summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Coding style cleanupStefan Roese2007-10-02-12/+12
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* Program EPLD to force full duplex mode for PHY.Grzegorz Bernacki2007-10-02-4/+8
| | | | | | | EPLD forces modes of PHY operation. By default full duplex is turned off. This fix turns it on. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* [PPC440SPe] Improve PCIe configuration space accessGrzegorz Bernacki2007-09-07-31/+97
| | | | | | | | | | | | | - correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* [PPC440SPe] Convert machine check exceptions handlingGrzegorz Bernacki2007-09-07-44/+37
| | | | | | | | | | | | | | | | Convert using fixup mechanism to suppressing MCK for the duration of config read/write transaction: while fixups work fine with the case of a precise exception, we identified a major drawback with this approach when there's an imprecise case. In this scenario there is the following race condition: the fixup is (by design) set to catch the instruction following the one actually causing the exception; if an interrupt (e.g. decrementer) happens between those two instructions, the ISR code is executed before the fixup handler the machine check is no longer protected by the fixup handler as it appears as within the ISR code. In consequence the fixup approach is being phased out and replaced with explicit suppressing of MCK during a PCIe config read/write cycle. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* lib_ppc: make board_add_ram_info weakKim Phillips2007-08-18-2/+0
| | | | | | | | | | | | platforms wishing to display RAM diagnostics in addition to size, can do so, on one line, in their own board_add_ram_info() implementation. this consequently eliminates CONFIG_ADD_RAM_INFO. Thanks to Stefan for the hint. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-14-25/+75
|\
| * Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-07-383/+643
| |\
| | * Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-06-23/+23
| | |\
| | | * Coding style cleanup. Update CHANGELOG.Wolfgang Denk2007-08-06-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| | | * Merge branch 'testing' into workingAndy Fleming2007-08-03-23/+23
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| | | | * cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-3/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | | | * cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-20/+20
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | | | * Fix problem with get/setdcr commands introduced by cfg patchesStefan Roese2007-07-06-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | | | * Fix a few file permission problems.Wolfgang Denk2007-07-04-0/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| | | | * cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-06-06-289/+362
| |\ \ \ \
| * | | | | USB: ohci fixes and cleanup for ppc4xx and yosemite board.Markus Klotzbuecher2007-06-06-1/+51
| | | | | |
| * | | | | Merge git://www.denx.de/git/u-boot into 2007_05_15-testingMarkus Klotzbuecher2007-05-29-5/+5
| |\ \ \ \ \
| * \ \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-05-07-9/+21
| |\ \ \ \ \ \
| * \ \ \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-04-23-255/+408
| |\ \ \ \ \ \ \
| * \ \ \ \ \ \ \ Merge with git://www.denx.de/git/u-boot.git#testing-USBMarkus Klotzbuecher2007-03-23-2/+2
| |\ \ \ \ \ \ \ \
| | * \ \ \ \ \ \ \ Merge with /home/mk/git/u-boot-generic_ohci#generic_ohciWolfgang Denk2006-11-27-3/+2
| | |\ \ \ \ \ \ \ \
| | | * | | | | | | | Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driverMarkus Klotzbuecher2006-11-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and adapted board configs TQM5200 and yosemite accordingly. This commit also makes the maximum number of root hub ports configurable (CFG_USB_OHCI_MAX_ROOT_PORTS).
