summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* fsl-ddr: use the 1T timing as default configurationDave Liu2009-01-23-1/+1
| | | | | | | | | For light loaded system, we use the 1T timing to gain better memory performance, but for some heavily loaded system, you have to add the 2T timing options to board files. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: make the self refresh idle threshold configurableDave Liu2009-01-23-4/+8
| | | | | | | | | | | | | Some 85xx processors have the advanced power management feature, such as wake up ARP, that needs enable the automatic self refresh. If the DDR controller pass the SR_IT (self refresh idle threshold) idle cycles, it will automatically enter self refresh. However, anytime one transaction is issued to the DDR controller, it will reset the counter and exit self refresh state. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: clean up the ddr code for DDR3 controllerDave Liu2009-01-23-11/+13
| | | | | | | | - The DDR3 controller is expanding the bits for timing config - Add the DDR3 32-bit bus mode support Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: update the bit mask for DDR3 controllerDave Liu2009-01-23-4/+8
| | | | | | | | According to the latest 8572 UM, the DDR3 controller is expanding the bit mask, and we use the extend ACTTOPRE mode when tRAS more than 19 MCLK. Signed-off-by: Dave Liu <daveliu@freescale.com>
* 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boardsKumar Gala2009-01-23-4/+12
| | | | | | | Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead of _IO_BASE so we are more explicit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boardsKumar Gala2009-01-23-4/+12
| | | | | | | | Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead of _MEM_BASE so we are more explicit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* microblaze: Use cache functions (especially cache status)Michal Simek2009-01-23-3/+0
| | | | in systems which are configured without flash
* sh: Fix up rsk7203 target for out of tree buildKieran Bingham2009-01-16-8/+13
| | | | | | | Fix up rsk7203 target to build successfully using out-of-tree build. Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* cpu/mpc824x/Makefile: fix warning with parallel buildsWolfgang Denk2009-01-14-1/+1
| | | | | | | | | | Parallel builds would occasionally issue this build warning: ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists Use "ln -sf" as quick work around for the issue. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-01-14-1/+5
|\
| * Change DDR tlb start entry to CONFIG param for 85xxHaiying Wang2009-01-13-1/+5
| | | | | | | | | | | | | | So that we can locate the DDR tlb start entry to the value other than 8. By default, it is still 8. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* | MPC86xx: fix build warningsWolfgang Denk2009-01-12-3/+1
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* at91rm9200: move define from lowlevel_init to headerJean-Christophe PLAGNIOL-VILLARD2009-01-06-48/+22
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91rm9200: rename lowlevel init value to CONFIG_SYS_Jean-Christophe PLAGNIOL-VILLARD2009-01-06-44/+44
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* mpc8[56]xx: Put localbus clock in sysinfo and gdTrent Piepho2008-12-19-44/+55
| | | | | | | | | | | | | | | | | | | | | | | Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* mpc86xx: Double local bus clock dividerTrent Piepho2008-12-19-0/+1
| | | | | | | | The local bus clock divider should be doubled for both 8610 and 8641. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* mpc8568: Double local bus clock dividerTrent Piepho2008-12-19-2/+2
| | | | | | | | | | | | | The clock divider for the MPC8568 local bus should be doubled, like the other newer MPC85xx chips. Since there are now more chips with a 2x divider than a 1x, and any new 85xx chips will probably be 2x, invert the sense of the #if so that it lists the 1x chips instead of the 2x ones. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Fix the boot window issueDave Liu2008-12-19-8/+8
| | | | | | | | | | | | | | | | | | | | | | If one custom board is using the 8MB flash, it is set as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000. The current start.S code will be broken at switch_as. It is because the TLB1[15] is set as 16MB page size, EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000. For the 8MB flash case, the EPN = 0xefxxxxxx, RPN = 0xffxxxxxx. Assume the virt address of switch_as is 0xef7ff18c, the real address of the instruction at switch_as should be 0xff7ff18c. the 0xff7ff18c is out of the range of the default 8MB boot LAW window 0xff800000 - 0xffffffff. So when we switch to AS1 address space at switch_as, the core can't fetch the instruction at switch_as any more. It will cause broken issue. Signed-off-by: Dave Liu <daveliu@freescale.com>
