summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405Michal Simek2008-07-06-1/+1
| | | | | | | | This change helps with better handling with others Xilinx based platform. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix 460EX errata with CPU lockup upon high AHB trafficStefan Roese2008-06-30-2/+18
| | | | | | | | | | | | | | | This patch implements a fix provided by AMCC so that the lockup upon simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur anymore: Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA. This errata is not officially available yet. I'll update the comment to add the errata number later. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix problem in gpio_config()Stefan Roese2008-06-23-2/+2
| | | | | | | As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted left by one. So the additional shift is bogus. Signed-off-by: Stefan Roese <sr@denx.de>
* Change initdram() return type to phys_size_tBecky Bruce2008-06-12-5/+5
| | | | | | | | | | | | | | | | | | | This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config optionsStefan Roese2008-06-06-5/+5
| | | | | | | | We use upper case letters for the AMCC processor defines (like CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and not CONFIG_440SPe. This patch fixes the last misspelled config options. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Remove superfluous dram_init() call or replace it by initdram()Stefan Roese2008-06-03-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC codeStefan Roese2008-06-03-2/+3
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix common ECC generation code for 440GP style platformsStefan Roese2008-06-03-7/+34
| | | | | | | | | | | | This patch makes the common 4xx ECC code really usable on 440GP style platforms. Since the IBM DDR controller used on 440GP/GX/EP/GR is not register compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT we need to make some processor dependant defines used later on by the driver. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Change Kilauea to use the common DDR2 init functionStefan Roese2008-06-03-0/+11
| | | | | | | | | | | This patch changes the kilauea and kilauea_nand (for NAND booting) board port to not use a board specific DDR2 init routine anymore. Now the common code from cpu/ppc4xx is used. Thanks to Grant Erickson for all his basic work on this 405EX early bootup. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1Stefan Roese2008-06-03-151/+0
| | | | | | | | | | | | | | | | | | | This patch removes all SDRAM related defines from the PPC4xx headers ppc405.h and ppc440.h. This is needed since now some 405 PPC's use the same SDRAM controller as 440 systems do (like 405EX and 440SP). It also introduces new defines for the equipped SDRAM controller based on which PPC variant is used. There new defines are: used on 405GR/CR/EP and some Xilinx Virtex boards. used on 440GP/GX/EP/GR. used on 440EPx/GRx. used on 405EX/r/440SP/SPe/460EX/GT. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.SStefan Roese2008-06-03-126/+80
| | | | | | | | | | | | | | | | | This patch consolidates the 405 and 440 parts of the NAND booting code selected via CONFIG_NAND_SPL. Now common code is used to initialize the SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc. Only *after* running from this location, nand_boot() is called. Please note that the initsdram() call is now moved from nand_boot.c to start.S. I experienced problems with some boards like Kilauea (405EX), which don't have internal SRAM (OCM) and relocation needs to be done to SDRAM before the NAND controller can get accessed. When initdram() is called later on in nand_boot(), this can lead to problems with variables in the bss sections like nand_ecc_pos[]. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Scott Wood <scottwood@freescale.com>
* ppc4xx: Enable Primordial Stack for 40x and Unify ECC HandlingGrant Erickson2008-06-03-259/+526
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (Part 1 of 2): * Rolls up a suite of changes to enable correct primordial stack and global data handling when the data cache is used for such a purpose for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS). * Related to the first, unifies DDR2 SDRAM and ECC initialization by eliminating redundant ECC initialization implementations and moving redundant SDRAM initialization out of board code into shared 4xx code. * Enables MCSR visibility on the 405EX(r). * Enables the use of the data cache for initial RAM on both AMCC's Kilauea and Makalu and removes a redundant CFG_POST_MEMORY flag from each board's CONFIG_POST value. - Removed, per Stefan Roese's request, defunct memory.c file for Makalu and rolled sdram_init from it into makalu.c. With respect to the 4xx DDR initialization and ECC unification, there is certainly more work that can and should be done (file renaming, etc.). However, that can be handled at a later date on a second or third pass. As it stands, this patch moves things forward in an incremental yet positive way for those platforms that utilize this code and the features associated with it. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
