summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* ENGR00287268 mx6: fix the secure boot issue on the new tapout chipJason Liu2013-11-13-7/+56
| | | | | | | | | | The new TO(i.MX6Q TO1.5 and i.MX6DL TO1.2) of ROM change the HAB API table address, thus the secure boot can't boot up on the new TO. This patch fix this issue by fix up the HAB API table address according to the TO revision. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00268063 imx6x android: Fix build errorLin Fuzhen2013-06-21-0/+3
| | | | | | Fix build error when build Android Signed-off-by: Lin Fuzhen <fuzhen.lin@freescale.com>
* ENGR00266869-1 imx6x sarebsd: Fix recovery fail issue on SDLin Fuzhen2013-06-19-1/+1
| | | | | | | Correct the recovery environment setting when boot from SD card on sabresd board Signed-off-by: Lin Fuzhen <fuzhen.lin@freescale.com>
* ENGR00266247 Do not limit HAB code for closed systems onlyMahesh Mahadevan2013-06-07-33/+31
| | | | | | | | | | 1. It is very useful to print the HAB event details when the system is not closed to help debug issues before blowing the fuse to secure the system. 2. Also need to authenticate a signed uImage in a open system to help debug issues. Signed-off-by: Mahesh Mahadevan <Mahesh.Mahadevan@freescale.com>
* ENGR00260356: i.MX6SL: uboot: reset can NOT work on TO1.2Anson Huang2013-04-25-0/+3
| | | | | | | | | Boot ROM fix the "glitchless mux" issue on TO1.2 which will mask MMDC_CH0_MASK in CCM_CCDR, it will cause different behavior of reset, need to clear this MMDC_CHx_MASK field to make sure all the i.MX6 series SOCs have same behavior of reset. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00258651 mx6: update thermal equation for i.MX6slAnson Huang2013-04-16-2/+2
| | | | | | | New thermal equation is working for all i.MX6 series SOCs, so update it for i.MX6SL as well. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00256543 mx6: Update equation for thermal sensor on i.MX6DLAnson Huang2013-03-29-1/+1
| | | | | | | Use universal equation and 25C's calibration data to get thermal sensor's ratio on i.MX6DL. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00255481 mx6: Update equation for thermal sensorAnson Huang2013-03-27-1/+22
| | | | | | | Use universal equation and 25C's calibration data to get thermal sensor's ratio. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00243038: make get_mmc_env_devno to be a generic functionJason Liu2013-02-04-1/+11
| | | | | | | | | | | | | Currently, each board has one same function called get_mmc_env_devno, this will make the code a little bit duplication. We can make the get_mmc_env_devno to be a generic function, thus we can remove all the scattered function definition in each board file. And the patch also remove the boot check. Firstly, this check is needless, secondly, this will break the second boot support,for example: first boot from SPI, then switch to SD/MMC boot. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00238048: Add support for processor serial ATAG in uboot for iMX53Nitin Garg2012-12-21-0/+28
| | | | | | | Add support for Processor UID ATAG in uboot for iMX53. The UID is present in Fuses bank 0 at offset 0x20. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00235821 mx6: correct work flow of PFDsAnson Huang2012-12-13-0/+31
| | | | | | | | | | PFDs need to be gate/ungate after PLL lock to reset PFDs to right state. Otherwise PFDs may lose correct state in state-machine, then no output clock. For i.MX6DL and i.MX6SL, ROM have taken care of PFD396 already since the bus clock needs it. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00236620: Add Android fastboot and recovery reboot supportNitin Garg2012-12-11-2/+38
| | | | | | | Add support for Android fastboot and recovery reboot commands for iMX5. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing2012-12-11-4/+5
| | | | | | | | | | | | | | | | | After using POR reset, the content in SRC will be reset. See RM: 63.5.1.2.3 IPP_RESET_B(POR) Because POR reset will reset most of register in IC, so use SNVS_LP General Purpose Register (LPGPR) to store the boot mode value. Below copy from SNVS_BlockGuide.pdf: The SNVS_LP General Purpose Register provides a 32 bit read write register, which can be used by any application for retaining 32 bit data during a power-down mode This Patch will use [7,8] bits of this register. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00236337: mx6/clock: emi_slow clock rate is not printed out correctlyJason Liu2012-12-10-1/+1
