summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* * Patch by Ronen Shitrit, 10 Dec 2003:wdenk2004-01-03-48/+104
| | | | | | | Add support for the Marvell DB64360 / DB64460 development boards * Patch by Detlev Zundel, 10 Dec 2003: fix dependency problem in examples/Makefile
* * Patch by Denis Peter, 8 Dec 2003wdenk2004-01-02-1/+532
| | | | | | | | | | - add support for the PATI board (MPC555) - add SPI support for the MPC5xx * Patch by Anders Larsen, 08 Dec 2003: add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; cleanup some redundand #defines
* * Patch by André Schwarz, 8 Dec 2003:wdenk2004-01-02-2/+7
| | | | | | | | | | | | | | fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM): - TX and RX deskriptors must be quad-word aligned - does not work with only one TX deskriptor - standard reset method does not work * Patch by Masami Komiya, 08 Dec 2003: add RTL8139 ethernet driver * Patches by Ed Okerson, 07 Dec 2003: - fix ethernet for the AU1x00 processors in little-endian mode. - extend memsetup.S for the AU1x00 processors in BE and LE modes
* * Cleanup lowboot code for MPC5200wdenk2004-01-02-170/+165
| | | | | | | | | | | | | | | | | | * Minor code cleanup (coding style) * Patch by Reinhard Meyer, 30 Dec 2003: - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, - added CONFIG_PHY_ADDR to include/configs/IceCube.h, - turned debug print of PHY registers into a function (called in two places) - added support for EMK MPC5200 based modules * Fix MPC8xx PLPRCR_MFD_SHIFT typo * Add support for TQM866M modules * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) * Fix a few compiler warnings
* Cleanupwdenk2003-12-27-47/+42
|
* * Make CPU clock on ICA-IP board controllable by a "cpuclk"wdenk2003-12-27-5/+20
| | | | | | | | | | | | | | environment variable which can set to "100", "133", or "150". The CPU clock will be configured accordingly upon next reboot. Other values are ignored. In case of an invalid or undefined "cpuclk" value, the compile-time default CPU clock speed will be used. * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory window that is used to access the UART registers by the Linux driver) * Patch by Reinhard Meyer, 20 Dec 2003: Fix clock calculation for the MPC5200 for higher clock frequencies (above 2**32 / 10 = 429.5 MHz).
* Debug printf's removed.stroese2003-12-09-0/+6
|
* Updated for PPC405EP boards (2 banks only).stroese2003-12-09-0/+8
|
* BUBINGA405EP port fixed.stroese2003-12-09-2/+82
|
* * Patch by Bernhard Kuhn, 28 Nov 2003:wdenk2003-12-08-0/+981
| | | | | add support for Coldfire CPU add support for Motorola M5272C3 and M5282EVB boards
* Patch by Wolter Kamphuis, 05 Dec 2003:wdenk2003-12-07-310/+329
| | | | Add support for SNMC's QS850/QS823/QS860T boards
* * Patch by Yuli Barcohen, 3 Dec 2003:wdenk2003-12-07-4/+2
| | | | | | | | | | "revive" U-Boot support for old Motorola MPC860ADS board * Patch by Cam(ilo?), 03 Dec 2003: make examples build even with broken Montavista objcopy * Patch by Pavel Bartusek, 27 Nov 2003: fix conversion problem with "bootretry" evironment variable
* * Patch by Andre Schwarz, 24 Nov 2003:wdenk2003-12-07-0/+11
| | | | | | | | | | add support for mvblue (mvBlueLYNX and mvBlueBOX) boards * Patch by Pavel Bartusek, 21 Nov 2003: set ZMII bridge speed on 440 * Patch by Anders Larsen, 17 Nov 2003: Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
* * Patches by David Müller, 14 Nov 2003:wdenk2003-12-07-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - board/mpl/common/common_util.c * implement support for BZIP2 compressed images * various cleanups (printf -> puts, ...) - board/mpl/common/flash.c * report correct errors to upper layers * check the erase fail and VPP low bits in status reg - board/mpl/vcma9/cmd_vcma9.c - board/mpl/vcma9/flash.c * various cleanups (printf -> puts, ...) - common/cmd_usb.c * fix typo in comment - cpu/arm920t/usb_ohci.c * support for S3C2410 is missing in #if line - drivers/cs8900.c * reinit some registers in case of error (cable missing, ...) - fs/fat/fat.c * support for USB/MMC devices is missing in #if line - include/configs/MIP405.h - include/configs/PIP405.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support - include/configs/VCMA9.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support * enable USB support - lib_arm/armlinux.c * change calling convention of ARM Linux kernel as described on http://www.arm.linux.org.uk/developer/booting.php * Patch by Thomas Lange, 14 Nov 2003: Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to support all these AMD boards. * Patch by Thomas Lange, 14 Nov 2003: Workaround for mips au1x00 physical memory accesses (the au1x00 uses a 36 bit bus internally and cannot access physical memory directly. Use the uncached SDRAM address instead of the physical one.)
