30
| | | | | | | | | | | | | | | | | | | | | | JFFS2 speed enhancements: - repair header CRC calculation in jffs2_1pass.c - add eraseblock size to the partition information to skip empty eraseblocks if we find more then 4k of free space. - The JFFS2 scanner is now fast enough to remove the spinning wheel so #ifdef-ed out. - add watchdog calls in long running loops * Patch by Philippe Robin, 22 Apr 2004: Fix ethernet configuration for "versatile" board * Patch by Kshitij Gupta, 21 Apr 2004: Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards * Patch by Steven Scholz, 24 Feb 2004: Fix a bug in AT91RM9200 ethernet driver: The MII interface is now initialized before accessing the PHY. * Cleanup PCI ID's
* Clean up the TQM8xx_YYMHz configurations; allow to use the samewdenk2004-04-24-0/+28
| | | | | | binary image for all clock frequencies. Implement run-time optimization of flash access timing based on the actual bus frequency.
* * Temporarily disabled John Kerl's extended MII command code becausewdenk2004-04-18-12/+8
| | | | | | | | | | | "miivals.h" is missing * Patches by Mark Jonas, 13 Apr 2004: - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S - Add sync instructions to IceCube SDRAM init code - Move SDRAM chip constants into seperate include files - Unify DDR and SDR initialization code - Unify all IceCube (Lite5xxx) target names
* * Patch by Dan Malek, 07 Apr 2004:wdenk2004-04-18-32/+127
| | | | | | | | | | | | | | | | | - Add support for RPC/STx GP3, Motorola 8560 board - Update 85xx TSEC driver so it searches MII for first available PHY and uses that one. - Add functions to support console MII commands. * Patch by Tolunay Orkun, 07 Apr 2004: Move initialization of bi_iic_fast[] from board_init_f() to board_init_r() * Patch by Yasushi Shoji, 07 Apr 2004: Cleanup microblaze port * Patch by Sangmoon Kim, 07 Apr 2004: Add auto SDRAM module detection for Debris board
* * Add missing microblaze header fileswdenk2004-04-18-2/+2
| | | | | | * Patch by Rune Torgersen, 06 Apr 2004: - Fix some PCI problems on the MPC8266ADS board - Fix the location of some PCI entries in the immap structure
* * Patch by Yasushi Shoji, 07 Apr 2004:wdenk2004-04-18-0/+136
| | | | | - add support for microblaze processors - add support for AtmarkTechno "suzaku" board
* * Cleanup, minor fixeswdenk2004-04-18-3/+3
| | | | | | | | | * Patch by Rune Torgersen, 16 Apr 2004: LBA48 fixes * Patches by Pantelis Antoniou, 16 Apr 2004: - Fix some compile problems; add "once" functionality for the netretry variable
* Patches by Pantelis Antoniou, 16 Apr 2004:wdenk2004-04-18-24/+53
| | | | | | | | | | | | | | | | | - add support for a new version of an Intracom board and fix various other things on others. - add verify support to the crc32 command (define CONFIG_CRC32_VERIFY to enable it) - fix FEC driver for MPC8xx systems: 1. fix compilation problems for boards that use dynamic allocation of DPRAM 2. shut down FEC after network transfers - HUSH parser fixes: 1. A new test command was added. This is a simplified version of the one in the bourne shell. 2. A new exit command was added which terminates the current executing script. 3. Fixed handing of $? (exit code of last executed command)
* Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-229/+459
| | | | | | | | | | | | Improve and fix various things in the MPC8xx FEC driver: 1. The new 87x and 88x series of processors have two FECs, and the new driver supports them both. 2. Another change in the 87x/88x series is support for the RMII (Reduced MII) interface. However numerous changes are needed to make it work since the PHYs are connected to the same lines. That means that you have to address them correctly over the MII interface.
* * Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-1/+5
| | | | | | | | | | - add auto-complete support to the U-Boot CLI - add support for NETTA and NETPHONE boards; fix NETVIA board * Patch by Yuli Barcohen, 28 Mar 2004: - Add support for MPC8272 family including MPC8247/8248/8271/8272 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) - Change configuration method for MPC8260ADS family
generated by cgit v1.1 at 2024-12-15 17:09:24 +0000