| | | | | | | This issue due to PODF is not used correcly, need use the following instead: ACLK_EMI_SLOW_PODF_OFFSET, the original used ACLK_EMI_PODF_OFFSET was wrong. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.Zhang Xiaodong2012-11-28-0/+7
| | | | | | Add HDMIdongle board for imx6Q/DL under board/freescale. Signed-off-by: Zhang Xiaodong <B39117@freescale.com>
* ENGR00233366-5 Anatop PFUZE: move LDO bypass code to kernelRobin Gong2012-11-19-0/+3
| | | | | | | move LDO bypass code and one PFUZE1.0 workaround code to kernel. Remove CONFIG_MX6_INTER_LDO_BYPASS in u-boot Signed-off-by: Robin Gong <b38343@freescale.com>
* ENGR00233307 Need secure/encrypted boot for Widevine support.Dan Douglass2012-11-12-3/+46
| | | | | | | | | | | | | | | | | | | | * Adding the config option CONFIG_SECURE_BOOT to the SabreSD board, but defaulting it to be disabled. Removed the CONFIG_SECURE_BOOT key from mx6q_arm2_android.h so that it is only in one file, include/configs/mx6q_arm2.h * Fixed up an address alignment check in authenticate_image(). The test would fail in the event the address is already aligned. Also, added some debug code which can be enabled to assist in testing secure images. * Added support for authenticating an image when using booti. * Adding support for secure boot to the Sabre SD board. * Added support for encrypted boot to mx6q arm2 board linker script. Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
* ENGR00231553: MX6SL: Uncovered an issue for I2C parent clockTerry Lv2012-10-30-2/+7
| | | | | | We need to check reg bit to decide I2C parent clock. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00229614 mx6: disable VDDPU by default, xpu will enable it if needed.Anson Huang2012-10-16-1/+13
| | | | | | | Disable VDDPU_CAP by default, xPU will enable it in driver when they need it. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00223797-2 MX6Q/DL CPU:Do not disable IPU display channelLiu Ying2012-09-27-2/+4
| | | | | | | | | This patch changes to keep IPU display channel being running rather than disable IPU display channel when we leave uboot stage and go to kernel stage. This may support smooth tranistion from Uboot splash screen to kernel stage. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
* ENGR00223236-1 [MX6]Change the temperature range to -40C ~ 125CAnson Huang2012-09-06-6/+7
| | | | | | | | | Previous temperature range is -25C ~ 125C, according to latest datasheet, change it to -40C to 125C. Fix temperature report error when it is < 0C. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing2012-08-31-0/+12
| | | | | | | | add cpu serial number tag, kernel will read this number and put it in /proc/cpuinfo, as 'Serial' part it can be used as a UUID source in software. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun2012-08-01-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original secure boot implementation make a consumption that u-boot.bin will not exceed 0x2F000. With this consumption, the hab data is hard coded in linker script file to relative address 0x2F000 without causing any problem. But when this consumption don't hold, the hard coded way will cause memory region overlap and break build. So we need to change to a dynamic way of allocating hab_data. The new implementation put hab data at the next 0x1000 alignment after u-boot data and text section, instead of hard coded to 0x2F000. Similar changes is made to uImage authentication implementation. Changes in U-Boot includes: - in u-boot.lds file, change "__hab_data" to dynamic align to 0x1000 - change authenticate_image implementation, originally the uImage parameters are hard coded, now they are retrived from the "load_addr" and the image_hdr The new secure image layout: U-Boot +-------------------+ DDR_START | | | U-Boot Image | | | +-------------------+ DDR_START + UBOOT_SIZE | PADDING | +-------------------+ align to 0x1000 | CSF Data | - +-------------------+ +-- CSF + Pad, Size : 0x2000 | PADDING | - +-------------------+ uImage +-------------------+ DDR_START | | | uImage | | | +-------------------+ DDR_START + UIMAGE_SIZE | PADDING | +-------------------+ align to 0x1000 | IVT | ---- Size : 0x20 +-------------------+ | CSF Data | - +-------------------+ +-- CSF + Pad, Size : 0x2000 | PADDING | - +-------------------+ Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00217401 common: fix build warningXinyu Chen2012-07-26-1/+1