* | | | | | | | | | | Coding style cleanupStefan Roese2007-08-14-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | | Merge with /home/stefan/git/u-boot/zeusStefan Roese2007-08-14-30/+67
|\ \ \ \ \ \ \ \ \ \ \
| * | | | | | | | | | | ppc4xx: Add initial Zeus (PPC405EP) board supportStefan Roese2007-08-14-42/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | | | | | | | ppc4xx: Add support for AMCC 405EP Taihu boardJohn Otken2007-07-26-1/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: John Otken <john@softadvances.com>
* | | | | | | | | | | | ppc4xx: Fix problem in PLL clock calculationStefan Roese2007-08-13-18/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch was originall provided by David Mitchell <dmitchell@amcc.com> and fixes a bug in the PLL clock calculation. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | | | ppc4xx: Code cleanupStefan Roese2007-08-02-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | | | [ppc440SPe] Graceful recovery from machine check during PCIe configurationGrzegorz Bernacki2007-08-02-9/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During config transactions on the PCIe bus an attempt to scan for a non-existent device can lead to a machine check exception with certain peripheral devices. In order to avoid crashing in such scenarios the instrumented versions of the config cycle read routines are introduced, so the exceptions fixups framework can gracefully recover. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Acked-by: Rafal Jaworowski <raj@semihalf.com>
* | | | | | | | | | | | [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.ARafal Jaworowski2007-08-02-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This brings back separate settings for PCIe bus numbers depending on chip revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa commit. 440SPe rev. A does NOT work properly with the same settings as for the rev. B (no devices are seen on the bus during enumeration). Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
* | | | | | | | | | | | ppc4xx: Update AMCC Bamboo 440EP supportEugene OBrien2007-07-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | | | ppc4xx: Only print ECC related info when the error bis are setStefan Roese2007-07-30-14/+24
|/ / / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | | ppc4xx: Fix bug with default GPIO output valueStefan Roese2007-07-20-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As spotted by Matthias Fuchs, the default output values for all GPIO1 outputs were not setup correctly. This patch fixes this issue. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-16-1/+1
|\ \ \ \ \ \ \ \ \ \ \ | | |_|_|_|_|_|_|/ / / | |/| | | | | | | | |
| * | | | | | | | | | Update CHANGELOG, minor coding style cleanup.Wolfgang Denk2007-07-12-1/+1
| | |_|_|_|_|_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | | | ppc4xx: Code cleanupStefan Roese2007-07-16-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | ppc4xx: Add new weak functions to support boardspecific DDR2 configurationStefan Roese2007-07-16-14/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better support non default, boardspecific DDR(2) controller configuration. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | ppc4xx: Add remove_tlb() function to remove a mem area from TLB setupStefan Roese2007-07-16-1/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new function remove_tlb() can be used to remove the TLB's used to map a specific memory region. This is especially useful for the DDR(2) setup routines which configure the SDRAM area temporarily as a cached area (for speedup on auto-calibration and ECC generation) and later need this area uncached for normal usage. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | ppc4xx: Change receive buffer handling in the 4xx emac driverStefan Roese2007-07-12-3/+5
|/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change fixes a bug in the receive buffer handling, that could lead to problems upon high network traffic (broadcasts...). Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | Coding style cleanup; update CHANGELOG.Wolfgang Denk2007-07-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | | Merge with /home/hs/Atronic/u-bootWolfgang Denk2007-07-09-41/+61
|\ \ \ \ \ \ \ \ \
| * | | | | | | | | [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANGHeiko Schocher2007-06-25-53/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * | | | | | | | | [PCS440EP] upgrade the PCS440EP board:Heiko Schocher2007-06-22-41/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | | | | | | Merged POST framework with the current TOT.Sergei Poselenov2007-07-05-0/+8
| |_|_|_|_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* | | | | | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-25-5/+7
|\ \ \ \ \ \ \ \ \
| * | | | | | | | | Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2007-06-22-5/+5
| | | | | | | | | |
| * | | | | | | | | Extend POST support for PPC440Igor Lisitsin2007-06-22-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added memory, CPU, UART, I2C and SPR POST tests for PPC440. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
* | | | | | | | | | ppc4xx: PPC440EPx Emit DDR0 registers on machine check interruptNiklaus Giger2007-06-25-1/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prints the DDR status registers upon machine check interrupt on the 440EPx/GRx. This can be useful especially when ECC support is enabled. I added some small changes to the original patch from Niklaus to make it compile clean. Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | ppc4xx: Fix O=buildir buildsNiklaus Giger2007-06-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the problem to assemble cpu/ppc4xx/start.S experienced last week where building failed having specified O=../build.sequoia. Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>