summaryrefslogtreecommitdiff
path: root/cpu/mpc8xxx
Commit message (Collapse)AuthorAgeLines
* ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().Poonam Aggrwal2009-09-08-6/+0
| | | | | | | While in probecpu() UART is still not initialized. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx/86xx: Device tree fixup for number of coresPoonam Aggrwal2009-09-08-0/+56
| | | | | | | | | | | | | | Fixing the number of cores in the device tree based on the actual number of cores on the system. With this same device tree image can be used for dual core and single core members of otherwise exactly same SOC. For example: * P2020RDB and P2010RDB * P1020RDB and P1011RDB * MPC8641D and MPC8641 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx,86xx: Handling Unknown SOC versionPoonam Aggrwal2009-09-08-2/+3
| | | | | | | | | | | Incase the system is detected with Unknown SVR, let the system boot with a default value and a proper message. Now with dynamic detection of SOC properties from SVR, this is necessary to prevent a crash. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Refactor code to determine if PCI is enabled & agent/hostKumar Gala2009-09-08-0/+226
| | | | | | | | | | | Refactor the code into a simple bitmask lookup table that determines if a given PCI controller is enabled and if its in host/root-complex or agent/end-point mode. Each processor in the PQ3/MPC86xx family specified different encodings for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Remove ddr_pd_cntl register since it doesn't existKumar Gala2009-09-08-23/+0
| | | | | | | | The ddr_pd_cntl isn't defined in any reference manual and thus we wil remove especially since we set it to 0, which would most likely be its POR value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added single core members of FSL P1xx/P2xx processors seriesPoonam Aggrwal2009-08-28-2/+6
| | | | | | | | P1011 - Single core variant of P1020 P2010 - Single core variant of P2020 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added P1020 Processor Support.Poonam Aggrwal2009-08-28-0/+2
| | | | | | | | | | | | | | P1020 is another member of QorIQ series of processors which falls in ULE category. It is an e500 based dual core SOC. Being a scaled down version of P2020 it has following differences: - 533MHz - 800MHz core frequency. - 256Kbyte L2 cache - Ethernet controllers with classification capabilities. Also the SOC is pin compatible with P2020 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xxPoonam Aggrwal2009-08-28-34/+59
| | | | | | | | | | | | | The number of CPUs are getting detected dynamically by checking the processor SVR value. Also removed CONFIG_NUM_CPUS references from all the platforms with 85xx/86xx processors. This can help to use the same u-boot image across the platforms. Also revamped and corrected few Freescale Copyright messages. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Refactored common cpu specific code for 85xx/86xx into one file.Poonam Aggrwal2009-08-28-0/+131
| | | | | | | | Removed same code pieces from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c and moved to cpu/mpc8xxx/cpu.c(new file) Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx, 86xx: Add common board_add_ram_info()Peter Tyser2009-07-22-41/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, 85xx and 86xx boards would display DRAM information on bootup such as: ... I2C: ready DRAM: Memory controller interleaving enabled: Bank interleaving! 2 GB FLASH: 256 MB ... This patch moves the printing of the DRAM controller configuration to a common board_add_ram_info() function which prints out DDR type, width, CAS latency, and ECC mode. It also makes the DDR interleaving information print out in a more sane manner: ... I2C: ready DRAM: 2 GB (DDR2, 64-bit, CL=4, ECC on) DDR Controller Interleaving Mode: bank FLASH: 256 MB ... Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl_ddr: Fix DDR3 calculation of rank density with 8GB or moreTimur Tabi2009-07-01-1/+1
| | | | | | | | | | The calculate for rank density in compute_ranksize() for DDR3 used all integers for the expression, so the result was also a 32-bit integer, even though the 'bsize' variable is a u64. Fix the expression to calculate a true 64-bit value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BITKumar Gala2009-06-12-39/+41
| | | | | | | | | | | | | | | The ddr code computes most things as 64-bit quantities and had some places in the middle that it was using phy_addr_t and phys_size_t. Instead we use unsigned long long through out and only at the last stage of setting the LAWs and reporting the amount of memory to the board code do we truncate down to what we can cover via phys_size_t. This has the added benefit that the DDR controller itself is always setup the same way regardless of how much memory we have. Its only the LAW setup that limits what is visible to the system. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: add the DDR3 SPD infrastructureDave Liu2009-03-30-46/+754
| | | | | | | | | - support mirrored DIMMs, not support register DIMMs - test passed on P2020DS board with MT9JSF12872AY-1G1D1 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
* fsl-ddr: Fix two bugs in the ddr infrastructureDave Liu2009-03-30-1/+4
| | | | | | | | | | | | 1. wr_lat UM said the total write latency for DDR2 is equal to WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1. so, the WR_LAT = CL - 1; 2. rd_to_pre we missed to add the ADD_LAT for DDR2 case. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Dave Liu <daveliu@freescale.com>
