summaryrefslogtreecommitdiff
path: root/cpu/mpc86xx
Commit message (Collapse)AuthorAgeLines
* 86xx: remove redudant code with lib_ppc/interrupts.cKumar Gala2008-10-13-124/+7
| | | | | | | | | | For some reason we duplicated the majority of code in lib_ppc/interrupts.c Not know how that happened, but there is no good reason for it. Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why they exist. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Pass in tsec_info struct through tsec_initializeAndy Fleming2008-09-02-19/+7
| | | | | | | | | | | | | The tsec driver contains a hard-coded array of configuration information for the tsec ethernet controllers. We create a default function that works for most tsecs, and allow that to be overridden by board code. It creates an array of tsec_info structures, which are then parsed by the corresponding driver instance to determine configuration. Also, add regs, miiregs, and devname fields to the tsec_info structure, so that we don't need the kludgy "index" parameter. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.Kumar Gala2008-08-28-1/+0
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Remove old SPD support from cpu/mpc86xxKumar Gala2008-08-27-1352/+0
| | | | | | | All 86xx boards have been converted to the new code so we can remove the old SPD DDR setup code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Add 86xx specific register settingKumar Gala2008-08-27-0/+92
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.Kumar Gala2008-08-27-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The main purpose of this rewrite it to be able to share the same initialization code on all FSL PowerPC products that have DDR controllers. (83xx, 85xx, 86xx). The code is broken up into the following steps: GET_SPD COMPUTE_DIMM_PARMS COMPUTE_COMMON_PARMS GATHER_OPTS ASSIGN_ADDRESSES COMPUTE_REGS PROGRAM_REGS This allows us to share more code an easily allow for board specific code overrides. Additionally this code base adds support for >4G of DDR and provides a foundation for supporting interleaving on processors with more than one controller. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fdt: rework fdt_fixup_ethernet() to use env instead of bd_tKumar Gala2008-08-21-1/+1
| | | | | | | | | | Move to using the environment variables 'ethaddr', 'eth1addr', etc.. instead of bd->bi_enetaddr, bi_enet1addr, etc. This makes the code a bit more flexible to the number of ethernet interfaces. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Clean up usage of icache_disable/dcache_disableKumar Gala2008-08-19-0/+4
| | | | | | | | | | | | There is no point in disabling the icache on 7xx/74xx/86xx parts and not also flushing the icache. All callers of invalidate_l1_instruction_cache() call icache_disable() right after. Make it so icache_disable() calls invalidate_l1_instruction_cache() for us. Also, dcache_disable() already calls dcache_flush() so there is no point in the explicit calls of dcache_flush(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* POWERPC 86xx: Move BAT setup code to CBecky Bruce2008-08-11-119/+25
| | | | | | | | | | This is needed because we will be possibly be locating devices at physical addresses above 32bits, and the asm preprocessing does not appear to deal with ULL constants properly. We now call write_bat in lib_ppc/bat_rw.c. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreqPaul Gortmaker2008-07-14-1/+1
| | | | | | | | | | Some boards that have external 16550 UARTs don't have a direct tie between bi_busfreq and the clock used for the UARTs. Boards that do have such a tie should set CFG_NS16550_CLK to be get_bus_freq(0) -- which most of them do already. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* Fix some more print() format errors.Wolfgang Denk2008-07-11-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge commit 'wd/master'Jon Loeliger2008-07-10-0/+26
|\
| * Minor coding style cleanup; update CHANGELOGWolfgang Denk2008-07-10-2/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Add mechanisms for CPU and board-specific Ethernet initializationBen Warren2008-07-06-0/+27
| | | | | | | | | | | | | | | | This patch is the first step in cleaning up net/eth.c, by moving Ethernet initialization to CPU or board-specific code. Initial implementation is only on the Freescale TSEC controller, but others will be added soon. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Feed the watchdog in u-boot for 8610 board.Jason Jin2008-07-07-0/+15
|/ | | | | | | | | The watchdog on 8610 board is enabled by setting sw[6] to on. Once enabled, the watchdog can not be disabled by software. So feed the dog in u-boot is necessary for normal operation. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2008-06-11-6/+3
|\ | | | | | | | | | | | | | | Conflicts: include/asm-ppc/fsl_lbc.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 85xx/86xx: Move to dynamic mgmt of LAWsKumar Gala2008-06-11-6/+3
| | | | | | | | | | | | | | | | | | | | | | With the new LAW interface (set_next_law) we can move to letting the system allocate which LAWs are used for what purpose. This makes life a bit easier going forward with the new DDR code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Acked-by: Becky Bruce <becky.bruce@freescale.com>
