summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* [PATCH] Add support for the AMCC Katmai (440SPe) eval boardStefan Roese2007-02-20-8/+64
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM supportStefan Roese2007-02-20-0/+2943
| | | | | | | | | | | | | | | | | This patch adds support for the DDR2 controller used on the 440SP and 440SPe. It is tested on the Katmai (440SPe) eval board and works fine with the following DIMM modules: - Corsair CM2X512-5400C4 (512MByte per DIMM) - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) This patch also adds the nice functionality to dynamically create the TLB entries for the SDRAM (tlb.c). So we should never run into such problems with wrong (too short) TLB initialization again on these platforms. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 filesStefan Roese2007-02-20-413/+478
| | | | | | | | | | Since the existing 4xx SPD SDRAM initialization routines for the 405 SDRAM controller and the 440 DDR controller don't have much in common this patch splits both drivers into different files. This is in preparation for the 440 DDR2 controller support (440SP/e). Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] PPC4xx: Add support for multiple I2C bussesStefan Roese2007-02-20-213/+245
| | | | | | | | | | | | | | This patch adds support for multiple I2C busses on the PPC4xx platforms. Define CONFIG_I2C_MULTI_BUS in the board config file to make use of this feature. It also merges the 405 and 440 i2c header files into one common file 4xx_i2c.h. Also the 4xx i2c reset procedure is reworked since I experienced some problems with the first access on the 440SPe Katmai board. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boardsStefan Roese2007-02-02-6/+10
| | | | | | | | Previously the strapping DCR/SDR was read to determine if the internal PCI arbiter is enabled or not. This strapping bit can be overridden, so now the current status is read from the correct DCR/SDR register. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Update 440EPx/440GRx cpu detectionStefan Roese2007-01-31-4/+8
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* LPC2292 SODIMM port coding style cleanup.Wolfgang Denk2007-01-30-5/+5
|
* Add port for the lpc2292sodimm evaluation board from EmbeddedArtistsGary Jennejohn2007-01-24-3/+174
|
* Merge with /home/tur/proj/idmr/u-bootWolfgang Denk2007-01-24-1/+33
|\
| * [ColdFire MCF5271 family] Add CPU detection based on the value of ChipBartlomiej Sieka2007-01-23-1/+33
| | | | | | | | Identification Register (CIR).
* | Merge with /home/hs/SC3/u-boot-devWolfgang Denk2007-01-19-6/+3
|\ \
| * | [PATCH] Fix: Compilerwarnings for SC3 board.Heiko Schocher2007-01-18-6/+3
| | | | | | | | | | | | | | | | | | | | | The EBC Configuration Register is now by CFG_EBC_CFG definable Added JFFS2 support for the SC3 board. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | [PATCH] Add support for AMCC Taishan PPC440GX eval boardStefan Roese2007-01-18-76/+104
|/ / | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge with /home/hs/SC3/u-bootWolfgang Denk2007-01-15-6/+15
|\ \ | | | | | | | | | Some code cleanup.
| * | Added support for the SOLIDCARD III board from EurodesignHeiko Schocher2007-01-11-2/+7
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Merge with /home/hs/MAN/u-boot-devWolfgang Denk2007-01-15-4/+5
|\ \ \
| * | | [PATCH] Add support for the UC101 board from MAN.Heiko Schocher2006-12-21-4/+5
| | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | [PATCH] Fix 440SPe rev B detection from previous patchStefan Roese2007-01-15-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-srStefan Roese2007-01-13-2/+11
|\ \ \ \
| * | | | SMC1 uses external CLK4 instead of BRG on spc1920Markus Klotzbuecher2007-01-09-2/+11
| | | | |
* | | | | [PATCH] Update 440SP(e) cpu revisionsStefan Roese2007-01-13-4/+24
|/ / / / | | | | | | | | | | | | | | | | | | | | Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)Stefan Roese2007-01-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem with an incorrect setup for the refresh timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c Signed-off-by: Stefan Roese <sr@denx.de>
* | | | [PATCH] Add DDR2 optimization code for Sequoia (440EPx) boardStefan Roese2007-01-05-3/+0
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | This code will optimize the DDR2 controller setup on a board specific basis. Note: This code doesn't work right now on the NAND booting image for the Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge with /home/hs/TQ/u-boot-devWolfgang Denk2006-12-24-3/+64
|\ \ \ | |_|/ |/| |
| * | Added support for the TQM8272 board from TQHeiko Schocher2006-12-21-3/+64
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Preliminary support for the iDMR board (ColdFire).Bartlomiej Sieka2006-12-20-1/+1
| |/ |/|
* | Code cleanup.Wolfgang Denk2006-11-30-11/+11
| |
* | Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.gitWolfgang Denk2006-11-30-719/+818
|\ \
| * \ Merge http://www.denx.de/git/u-bootKim Phillips2006-11-28-46/+47
| |\ \
| * | | mpc83xx: Miscellaneous code style fixesTimur Tabi2006-11-28-87/+32
| | | | | | | | | | | | | | | | | | | | | | | | Implement various code style fixes and similar changes. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: Update 83xx to use fsl_i2c.cTimur Tabi2006-11-03-426/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. Added multiple I2C bus support to fsl_i2c.c. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: Replace CFG_IMMRBAR with CFG_IMMRTimur Tabi2006-11-03-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx tree matches the other 8xxx trees. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: Lindent and clean up cpu/mpc83xx/speed.cKim Phillips2006-11-03-79/+82