* * Patch by Nicolas Lacressonnière, 12 Nov 2003:wdenk2003-12-06-26/+122
| | | | | | | | | | | | | | update for for Atmel AT91RM9200DK development kit: - support for environment variables in DataFlash - Atmel DataFlash AT45DB1282 support * Patch by Jeff Carr, 11 Nov 2003: add support for new version of 8270 processors * Patches by George G. Davis, 05 Nov 2003: - only pass the ARM linux initrd tag to the kernel when an initrd is actually present - update omap1510inn configuration file
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-06-980/+225
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* Add support for BMS2003 boardwdenk2003-11-25-6/+18
| | | | | (featuring a NEC NL6448BC33-54. 10.4", 640x480 TFT display). Fix NEC display names (it's 6440 [for 640x480], not 6640).
* * Use "-fPIC" instead of "-mrelocatable" to prevent problems withwdenk2003-11-17-13/+9
| | | | | | | | | | | | | recent tools * Add checksum verification to 'imls' command * Add bd_info fields needed for 4xx Linux I2C driver * Patch by Martin Krause, 4 Nov. 2003: Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) * Print used network interface when CONFIG_NET_MULTI is set
* * Patch by Bernhard Kuhn, 28 Oct 2003:wdenk2003-11-07-3/+50
| | | | | | | | Add low boot support for MPC5200 * Fix problem with dual PCMCIA support (NSCU) * Fix MPC5200 I2C initialization function
* * Fix parameter passing to standalone images with bootm commandwdenk2003-10-30-0/+5
| | | | | | | | | | * Patch by Kyle Harris, 30 Oct 2003: Fix build errors for ixdp425 board * Patch by David M. Horn, 29 Oct 2003: Fixes to build under CYGWIN * Get IceCube MGT5100 working (again)
* * Patch by Xiao Xianghua, 23 Oct 2003:wdenk2003-10-26-2/+4
| | | | | | | | small patch for mpc85xx * Fix small problem in MPC5200 I2C driver * Fix FCC3 support on ATC board
* Fix PCI problems on PPChameleon boardwdenk2003-10-22-1/+4
|
* * Patch by Steven Scholz, 18 Oct 2003:wdenk2003-10-19-26/+49
| | | | | | | | | | | | | | | | | | | | | Fix AT91RM9200 ethernet driver * Patch by Nye Liu, 17 Oct 2003: Fix typo in include/mpc8xx.h * Patch by Richard Woodruff, 16 Oct 03: Fixes for cpu/arm925/interrupt.c - Initialize timestamp & lastdec vars. - fix timestamp overflows. - fix lastdec overflow. - smarter normalization to allow udelay() below 1ms to work. * Patch by Scott McNutt, 16 Oct add networking support for the Altera Nios Development Kit, Cyclone Edition (DK-1C20) * Patch by Jon Diekema, 14 Oct 2003: add hint about doc/README.silent to README file
* * Patches by Xianghua Xiao, 15 Oct 2003:wdenk2003-10-15-171/+4766
| | | | | | | | - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
* * Make sure HUSH is initialized for running auto-update scriptswdenk2003-10-14-1/+1122
| | | | | | | | | | | * Make 5200 reset command _really_ reset the board, without running any other code after it * Fix flash mapping and display on P3G4 board * Patch by Kyle Harris, 15 Jul 2003: - add support for Intel IXP425 CPU - add support for IXDP425 eval board
* * Patch by Steven Scholz, 10 Oct 2003wdenk2003-10-09-5/+358
| | | | | | | | | | - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32)
* * Patch by Scott McNutt, 04 Oct 2003:wdenk2003-10-08-0/+1162
| | | | | | | | | | | | | | | | | | - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board
* * Patch by Yuli Barcohen, 25 Sep 2003:wdenk2003-10-08-0/+3
| | | | | | | | add support for Zephyr Engineering ZPC.1900 board * Patch by Anders Larsen, 23 Sep 2003: add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only implemented for the x86 architecture)
* * Patch by Sangmoon Kim, 23 Sep 2003:wdenk2003-10-08-2/+22
| | | | | | | | | | | | | | | | | | | | fix pll_pci_to_mem_multiplier table for MPC8245 * Patch by Anders Larsen, 22 Sep 2003: enable timed autoboot on PXA * Patch by David Müller, 22 Sep 2003: - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver returns correct libgcc file path - "latency" reduction of busy-loop waiting to improve "U-Boot" boot time on s3c24x0 systems * Patch by Jon Diekema, 19 Sep 2003: - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet link state to the fault LED. - In NetLoop, make the Fault LED reflect the link status. The link status gets updated on entry, and on timeouts.