| | | | | | | | | Fix the build warning in uboot build. Fix bug of incorrect dereference to periph2 clock pre divider. Fix incorrect type of maxpackage size assign, even it's not used at all in fastboot. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun2012-07-13-0/+177
| | | | | | | | Move the secure boot related implementation code from mx6q_arm2.c to mx6/generic.c. In this way the HAB feature can be shared by all MX6 platforms Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00211038 Fix the PAD_LVE implementationMahesh Mahadevan2012-05-30-1/+1
| | | | | | Fix the PAD_LVE implementation used on MX6SL. Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@freescale.com>
* ENGR00210918-2 cleanup android support, build pass all boardsZhang Jiejing2012-05-29-3/+190
| | | | | | | | | | - move recovery.h to common inlcude place. - move supported_reco_envs to soc related, not board related, - user can change this via configure header, don't needs this in every board file. - pass build for all mx5/mx6 android configs. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00209899-2 MX6Q: cleanup: cleanup fastboot, udc warnning.Zhang Jiejing2012-05-21-3/+7
| | | | | | cleanup android fastboot and udc build warnnings. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00210014 i.mx6 : i.mx6sl : add PAD_CTL_LVE support for pad configurationEric Sun2012-05-18-2/+8
| | | | | | | | | | | Original pad configuration don't provide enough bitfield width to hold all necessary information. For MX6Sololite, a "PAD_CTL_LVE" is needed to be configed for many pins. iomux_v3_cfg_t is re-orgnized to address this issue. PAD_CTRL is extended by 1 bit to hold the "PAD_CTL_LVE". Which is mapped to proper bit location when configure the PAD config register. Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
* ENGR00209059 android: refine fastboot and recovery support.imx-android-r13.3Zhang Jiejing2012-05-14-0/+44
| | | | | | | | | | 1. add check asrc register to enter recovery mode, rather then check the file. 2. fix the boot.img can not fastboot flash function. 3. consolidate and cleanup fastboot code. 4. clean up many build warnning message. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00181337-1 i.mx6 : add initial support for i.mx6slEric Sun2012-05-02-9/+95
| | | | | | | | | | | | | | This patch is to add the initial support for Freescale i.mx6sl chip. i.mx6sl is the SoloLite verison of Freescale i.mx6 family. The patch does: - memory layout support, - iomux support, - clock support, Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ryan QIAN <b32804@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00180623 fastboot: add fastboot in MX6Q_SABERSD boardsZhang Jiejing2012-04-24-1/+1
| | | | | | | | add fastboot function back in MX6Q_SABERSD board. the MX6DL_SABERSD have usb init related issue which will keep RESET, but left as later developement. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00179762: i.MX6: print the SOC revision correctlyJason Liu2012-04-18-1/+1
| | | | | | | | | | For example: The soc rev on i.mx6dl rev 1.0 not print correctly: CPU: Freescale i.MX 6 family 0.0V at 792 MHz This patch help u-boot print out the SOC revision correctly: CPU: Freescale i.MX6 family TO1.0 at 792 MHz Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00174625: Remove build warnings for mx6qTerry Lv2012-02-17-2/+8
| | | | | | Remove build warnings for mx6q. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00174104-1: Add conditional CONFIG to fix build breakTerry Lv2012-02-13-2/+6
| | | | | | | | | | | Add CONFIG_MXC_FEC macro to fec init code. Add CONFIG_VIDEO_MX5 to ipu init code. Change temperature function as static. For in iram boot, FEC configs is not needed, those FEC init code will cause build errors. These changes can reduce image size. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00171771 [MX6]Need to power down PCIe by defaultAnson Huang2012-01-12-1/+7
| | | | | | | PCIe is power on by defaultt, we need to power down it in u-boot, it can save more than 1mW during suspend. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00171091 [MX6]Remove workaround for reset issueAnson Huang2011-12-30-25/+0
| | | | | | | The root cause is the L1 I-cache need invalidation, now we don't need this workaround, so remove it. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie2011-12-28-0/+2
| | | | | | Disable the uboot workaround. It will crash the MFGTOOL. Signed-off-by: Huang Shijie <b32955@freescale.com>