* Set IVPR to kenrel entry point in second core boot pageHaiying Wang2008-12-19-0/+1
| | | | | | | | | | | Assuming the OSes exception vectors start from the base of kernel address, and the kernel physical starting address can be relocated to an non-zero address. This patch enables the second core to have a valid IVPR for debugger before kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid value for second core which runs kernel at different physical address other than 0x0. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* mpc8xxx: LCRR[CLKDIV] is sometimes five bitsTrent Piepho2008-12-19-2/+2
| | | | | | | | | | | | | | On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits instead of four. In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It should be safe as the fifth bit was defined as reserved and set to 0. Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* mpc8[56]xx: Put localbus clock in device treeTrent Piepho2008-12-19-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Export the localbus frequency in the device tree, the same way the CPU, TB, CCB, and various other frequencies are exported in their respective device tree nodes. Some localbus devices need this information to be programed correctly, so it makes sense to export it along with the other frequencies. Unfortunately, when someone wrote the localbus dts bindings, they didn't bother to define what the "compatible" property should be. So it seems no one was quite sure what to put in their dts files. Based on current existing dts files in the kernel source, I've used "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all of the 85xx devices, and are looked for by the Linux code. The eLBC is apparently not entirely backward compatible with the pq3 LBC and so eLBC equipped platforms like 8572 won't use pq3-localbus. For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems and is also looked for by the Linux code. On MPC8641, I've also used "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of which don't use "fsl,elbc" or any other acceptable name to match on. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Add support to populate addr map based on TLB settingsKumar Gala2008-12-19-0/+34
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Coding style cleanup, update CHANGELOG.Wolfgang Denk2008-12-16-5/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functionsTimur Tabi2008-12-15-194/+0
| | | | | | | | | | All implementations of the functions i2c_reg_read() and i2c_reg_write() are identical. We can save space and simplify the code by converting these functions into inlines and putting them in i2c.h. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix new found CFG_Jean-Christophe PLAGNIOL-VILLARD2008-12-14-2/+2
| | | | | | | Also fix some minor typos. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Remove compiler warning: target CPU does not support interworkingSergei Poselenov2008-12-13-0/+10
| | | | | | | This warning is issued by modern ARM-EABI GCC on non-thumb targets. Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2008-12-13-7/+25
|\
| * MIPS: Flush data cache upon relocationStefan Roese2008-12-10-7/+21
| | | | | | | | | | | | | | | | | | This patch now adds a flush to the data cache upon relocation. The current implementation is missing this. Only a comment states that it should be done. So let's really do it now. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
| * MIPS: Add CONFIG_SKIP_LOWLEVEL_INITStefan Roese2008-12-10-0/+4
| | | | | | | | | | | | | | | | | | | | | | This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This enables support for boards where the lowlevel initialization is already done when U-Boot runs (e.g. via OnChip ROM). This will be used in the upcoming VCTH board support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* | sh: Update sh timer functionNobuhiro Iwamatsu2008-12-10-315/+3
|/ | | | | | | Change to write/readX function and fix timer problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Fix compile error in building MBX860T.Ben Warren2008-12-10-1/+1
| | | | Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Fixed path to sc520 SSI include fileGraeme Russ2008-12-10-1/+1