* * Patch by Anders Larsen, 18 Sep 2003:wdenk2003-10-08-2/+2
| | | | | | | | | | | allow mkimage to build and run on Cygwin-hosted systems * Patch by Frank Müller, 18 Sep 2003: use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in cpu/mpc8xx/fec.c * Patch by Pantelis Antoniou, 16 Sep 2003: add tool to compute fileds in the PLPRCR register for MPC86x
* Fix problems with I2C support for mpc5200dzu2003-09-30-3/+57
|
* * Adapt TRAB configuration and auto_update to new memory layoutdzu2003-09-29-10/+75
|
* Add support for the Sharp LQ065T9DR51U LCD displaydzu2003-09-25-0/+12
|
* * Patch by Rune Torgersen, 17 Sep 2003:wdenk2003-09-18-7/+33
| | | | | - Fixes for MPC8266 default config - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
* * Patches by Anders Larsen, 17 Sep 2003:wdenk2003-09-18-12/+32
| | | | | | | | | | - fix spelling errors - set GD_FLG_DEVINIT flag only after device function pointers are valid - Allow CFG_ALT_MEMTEST on systems where address zero isn't writeable - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs - trigger watchdog while waiting in serial driver
* Support new configuration of TRAB board with more memorywdenk2003-09-17-22/+1
| | | | Minor cleanup of comments
* Add auto-update code for TRAB board using USB memory stickswdenk2003-09-17-1/+1
|
* * Fix timeout problems with 1st packet on MPC5200wdenk2003-09-16-4/+8
|
* Disable MPC5200 bus pipelining as workaround for bus contentionwdenk2003-09-16-0/+2
|
* * Modify XLB arbiter priorities on MPC5200 so all devices use samewdenk2003-09-16-0/+5
| | | | | priority; configure critical interrupts to be handled like external interrupts
* Make IPB clock on MGT5100/MPC5200 configurable in board config file;wdenk2003-09-16-0/+2
| | | | go back to 66 MHz for stability
* * Patch by Gleb Natapov, 14 Sep 2003:wdenk2003-09-14-8/+27
| | | | | | | | | | enable watchdog support for all MPC824x boards that have a watchdog * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the "Non-octet Aligned Frame" errors we see at 100 Mbps * Patch by Sharad Gupta, 14 Sep 2003: fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
* * Patch by David Müller, 13 Sep 2003:wdenk2003-09-13-1/+339
| | | | | | various changes to VCMA9 board specific files * Add I2C support for MGT5100 / MPC5200
* PPC405EP: set vendor id.stroese2003-09-12-0/+4
|
* Disable memory controller before setting first values.stroese2003-09-12-0/+5
|
* * Patch by Gary Jennejohn, 11 Sep 2003:wdenk2003-09-11-1/+8
| | | | | | | | | | | - allow for longer timeouts for USB mass storage devices * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. * Change output format for NAND flash - make it look like for other memory, too
* * Patches by Denis Peter, 9 Sep 2003:wdenk2003-09-10-1994/+330
| | | | | | | | | | | | | | | | | | | | | | | | | | | | add FAT support for IDE, SCSI and USB * Patches by Gleb Natapov, 2 Sep 2003: - cleanup of POST code for unsupported architectures - MPC824x locks way0 of data cache for use as initial RAM; this patch unlocks it after relocation to RAM and invalidates the locked entries. * Patch by Gleb Natapov, 30 Aug 2003: new I2C driver for mpc107 bridge. Now works from flash. * Patch by Dave Ellis, 11 Aug 2003: - JFFS2: fix typo in common/cmd_jffs2.c - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option - JFFS2: remove node version 0 warning - JFFS2: accept JFFS2 PADDING nodes - SXNI855T: add AM29LV800 support - SXNI855T: move environment from EEPROM to flash - SXNI855T: boot from JFFS2 in NOR or NAND flash * Patch by Bill Hargen, 11 Aug 2003: fixes for I2C on MPC8240 - fix i2c_write routine - fix iprobe command - eliminates use of global variables, plus dead code, cleanup.
* * Add support for USB Mass Storage Devices (BBB)wdenk2003-09-10-8/+1981
| | | | | | (tested with USB memory sticks only) * Avoid flicker on TRAB's VFD
* * Add support for SK98xx driverwdenk2003-09-05-10/+11
| | | | | | | | | | | | | | | * Add PCI support for SL8245 board * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) or 1 x AM29LV652 (two LV065 in one chip = 16 MB); Run IPB at 133 Mhz; adjust the MII clock frequency accordingly * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) to allow for more accurate baudrate settings (error now 0.7% at 115 kbps, instead of 3.5% before) * Patch by Andreas Mohr, 4 Sep 2003: Fix a lot of spelling errors
* Adjustments / cleanup for PPChameleon EVB boardwdenk2003-09-03-60/+50
|
generated by cgit v1.1 at 2024-12-27 18:43:12 +0000