* ENGR00170837 [MX6]Add temperatuer check into ubootAnson Huang2011-12-22-0/+103
| | | | | | | | | We need to check CPU temperature in uboot, if cpu is too hot, we will let it waiting there until cpu temperature drop to save region, then go on boot up. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00162642: Fix bug in setting VDDSOC voltageRanjani Vaidyanathan2011-12-20-2/+2
| | | | | | Fix incorrect VDDSOC voltage setting in uboot. Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
* ENGR00160621 [MX6]Workaround for reset issueAnson Huang2011-12-20-0/+25
| | | | | | | | | | | | | | | | | | | Add workaround for POR/wdog reset issue, we need to do a CORE LDO reset everytime POR/wdog reset, otherwise kernel will crash or hang when we booting more than 2 cores. Root cause is still under investigation, it is analog/power related issue, may take long time to identify the root cause, we need to add workaround to make function ready first. The flow of workaround is as below: 1. Check CORE LDO reset flag, currently stored in SNVS_LPGPR[0]; 2. If it is there, clear it, go on boot up system; If not, Set the flag, configure wdog to timeout in 0.5 seconds, then disable CORE LDO and wait for wdog timeout; This workaround will bring 0.5~1 seconds delay of booting. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00170299-1 Android: add support fastboot functionZhang Jiejing2011-12-15-1/+71
| | | | | | add support for otg in MX6Q uboot to enable fastboot function. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00163513 MX6Q-UBOOT : Add download_mode cmdEric Sun2011-11-30-0/+50
| | | | | | | | | | | | | Add "download_mode" command to U-Boot. It will force a system reset and let boot running in "boot from serial rom" mode, which can be used by manufacturing tool. The command will triggle a write to SRC_GPR9 and SRC_GPR10, then triggle a watchdog reset. GPR9 and GPR10 can maintain their value during the reset, the value in it make ROM to start in "boot from serial rom" mode. After that GPR9 and GPR10 are written by their original value for normal boot. Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00162938 MX5: Add download_mode command in uboot to enter MFG download mode.Zhang Jiejing2011-11-23-0/+39
| | | | | | | | | | | | Add download_mode command in uboot to enter MFG dowload mode , you can try download mode command in uboot and enter download mode. it first set srtc register, then before enter linux, it will clear these register to prevent the up comming watchdog reset will enter mfgtool mode. only add mx53 now. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00162874: Add enet clk change support for mx6Terry Lv2011-11-23-7/+75
| | | | | | Add enet clk change support for mx6. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00162570: MX6-Increase VDDSOC_CAP voltage to 1.2VRanjani Vaidyanathan2011-11-17-0/+7
| | | | | | | | Set the VDDSOC LDO to increase the VDDSOC cap to 1.2V. This is required for correct functioning of GPU and when the ARM LDO is set to 1.225V (when ARM core is at 1GHz). Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
* ENGR00161373 Move the MAC address read from fuse code to MX6 SoC fileMahesh Mahadevan2011-11-03-2/+21
| | | | | | | Move the code to read the mac address from the fuse to SoC file and out of the board file Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
* ENGR00161254 MX6Q: Add NAND support in UbootAllen Xu2011-11-03-1/+3
| | | | | | | | Add iomux and clock setting in Uboot code to support NAND, due to the conflict between NAND and SD, NAND function is not enabled in default configuration. Signed-off-by: Allen Xu <allen.xu@freescale.com>
* ENGR00139215 iMX61 Uboot support blow fuseRyan QIAN2011-11-02-0/+24
| | | | | | | | 1. add force option to blow operation 2. add blown value check 3. add simple validation for zeros returned by 'simple_strtoul' call Signed-off-by: Ryan QIAN <b32804@freescale.com>
* ENGR00139254: Enable MX6Q Uboot Splash ScreenSandor Yu2011-09-02-0/+7
| | | | | | | | | | | | | | Only support LVDS0 splash screen. Enable splash process: 1.define CONFIG_SPLASH_SCREEN in mx6q_sabreauto.h 2.Config U-boot with followed command:() setenv splashimage '0x30000000' #Set splash position as Center setenv splashpos 'm,m' #Set LVDS via LVDS bridge 0 setenv lvds_num 0 Signed-off-by: Sandor Yu <r01008@freescale.com>
generated by cgit v1.1 at 2024-11-24 04:43:39 +0000