| | | | Signed Off By: Graeme Russ <graeme.russ@gmail.com>
* video: fix FADS823 and RRvision compiling issuesAnatolij Gustschin2008-12-09-2/+0
| | | | | | | | Since commit 561858ee building for FADS823 and RRvision doesn't work. Let's include version.h and timestamp.h unconditionally to fix the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk2008-12-09-2/+1
|\
| * Remove redundant armv4 flag from arm926ejs compile flagsRemy Bohmer2008-12-06-2/+1
| | | | | | | | | | | | | | Currently the arm926ejs tree has the armv4 option set during compilation. This flag does not belong here because a arm926 CPU is always a armv5 CPU. Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | Section name should be ".data", not "data"Trent Piepho2008-12-09-5/+4
| | | | | | | | | | Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Update U-Boot's build timestamp on every compilePeter Tyser2008-12-06-23/+49
|/ | | | | | | Use the GNU 'date' command to auto-generate a new U-Boot timestamp on every compile. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk2008-12-05-2/+2
|\
| * AT91: remove non supported board AT91RM9200DF macroJean-Christophe PLAGNIOL-VILLARD2008-12-02-2/+2
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | 85xx: init gd as early as possibleKumar Gala2008-12-04-6/+6
| | | | | | | | | | | | | | | | Moved up the initialization of GD so C code like set_tlb() can use gd->flags to determine if we've relocated or not in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* | 85xx: Fix relocation of CCSRBARKumar Gala2008-12-04-4/+5
| | | | | | | | | | | | | | | | | | | | If the virtual address for CCSRBAR is the same after relocation but the physical address is changing we'd end up having two TLB entries with the same VA. Instead we new us the new CCSRBAR virt address + 4k as a temp virt address to access the old CCSRBAR to relocate it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* | 85xx: Add PORDEVSR_PCI1 definePeter Tyser2008-12-04-1/+1
| | | | | | | | | | | | | | | | | | Add define used to determine if PCI1 interface is in PCI or PCIX mode. Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | fsl ddr skip interleaving if not supported.Ed Swarthout2008-12-03-12/+17
| | | | | | | | | | | | | | | | | | Removed while(1) hang if memctl_intlv_ctl is set wrong. Remove embedded tabs from strings. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* | 85xx: Add CPU 2 errata workaround to all 8548 boardsPeter Tyser2008-12-03-0/+13
|/ | | | | | | | | | | All mpc8548-based boards should implement the suggested workaround to CPU 2 errata. Without the workaround, its possible for the 8548's core to hang while executing a msync or mbar 0 instruction and a snoopable transaction from an I/O master tagged to make quick forward progress is present. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2008-11-25-26/+44
|\
| * ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initializationDave Mitchell2008-11-21-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expanded OCM TLB to allow access to 64K OCM as well as 256K of internal SRAM. Adjusted internal SRAM initialization to match updated user manual recommendation. OCM & ISRAM are now mapped as follows: physical virtual size ISRAM 0x4_0000_0000 0xE300_0000 256k OCM 0x4_0004_0000 0xE304_0000 64k A single TLB was used for this mapping. Signed-off-by: Dave Mitchell <dmitch71@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRsDave Mitchell2008-11-21-20/+21
| | | | | | | | | | | | | | | | | | | | | | Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and L2 cache DCRs from ppc440.h to this new header. Also converted these DCR defines from lowercase to uppercase and modified referencing modules to use them. Signed-off-by: Dave Mitchell <dmitch71@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Clear all potentially pending exceptions in MCSRStefan Roese2008-11-20-0/+4
| | | | | | | | | | | | | | | | This is needed on Canyonlands which still has an exception pending while running relocate_code(). This leads to a failure after trap_init() is moved to the top of board_init_r(). Signed-off-by: Stefan Roese <sr@denx.de>
* | AT91RM9200DK: fix broken boot from NOR flashWolfgang Denk2008-11-24-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | at91rm9200: fix broken boot from nor flashJens Scharsig2008-11-24-4/+1
| | | | | | | | | | | | | | This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if CONFIG_AT91RM9200 is defined and nor preloader is used. Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
generated by cgit v1.1 at 2024-11-30 21:01:28 +0000