| | | |
| * | | mpc83xx: Fix the incorrect dcbz operationDave Liu2006-11-03-34/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 834x rev1.x silicon has one CPU5 errata. The issue is when the data cache locked with HID0[DLOCK], the dcbz instruction looks like no-op inst. The right behavior of the data cache is when the data cache Locked with HID0[DLOCK], the dcbz instruction allocates new tags in cache. The 834x rev3.0 and later and 8360 have not this bug inside. So, when 834x rev3.0/8360 are working with ECC, the dcbz instruction will corrupt the stack in cache, the processor will checkstop reset. However, the 834x rev1.x can work with ECC with these code, because the sillicon has this cache bug. The dcbz will not corrupt the stack in cache. Really, it is the fault code running on fault sillicon. This patch fix the incorrect dcbz operation. Instead of CPU FP writing to initialise the ECC. CHANGELOG: * Fix the incorrect dcbz operation instead of CPU FP writing to initialise the ECC memory. Otherwise, it will corrupt the stack in cache, The processor will checkstop reset. Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | mpc83xx: change ft code to modify local-mac-address propertyKim Phillips2006-11-03-2/+2
| | | | | | | | | | | | | | | | | | | | Update 83xx OF code to update local-mac-address properties for ethernet instead of the obsolete 'address' property.
| * | | mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and ↵Timur Tabi2006-11-03-84/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC8360EMDS This patch also adds an improved I2C set_speed(), which handles all clock frequencies. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: add QE ethernet supportDave Liu2006-11-03-7/+120
| | | | | | | | | | | | | | | | this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
| * | | mpc83xx: Add MPC8360EMDS basic board supportDave Liu2006-11-03-258/+309
| | | | | | | | | | | | | | | | | | | | Add support for the Freescale MPC8360EMDS board. Includes DDR, DUART, Local Bus, PCI.
| * | | mpc83xx: Add support for the MPC8349E-mITXTimur Tabi2006-11-03-3/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" CHANGELOG: * Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | Multi-bus I2C implementation of MPC834xBen Warren2006-11-03-24/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Attached is a patch implementing multiple I2C buses on the MPC834x CPU family and the MPC8349EMDS board in particular. This patch requires Patch 1 (Add support for multiple I2C buses). Testing was performed on a 533MHz board. /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> CHANGELOG: Implemented driver-level code to support two I2C buses on the MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds are 50kHz, 100kHz and 400kHz on each bus. regards, Ben
| * | | mpc83xx: Add support for Errata DDR6 on MPC 834x systemsTimur Tabi2006-11-03-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CHANGELOG: * Errata DDR6, which affects all current MPC 834x processors, lists changes required to maintain compatibility with various types of DDR memory. This patch implements those changes. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: Add support for variable flash memory sizes on 83xx systemsTimur Tabi2006-11-03-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CHANGELOG: * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access window registers, instead of using a hard-coded value of 8MB. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: Changed to unified mpx83xx names and added common 83xx changesDave Liu2006-11-03-131/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorporated the common unified variable names and the changes in preparation for releasing mpc8360 patches. Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | mpc83xx: Removed unused file resetvec.S for mpc83xx cpuTanya Jiang2006-11-03-7/+1
| | |/ | |/| | | | | | | | | | | | | Removed unused file resetvec.S for mpc83xx cpu Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
* | | [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripheralsGrant Likely2006-11-29-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, not the XLB frequency. This patch depends on the previous patches for MPC52xx device tree support Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
* | | [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boardsStefan Roese2006-11-29-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese <sr@denx.de>
* | | [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.Stefan Roese2006-11-28-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the code and configuration necessary to boot with an arch/powerpc Linux kernel. Signed-off-by: Grant Likely <grant.likely@gmail.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* | | [PATCH] PPC4xx: 440SP Rev. C detection addedStefan Roese2006-11-28-0/+4
| |/ |/| | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge with /home/sr/git/u-boot/denx-alpr-merge-testWolfgang Denk2006-11-27-31/+31
|\ \
| * | [PATCH] 4xx: Fix problem with board specific reset code (now for real)Stefan Roese2006-11-27-1/+2
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-12-28 17:55:42 +0000