* fsl-ddr: Allow system to boot if we have more than 4G of memoryKumar Gala2009-02-16-1/+1
| | | | | | | | | | Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report an error and hang. Instead of doing that since DDR is mapped in the lowest priority LAWs we setup the DDR controller and the max amount of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED) Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
* fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controllerKumar Gala2009-02-16-0/+4
| | | | | | | | If we only have one controller we can completely ignore how memctl_intlv_ctl is set. Otherwise other levels of code get confused and think we have twice as much memory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: use the 1T timing as default configurationDave Liu2009-01-23-1/+1
| | | | | | | | | For light loaded system, we use the 1T timing to gain better memory performance, but for some heavily loaded system, you have to add the 2T timing options to board files. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: make the self refresh idle threshold configurableDave Liu2009-01-23-4/+8
| | | | | | | | | | | | | Some 85xx processors have the advanced power management feature, such as wake up ARP, that needs enable the automatic self refresh. If the DDR controller pass the SR_IT (self refresh idle threshold) idle cycles, it will automatically enter self refresh. However, anytime one transaction is issued to the DDR controller, it will reset the counter and exit self refresh state. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: clean up the ddr code for DDR3 controllerDave Liu2009-01-23-11/+13
| | | | | | | | - The DDR3 controller is expanding the bits for timing config - Add the DDR3 32-bit bus mode support Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: update the bit mask for DDR3 controllerDave Liu2009-01-23-4/+8
| | | | | | | | According to the latest 8572 UM, the DDR3 controller is expanding the bit mask, and we use the extend ACTTOPRE mode when tRAS more than 19 MCLK. Signed-off-by: Dave Liu <daveliu@freescale.com>
* fsl ddr skip interleaving if not supported.Ed Swarthout2008-12-03-12/+17
| | | | | | | | | Removed while(1) hang if memctl_intlv_ctl is set wrong. Remove embedded tabs from strings. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* Add debug information for DDR controller registersHaiying Wang2008-10-18-0/+13
| | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Check DDR interleaving modeHaiying Wang2008-10-18-5/+112
| | | | | | | | | * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and ba_intlv_ctl. * Print DDR interleaving mode information * Add doc/README.fsl-ddr to describe the interleaving setting Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Pass dimm parameters to populate populate controller optionsHaiying Wang2008-10-18-87/+7
| | | | | | | | | | | | | Because some dimm parameters like n_ranks needs to be used with the board frequency to choose the board parameters like clk_adjust etc. in the board_specific_paramesters table of the board ddr file, we need to pass the dimm parameters to the board file. * move ddr dimm parameters header file from /cpu to /include directory. * add ddr dimm parameters to populate board specific options. * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Make DDR interleaving mode work correctlyHaiying Wang2008-10-18-12/+54
| | | | | | | | | | Fix some bugs: 1. Correctly set intlv_ctl in cs_config. 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled. 3. Set base_address and total memory for each ddr controller in memory controller interleaving mode. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-7/+7
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Coding style cleanup, update CHANGELOGWolfgang Denk2008-09-13-15/+15
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix compiler warning in mpc8xxx ddr codeKumar Gala2008-09-07-2/+4
| | | | | | | | | | | ctrl_regs.c: In function 'compute_fsl_memctl_config_regs': ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function ctrl_regs.c:523: note: 'caslat' was declared here Add a warning in DDR1 case if cas_latency isn't a value we know about. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* FSL DDR: Add DDR2 DIMM paramter supportKumar Gala2008-08-27-0/+339
| | | | | | | | Compute DIMM parameters based upon the SPD information. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Add DDR1 DIMM paramter supportKumar Gala2008-08-27-0/+343
| | | | | | | | Compute DIMM parameters based upon the SPD information in spd. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.Kumar Gala2008-08-27-0/+2418
The main purpose of this rewrite it to be able to share the same initialization code on all FSL PowerPC products that have DDR controllers. (83xx, 85xx, 86xx). The code is broken up into the following steps: GET_SPD COMPUTE_DIMM_PARMS COMPUTE_COMMON_PARMS GATHER_OPTS ASSIGN_ADDRESSES COMPUTE_REGS PROGRAM_REGS This allows us to share more code an easily allow for board specific code overrides. Additionally this code base adds support for >4G of DDR and provides a foundation for supporting interleaving on processors with more than one controller. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-12-21 04:58:19 +0000