summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Expand)AuthorAgeLines
* ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie2011-12-28-0/+2
* ENGR00170837 [MX6]Add temperatuer check into ubootAnson Huang2011-12-22-0/+103
* ENGR00162642: Fix bug in setting VDDSOC voltageRanjani Vaidyanathan2011-12-20-2/+2
* ENGR00160621 [MX6]Workaround for reset issueAnson Huang2011-12-20-0/+25
* ENGR00170299-1 Android: add support fastboot functionZhang Jiejing2011-12-15-1/+71
* ENGR00163513 MX6Q-UBOOT : Add download_mode cmdEric Sun2011-11-30-0/+50
* ENGR00162938 MX5: Add download_mode command in uboot to enter MFG download mode.Zhang Jiejing2011-11-23-0/+39
* ENGR00162874: Add enet clk change support for mx6Terry Lv2011-11-23-7/+75
* ENGR00162570: MX6-Increase VDDSOC_CAP voltage to 1.2VRanjani Vaidyanathan2011-11-17-0/+7
* ENGR00161373 Move the MAC address read from fuse code to MX6 SoC fileMahesh Mahadevan2011-11-03-2/+21
* ENGR00161254 MX6Q: Add NAND support in UbootAllen Xu2011-11-03-1/+3
* ENGR00139215 iMX61 Uboot support blow fuseRyan QIAN2011-11-02-0/+24
* ENGR00139254: Enable MX6Q Uboot Splash ScreenSandor Yu2011-09-02-0/+7
* ENGR00155283: Set dpgdck0_2_en to 0 when freq is lower than 300MHzTerry Lv2011-09-01-2/+4
* ENGR00155156 [MX6]Clean up debug info in ubootAnson Huang2011-08-22-23/+0
* ENGR00151310 mx53 smd: force warm reset as cold resetLily Zhang2011-07-22-15/+0
* ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang2011-06-24-0/+1662
* ENGR00143298: Reinit uart after using clk commandTerry Lv2011-05-20-0/+6
* ENGR00143469 mx53 smd: pull down GPIO_9 to reset the boardLily Zhang2011-05-16-0/+15
* ENGR00141885: mx50 and mx53 reboot fail when booting from spi norTerry Lv2011-04-20-2/+15
* ENGR00141335-2: get more accurate ipg_per clock frequencyTerry Lv2011-04-11-17/+24
* ENGR00141556: Fix copyright issueTerry Lv2011-04-08-2/+4
* ENGR00140824 Android: Enable fastboot support for mx50 rdpSammy He2011-03-21-3/+62
* ENGR00140767: Improve mx5x DDR clock functionTerry2011-03-17-47/+41
* ENGR00138468-1 MX5 video:Disable DP/DC/DI/IDMAC before go to kernelLiu Ying2011-01-25-0/+8
* ENGR00137894-2 MX53: Add ipu base addr and ipu clockLiu Ying2011-01-13-0/+43
* ENGR00137604: Change PLL4 to 455MHz for mx53Terry Lv2011-01-07-1/+4
* ENGR00137372 MX53: Switch back to use DCD and update DDR scriptsLily Zhang2010-12-28-2/+7
* ENGR00134068 MX51 BBG:Support CLAA WVGA splashimageLiu Ying2010-12-16-0/+43
* ENGR00133727: uart outputs messy code when kernel starts on mx51Terry Lv2010-12-14-0/+69
* ENGR00134098-2 MX53: Add fastboot support for android.Sammy He2010-11-26-0/+51
* ENGR00134098-1 MX51: Update fastboot usb init seqSammy He2010-11-26-6/+8
* ENGR00133551-1 Add freescale usb udc support for i.mx51 platform.Sammy He2010-11-18-0/+52
* ENGR00132909 MX53 Uboot: Support for TO2Anish Trivedi2010-11-15-7/+2
* ENGR00133049 Support nand flash for MX28Frank Li2010-11-04-1/+43
* ENGR00132759 MX53: use 32K CLK as GPT sourceLily Zhang2010-10-19-38/+33
* ENGR00132758 correct NFC_CLK definitionLily Zhang2010-10-19-1/+4
* ENGR00132709 MX53: add "clk nfc" command supportLily Zhang2010-10-18-0/+27
* ENGR00132617 MX53: add NAND supportLily Zhang2010-10-17-3/+4
* ENGR00131779: Use serial_mxc as uart driver for all platformsTerry Lv2010-09-21-675/+18
* ENGR00127167: Add gpmi nfc and apbh dma support for mx50.Terry Lv2010-09-19-228/+161
* ENGR00126079: Add clk command support for mx51Terry Lv2010-08-11-6/+657
* ENGR00125237: Fix incorrect copyright info.Terry Lv2010-08-04-11/+20
* ENGR00123924: Reconstructure fuse files and add fuse to mx53.Terry Lv2010-07-16-455/+0
* ENGR00124359 Add uboot support for MX50Jason Liu2010-07-07-0/+2286
* ENGR00122651: Add dwc_ahsata supportTerry Lv2010-06-24-0/+2
* ENGR00123484 mx28:support saving environment into sd1Aisheng.Dong2010-06-08-15/+0
* ENGR00123870 MX53: Set AXI_B clock to 200MhzJason Liu2010-05-26-7/+3
* ENGR00123630 Set ddr clk clock according to the board IDrel_imx_2.6.31_10.05.02imx_v2009.08_10.05.02Jason Liu2010-05-19-22/+7
* ENGR00123418: Add peripheral clock setup supportTerry Lv2010-05-14-66/+283