* PPC4xx: Simplified post_word_{load, store}Grant Erickson2008-06-03-15/+11
| | | | | | | This patch simplifies post_word_{load,store} by using the preprocessor to eliminate redundant, copy-and-pasted code. Signed-off-by: Grant Erickson <gerickson@nuovations.com>
* Big white-space cleanup.Wolfgang Denk2008-05-21-36/+36
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Add 405EX(r) revision C PVR definitions and detection codeStefan Roese2008-05-13-0/+20
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add weak default ft_board_setup() routineStefan Roese2008-05-08-3/+23
| | | | | | | | This patch adds a default ft_board_setup() routine to the 4xx fdt code. This routine is defined as weak and can be overwritten by a board specific one if needed. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix typos in 460GT/EX FBDV arrayDave Mitchell2008-05-08-1/+1
| | | | | | | Corrected two typos in the 460GT/EX FBDV array. Signed-off-by: Dave Mitchell <dmitchell@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.cStefan Roese2008-04-30-2/+5
| | | | | | | | | This patch fixes a problem with DIMMs that have 8 banks. Now the MCIF0_MBxCF register will be setup correctly for this setup too. This was noticed with the 512MB DIMM on Canyonlands/Glacier. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix compilation warning in denali_spd_ddr2.cStefan Roese2008-04-29-0/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Complete remove bogus dflush()Stefan Roese2008-04-29-33/+5
| | | | | | | | | | Since the current dflush() implementation is know to have some problems (as seem on lwmon5 ECC init) this patch removes it completely and replaces it by using clean_dcache_range(). Tested on Katmai with ECC DIMM. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fixup ebc clock in FDT for 405GP/EPMarkus Brunner2008-04-29-2/+8
| | | | | | | | On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc doesn't exist. Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-04-26-0/+42
|\
| * ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdtStefan Roese2008-04-25-0/+42
| | | | | | | | | | | | | | | | | | | | The PCIe root-complex/endpoint setup as configured via the "pcie_mode" environment variable will now get passed to the Linux kernel by setting the device_type property of the PCIe device tree node. For normal root- complex configuration it will keep its defaults value of "pci" and for endpoint configuration it will get changed to "pci-endpoint". Signed-off-by: Stefan Roese <sr@denx.de>
* | USB: fix more GCC 4.2.x aliasing warningsWolfgang Denk2008-04-25-2/+2
|/ | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Markus Klotzbuecher <mk@denx.de>
* ppc4xx: Add dcache_enable() for 440Stefan Roese2008-04-22-0/+2
| | | | | | | | | | | | dcache_enable() was missing for 440 and the patch 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf "] behavior uses this function. Note: Currently the cache handling functions like d/icache_disable/enable() are NOP's on 440. This may be changed in the future. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix sys_get_info() for 405GP(r)Matthias Fuchs2008-04-21-0/+2
| | | | | | | | This patch assigns the correct EBC clock for 405GP(r) CPUs to PPC4xx_SYS_INFO structure. Without this patch U-Boot uses an uninitialized EBC clock in its startup message. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* Fix crash on sequoia in ppc_4xx_eth_initAnatolij Gustschin2008-04-18-0/+4
| | | | | | | | Currently U-Boot crashes in ppc_4xx_eth_init on sequoia with cache enabled (TLB Parity exeption). This patch fixes the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* ppc4xx: Fix crash on sequoia with cache enabledAnatolij Gustschin2008-04-18-1/+3
| | | | | | | | | | | Currently U-Boot crashes on sequoia board in CPU POST if cache is enabled (CONFIG_4xx_DCACHE defined). The cache won't be disabled by change_tlb before CPU POST because there is an insufficient adress range check since CFG_MEM_TOP_HIDE was introduced. This patch tries to fix this problem. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3Stefan Roese2008-04-03-3/+13
| | | | | | | | This patch fixes a problem with the RGMII setup of the 460GT. The 460GT has 2 RGMII instances and we need to configure the 2nd RGMII instance for the EMAC2+3 channels. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setupLarry Johnson2008-03-31-13/+14
| | | | Signed-off-by: Larry Johnson <lrj@acm.org>
* ppc4xx: PPC405EP Set EMAC noise filter bitsMarkus Brunner2008-03-27-1/+1
| | | | | | | | | This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPxMike Nuss2008-03-27-1/+99
