summaryrefslogtreecommitdiff
path: root/cpu/mpc8xxx/ddr
Commit message (Collapse)AuthorAgeLines
* ppc/8xxx: Misc DDR related fixesKumar Gala2009-09-15-7/+7
| | | | | | | * Fix setting of ESDMODE (MR1) register - the bit shifting was wrong * Fix the format string to match size in a debug print Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Remove ddr_pd_cntl register since it doesn't existKumar Gala2009-09-08-23/+0
| | | | | | | | The ddr_pd_cntl isn't defined in any reference manual and thus we wil remove especially since we set it to 0, which would most likely be its POR value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx, 86xx: Add common board_add_ram_info()Peter Tyser2009-07-22-41/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, 85xx and 86xx boards would display DRAM information on bootup such as: ... I2C: ready DRAM: Memory controller interleaving enabled: Bank interleaving! 2 GB FLASH: 256 MB ... This patch moves the printing of the DRAM controller configuration to a common board_add_ram_info() function which prints out DDR type, width, CAS latency, and ECC mode. It also makes the DDR interleaving information print out in a more sane manner: ... I2C: ready DRAM: 2 GB (DDR2, 64-bit, CL=4, ECC on) DDR Controller Interleaving Mode: bank FLASH: 256 MB ... Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl_ddr: Fix DDR3 calculation of rank density with 8GB or moreTimur Tabi2009-07-01-1/+1
| | | | | | | | | | The calculate for rank density in compute_ranksize() for DDR3 used all integers for the expression, so the result was also a 32-bit integer, even though the 'bsize' variable is a u64. Fix the expression to calculate a true 64-bit value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BITKumar Gala2009-06-12-39/+41
| | | | | | | | | | | | | | | The ddr code computes most things as 64-bit quantities and had some places in the middle that it was using phy_addr_t and phys_size_t. Instead we use unsigned long long through out and only at the last stage of setting the LAWs and reporting the amount of memory to the board code do we truncate down to what we can cover via phys_size_t. This has the added benefit that the DDR controller itself is always setup the same way regardless of how much memory we have. Its only the LAW setup that limits what is visible to the system. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: add the DDR3 SPD infrastructureDave Liu2009-03-30-46/+754
| | | | | | | | | - support mirrored DIMMs, not support register DIMMs - test passed on P2020DS board with MT9JSF12872AY-1G1D1 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
* fsl-ddr: Fix two bugs in the ddr infrastructureDave Liu2009-03-30-1/+4
| | | | | | | | | | | | 1. wr_lat UM said the total write latency for DDR2 is equal to WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1. so, the WR_LAT = CL - 1; 2. rd_to_pre we missed to add the ADD_LAT for DDR2 case. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Dave Liu <daveliu@freescale.com>
* fsl-ddr: Allow system to boot if we have more than 4G of memoryKumar Gala2009-02-16-1/+1
| | | | | | | | | | Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report an error and hang. Instead of doing that since DDR is mapped in the lowest priority LAWs we setup the DDR controller and the max amount of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED) Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
* fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controllerKumar Gala2009-02-16-0/+4
| | | | | | | | If we only have one controller we can completely ignore how memctl_intlv_ctl is set. Otherwise other levels of code get confused and think we have twice as much memory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: use the 1T timing as default configurationDave Liu2009-01-23-1/+1
| | | | | | | | | For light loaded system, we use the 1T timing to gain better memory performance, but for some heavily loaded system, you have to add the 2T timing options to board files. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: make the self refresh idle threshold configurableDave Liu2009-01-23-4/+8
| | | | | | | | | | | | | Some 85xx processors have the advanced power management feature, such as wake up ARP, that needs enable the automatic self refresh. If the DDR controller pass the SR_IT (self refresh idle threshold) idle cycles, it will automatically enter self refresh. However, anytime one transaction is issued to the DDR controller, it will reset the counter and exit self refresh state. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: clean up the ddr code for DDR3 controllerDave Liu2009-01-23-11/+13
| | | | | | | | - The DDR3 controller is expanding the bits for timing config - Add the DDR3 32-bit bus mode support Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* fsl-ddr: update the bit mask for DDR3 controllerDave Liu2009-01-23-4/+8
| | | | | | | | According to the latest 8572 UM, the DDR3 controller is expanding the bit mask, and we use the extend ACTTOPRE mode when tRAS more than 19 MCLK. Signed-off-by: Dave Liu <daveliu@freescale.com>
* fsl ddr skip interleaving if not supported.Ed Swarthout2008-12-03-12/+17
| | | | | | | | | Removed while(1) hang if memctl_intlv_ctl is set wrong. Remove embedded tabs from strings. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* Add debug information for DDR controller registersHaiying Wang2008-10-18-0/+13
| | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Check DDR interleaving modeHaiying Wang2008-10-18-5/+112
| | | | | | | | | * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and ba_intlv_ctl. * Print DDR interleaving mode information * Add doc/README.fsl-ddr to describe the interleaving setting Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Pass dimm parameters to populate populate controller optionsHaiying Wang2008-10-18-87/+7
| | | | | | | | | | | | | Because some dimm parameters like n_ranks needs to be used with the board frequency to choose the board parameters like clk_adjust etc. in the board_specific_paramesters table of the board ddr file, we need to pass the dimm parameters to the board file. * move ddr dimm parameters header file from /cpu to /include directory. * add ddr dimm parameters to populate board specific options. * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Make DDR interleaving mode work correctlyHaiying Wang2008-10-18-12/+54
| | | | | | | | | | Fix some bugs: 1. Correctly set intlv_ctl in cs_config. 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled. 3. Set base_address and total memory for each ddr controller in memory controller interleaving mode. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-7/+7
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Coding style cleanup, update CHANGELOGWolfgang Denk2008-09-13-15/+15
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix compiler warning in mpc8xxx ddr codeKumar Gala2008-09-07-2/+4
| | | | | | | | | | | ctrl_regs.c: In function 'compute_fsl_memctl_config_regs': ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function ctrl_regs.c:523: note: 'caslat' was declared here Add a warning in DDR1 case if cas_latency isn't a value we know about. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* FSL DDR: Add DDR2 DIMM paramter supportKumar Gala2008-08-27-0/+339
| | | | | | | | Compute DIMM parameters based upon the SPD information. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Add DDR1 DIMM paramter supportKumar Gala2008-08-27-0/+343
| | | | | | | | Compute DIMM parameters based upon the SPD information in spd. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.Kumar Gala2008-08-27-0/+2418
The main purpose of this rewrite it to be able to share the same initialization code on all FSL PowerPC products that have DDR controllers. (83xx, 85xx, 86xx). The code is broken up into the following steps: GET_SPD COMPUTE_DIMM_PARMS COMPUTE_COMMON_PARMS GATHER_OPTS ASSIGN_ADDRESSES COMPUTE_REGS PROGRAM_REGS This allows us to share more code an easily allow for board specific code overrides. Additionally this code base adds support for >4G of DDR and provides a foundation for supporting interleaving on processors with more than one controller. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-12-29 06:20:22 +0000