summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* Fixes bug clearing the bss section for i386mushtaq khan2007-05-15-1/+1
| | | | | | | | | | | | | Hi, There is a bug in the code of clearing the bss section for processor i386.(File: cpu/i386/start.S) In the code, bss_start addr (starting addr of bss section) is put into the register %eax, but the code which clears the bss section refers to the addr pointed by %edi. This patch fixes this bug by putting bss_start into %edi register. Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
* Merge with /home/tur/git/u-boot#motionproWolfgang Denk2007-05-15-0/+11
|\
| * [MPC5xxx] There are networking problems on the Motion-PRO board withBartlomiej Sieka2007-05-07-0/+11
| | | | | | | | | | | | current PHY initalization code (tftp timeouts all the time). This commit temporarily disables PHY initalization sequence to make the networking operational, until a fix is found.
* | 5xxx: write MAC address to mac-address and local-mac-addressTimur Tabi2007-05-05-0/+4
| | | | | | | | | | | | | | | | | | | | Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, ftp_cpu_setup() should write the MAC address to mac-address and local-mac-address, if they exist. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* | [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot messageGrzegorz Wianecki2007-05-05-4/+8
| | | | | | | | | | | | | | | | | | | | MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up message. Use PVR to distinguish between the two variants, and print proper CPU information. Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Coding stylke cleanup; update CHANGELOG.Wolfgang Denk2007-05-05-11/+11
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-05-05-9/+21
|\ \
| * \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-04-29-1113/+1396
| |\ \
| * | | ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.Matthias Fuchs2007-04-24-9/+21
| | | | | | | | | | | | | | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-05-05-75/+95
|\ \ \ \
| * | | | Cleaned up some 85xx PCI bugsAndy Fleming2007-05-02-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Cleaned up the CDS PCI Config Tables and added NULL entries to the end * Fixed PCIe LAWBAR assignemt to use the cpu-relative address * Fixed 85xx PCI code to assign powar region sizes based on the config values (rather than hard-coding them) * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | Add support for the 8568 MDS boardAndy Fleming2007-05-02-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | Reworked 85xx speed detection codeAndy Fleming2007-04-23-36/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed the code to read the registers and calculate the clock rates, rather than using a "switch" statement. Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | Support 1G size on 8548Andy Fleming2007-04-23-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e500v2 and newer cores support 1G page sizes. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | Only set ddrioovcr for 8548 rev1.Andy Fleming2007-04-23-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | Tweak DDR ECC error counterAndy Fleming2007-04-23-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable single-bit error counter when memory was cleared by ddr controller. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | 85xx: write MAC address to mac-address and local-mac-addressTimur Tabi2007-04-23-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, ftp_cpu_setup() should write the MAC address to mac-address and local-mac-address, if they exist. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | | Some 85xx cpu cleanupsAndy Fleming2007-04-23-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Cleaned up the TSR[WIS] clearing * Cleaned up DMA initialization Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
| * | | | Add cpu support for the 8544Andy Fleming2007-04-23-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recognize new SVR values, and add a few register definitions Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
| * | | | u-boot: Fix e500 v2 core reset bugZang Roy-r619112007-04-23-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch fixes the e500 v2 core reset bug. For e500 v2 core, a new reset control register is added to reset the processor. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| * | | | u-boot: v2: Remove the fixed TLB and LAW entrynubmerZang Roy-r619112007-04-23-12/+4
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW entry number to control the loop. This can reduce the potential risk for the 85xx processor increasing its TLB adn LAW entry number. Signed-off-by: Swarthout Edward <swarthout@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* | | | Merge with /home/wd/git/u-boot/custodian/u-boot-nand-flashWolfgang Denk2007-05-05-1/+1
|\ \ \ \
| * | | | Remove BOARDLIBS usage completelyStefan Roese2007-04-23-1/+1
| |/ / / | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Conditionalize 8641 Rev1.0 MCM workaroundsJames Yang2007-05-01-14/+28
| | | | | | | | | | | | | | | | | | | | Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | Rewrote picos_to_clk() to avoid rounding errors.James Yang2007-05-01-8/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clarified that conversion is to DRAM clocks rather than platform clocks. Made function static to spd_sdram.c. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | mpc86xx; Write MAC address to mac-address and local-mac-addressJon Loeliger2007-04-20-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, ftp_cpu_setup() should write the MAC address to mac-address and local-mac-address, if they exist. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | mpc86xx: protect memcpy to bad address if a mac-address is missing from dtJon Loeliger2007-04-20-4/+8
|/ / / | | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | Merge with /home/wd/git/u-boot/custodian/u-boot-fdtWolfgang Denk2007-04-18-53/+135
|\ \ \
| * | | Fix the ft_cpu_setup() property settings.Gerald Van Baren2007-04-15-54/+135
| | | | | | | | | | | | | | | | | | | | | | | | Use "setter" functions instead of flags, cleaner and more flexible. It also fixes the problem noted by Timur Tabi that the ethernet MAC addresses were all being set incorrectly to the same MAC address.
| * | | Merge git://www.denx.de/git/u-boot into fdt-cmdGerald Van Baren2007-04-14-0/+4
| |\ \ \
| * | | | Moved fdt command support code to fdt_support.cGerald Van Baren2007-04-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | ...in preparation for improving the bootm command's handling of fdt blobs. Also cleaned up some coding sloppiness.
* | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-04-18-7/+1
|\ \ \ \ \
| * | | | | Add PIXIS FPGA support for MPC8641HPCN board.Haiying Wang2007-04-09-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the 8641HPCN's PIXIS code to the new directory board/freescale/common/ as it will be shared by future boards not in the same processor family. Write a "pixis_reset" command that utilizes the FPGA reset sequencer to support alternate soft-reset options such as using the "alternate" flash bank, enabling the watch dog, or choosing different CPU frequencies. Add documentation for the pixis_reset to README.mpc8641hpcn. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xxWolfgang Denk2007-04-18-37/+122
|\ \ \ \ \ \
| * \ \ \ \ \ Merge with /home/git/u-bootWolfgang Denk2007-03-08-26/+40
| |\ \ \ \ \ \
| * \ \ \ \ \ \ Merge with /home/git/u-bootWolfgang Denk2007-03-08-4/+27
| |\ \ \ \ \ \ \
| * | | | | | | | Some code cleanup.Wolfgang Denk2007-03-04-43/+43
| | | | | | | | |
| * | | | | | | | Merge with http://opensource.freescale.com/pub/scm/u-boot-7448hpc2.gitWolfgang Denk2007-03-04-9/+94
| |\ \ \ \ \ \ \ \
| | * \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-02-28-640/+3736
| | |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/Makefile Fix the merge conflict in file drivers/Makefile Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * \ \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-02-12-10/+18
| | |\ \ \ \ \ \ \ \ \
| | * \ \ \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-01-30-4/+207
| | |\ \ \ \ \ \ \ \ \ \
| | * \ \ \ \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-01-22-94/+155
| | |\ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/cfi_flash.c The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support mpc7448hpc2 board.
| | * \ \ \ \ \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-01-04-4/+65
| | |\ \ \ \ \ \ \ \ \ \ \ \
| | * | | | | | | | | | | | | Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The originalroy zang2006-12-04-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | multiplier table can not refect the real PLL clock behavior of these processors. Please refer to the hardware specification for detailed information of the corresponding processors. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * | | | | | | | | | | | | Fix the exception occuring in RAM table search issue.roy zang2006-12-01-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original search_one_table() function code can only processes the search for the exception occurring in FLASH/ROM, because the exception and fixup table usually locate in FLASH. If the exception address is also in FLASH, it will be OK. If the exception occurs in RAM, after the u-boot relocation, a relocation offset should be added. clean up the code in cpu/74xx_7xx/cpu.c Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * | | | | | | | | | | | | Fix the confilcts when merging 'master' into hpc2.roy zang2006-12-01-722/+858
| | |\ \ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conflicts due to a new mpc7448 p3m7448 board is in the main tree. Merge branch 'master' into hpc2 Conflicts: MAKEALL cpu/74xx_7xx/cpu.c cpu/74xx_7xx/cpu_init.c cpu/74xx_7xx/speed.c
| | * | | | | | | | | | | | | | Clean up the code according to codestyle:roy zang2006-12-01-47/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (1) remove some C++ comments. (2) remove trailing white space. (3) remove trailing empty line. (4) Indentation by table. (5) remove {} in one line condition. (6) add space before '(' in function call. Remove some weird printf () output. Add necessary comments. Modified Makefile to support building in a separate directory.
| | * | | | | | | | | | | | | | Solve the copyright conflicts when merging 'master' into hpc2.roy zang2006-11-29-46/+47
| | |\ \ \ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge branch 'master' into hpc2 Conflicts: drivers/cfi_flash.c
| | * | | | | | | | | | | | | | | General code modification for mpc7448hpc2 board support.roy zang2006-11-02-8/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add 7447A and 7448 processor support. 2. Add the following flags. CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically (such as by switch on board), this flag should be set. CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot relocates to RAM, this flag should be set. CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the system hang in exception, this flag should be set. There is a design issue for tsi108/109 pci configure read. When pci scan the slots, if there is no pci card, the tsi108/9 will cause a machine check exception for mpc7448 processor. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* | | | | | | | | | | | | | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup.Wolfgang Denk2007-04-18-898/+1022
|\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \
generated by cgit v1.1 at 2024-11-23 06:55:37 +0000