| | | | | | | | | | | | On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured after startup to change the speed of the clocks. This patch adds the option CFG_PLL_RECONFIG. If this option is set to 667, the CPU initialization code will reconfigure the PLL to run the system with a CPU frequency of 667MHz and PLB frequency of 166MHz, without the need for an external EEPROM. Signed-off-by: Mike Nuss <mike@terascala.com> Acked-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix compilation warning in 4xx_enet.cStefan Roese2008-03-27-7/+6
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add AMCC Glacier 406GT eval board supportStefan Roese2008-03-27-3/+48
| | | | | | | | | | | | | | This patch adds support for the AMCC Glacier 460GT eval board. The main difference to the Canyonlands board are listed here: - 4 ethernet ports instead of 2 - no SATA port - no USB port Currently EMAC2+3 are not working. This will be fixed in a later release. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clearStefan Roese2008-03-27-3/+4
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add Canyonlands NAND booting supportStefan Roese2008-03-15-1/+7
| | | | | | | | | | | | | | | 460EX doesn't support a fixed bootstrap option to boot from 512 byte page NAND devices. The only bootstrap option for NAND booting is option F for 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap EEPROM needs to be programmed accordingly. This patch adds basic NAND booting support for the AMCC Canyonlands aval board and also adds support to the "bootstrap" command, to enable NAND booting I2C setting. Tested with 512 byte page NAND device (32MByte) on Canyonlands. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)Stefan Roese2008-03-15-7/+178
| | | | | | This patch adds basic support for the AMCC 460EX/460GT PPC's. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)Stefan Roese2008-03-15-93/+553
| | | | | | This patch adds basic support for the AMCC 460EX/460GT PPC's. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: interrupt.c reworkedStefan Roese2008-03-15-448/+141
| | | | | | | | This patch is a rework of the 4xx interrupt handling done while adding the 460EX/GT support. Interrupts are needed on 4xx for the EMAC driver. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: program_tlb now uses 64bit physical addessStefan Roese2008-03-15-13/+14
| | | | | | | | This patch changes the physical addess parameter from 32bit to 64bit. This is needed for 36bit 4xx platforms to access areas located beyond the 4GB border, like SoC peripherals (EBC etc.). Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: miiphy.c reworkedStefan Roese2008-03-15-116/+80
| | | | | | | While adding the 460EX/GT support I reworked the 4xx miiphy code. It badly neede some cleanup. Signed-off-by: Stefan Roese <sr@denx.de>
* PPC4xx (Sequoia): Fix Ethernet "remote fault" problemsMike Nuss2008-03-04-3/+2
| | | | | | | | | | | | | | Every now and then a Sequoia board (or equivalent hardware) had problems connecting to a Gigabit capable network interface. There were differences in the PHY setup between Linux and U-Boot. This patch fixes the problem. Apparently "remote fault" is being set, which signals to some devices (on the other end of the cable) that a fault has occurred, while other devices ignore it. I believe the RF bit was causing the issue, but I removed T4 also, to match up with Linux. Signed-off-by: Mike Nuss <mike@terascala.com>
* ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1Stefan Roese2008-03-02-2/+3
| | | | | | | | | The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But currently 4k/2k is configured. This patch fixes this issue. Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix problem in 4xx_enet.c driverAnatolij Gustschin2008-03-02-1/+9
| | | | | | | | | | U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is enabled. To reproduce the problem ensure that 'ethrotate' environment variable isn't set to "no" and then run "tftp 200000 not_existent_file". This patch tries to fix the issue. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.Shinya Kuribayashi2008-02-23-1/+1
| | | | | | This will reduce the build time. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-02-15-5/+9
|\
| * ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD codeLarry Johnson2008-02-14-3/+3
| | | | | | | | Signed-off-by: Larry Johnson <lrj@acm.org>
| * ppc4xx: Fix ndfc HW ECC byte orderStefan Roese2008-02-04-2/+2
| | | | | | | | | | | | | | | | | | | | | | The current ndfc HW ECC implementation swaps the first two ECC bytes. But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering, so this swapping in the HW ECC driver is bogus. This patch fixes this problem and now really uses the SMC ECC byte order. Thanks to Sean MacLennan for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Fix problem with init-ram bigger than 4k on 440 platformsStefan Roese2008-02-04-0/+4
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | PPC: Use r2 instead of r29 as global data pointerWolfgang Denk2008-02-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.1 at 2024-11-21 21:22:28 +0000