* | MPC86xx: Change traps.c to not reference non-addressable memoryBecky Bruce2008-06-06-1/+7
|/ | | | | | | | | | | | Currently, END_OF_RAM is used by the trap code to determine if we should attempt to access the stack pointer or not. However, on systems with a lot of RAM, only a subset of the RAM is guaranteed to be mapped in and accessible. Change END_OF_RAM to use get_effective_memsize() instead of using the raw ram size out of the bd to prevent us from trying to access non-mapped memory. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* PPC: 86xx Add bat registers to reginfo commandBecky Bruce2008-06-03-1/+3
| | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* Big white-space cleanup.Wolfgang Denk2008-05-21-8/+8
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* 7450 and 86xx L2 cache invalidate bug correctionsWheatley Travis2008-05-09-1/+1
| | | | | | | | | | | | | | The 7610 and related parts have an L2IP bit in the L2CR that is monitored to signal when the L2 cache invalidate is complete whereas the 7450 and related parts utilize L2I for this purpose. However, the current code does not account for this difference. Additionally the 86xx L2 cache invalidate code used an "andi" instruction where an "andis" instruction should have been used. This patch addresses both of these bugs. Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com> Acked-By: Jon Loeliger <jdl@freescale.com>
* Fix calculation of I2C clock for some 86xx chipsTimur Tabi2008-04-30-1/+13
| | | | | | | | | Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Signed-off-by: Timur Tabi <timur@freescale.com>
* 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docsKumar Gala2008-04-29-2/+2
| | | | | | | All the 85xx and 86xx UM describe the register as timing_cfg_3 not as ext_refrec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Update SVR numbers to expand supportAndy Fleming2008-03-26-1/+1
| | | | | | | | | | | | | FSL has taken to using SVR[16:23] as an SOC sub-version field. This is used to distinguish certain variants within an SOC family. To account for this, we add the SVR_SOC_VER() macro, and update the SVR_* constants to reflect the larger value. We also add SVR numbers for all of the current variants. Finally, to make things neater, rather than use an enormous switch statement to print out the CPU type, we create and array of SVR/name pairs (using a macro), and print out the CPU name that matches the SVR SOC version. Signed-off-by: Andy Fleming <afleming@freescale.com>
* 86xx: Convert sbc8641d to use libfdt.Jon Loeliger2008-02-18-66/+47
| | | | | | | | | | | | | | | This is the proper fix for a missing closing brace in the function ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com. The ft_cpu_setup() function in mpc8641hpcn.c should have been removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, but was missed. Only, the sbc8641d was nominally still using it. It all got ripped out, and the funcality that was in ft_board_setup() was refactored to remove the CPU portions into the new file cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now. Based loosely on an original patch from joe.hamman@embeddedspecialties.com Signed-off-by: Jon Loeliger <jdl@freescale.com>
* mpc86xx: Fix unused variable 'config' and 'immap'Jean-Christophe PLAGNIOL-VILLARD2008-02-18-4/+6
| | | | | | and remove useless CONFIG_DDR_INTERLEAVE Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'Jean-Christophe PLAGNIOL-VILLARD2008-02-18-0/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk2008-02-15-79/+108
|\ | | | | | | | | | | | | | | Conflicts: common/cmd_reginfo.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 86xx: Add reginfo commandBecky Bruce2008-01-24-1/+23
| | | | | | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
| * 86xx: Remove old-style law setup codeBecky Bruce2008-01-24-32/+0
| | | | | | | | | | | | This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
| * 86xx: Support new law setup method and convert mpc8641Becky Bruce2008-01-24-1/+24
| | | | | | | | | | | | | | | | Adds the support code in cpu/mpc86xx for the new law setup code recently created fsl_law.c, and changes the MPC8641HPCN config to use this code. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
| * 86xx: Rearrange the sequence in start.SBecky Bruce2008-01-24-53/+69
| | | | | | | | | | | | | | | | | | | | | | | | * split the BAT initialization so that only 2 BATs (for the boot page and stack) are programmed very early on. The rest are initialized later. * Move other BAT setup, ccsrbar setup, and law setup later in the code after translation has been enabled. These changes will facilitate the moving of law and BAT initialization to C code, and will aid with 36-bit physical addressing support. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* | 85xx, 86xx: Determine I2C clock frequencies and store in global_dataTimur Tabi2008-02-14-0/+2
| | | | | | | | | | | | | | | | | | Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. Update the get_clocks() function in 85xx and 86xx to determine the I2C clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. Signed-off-by: Timur Tabi <timur@freescale.com>
* | PPC: Use r2 instead of r29 as global data pointerWolfgang Denk2008-02-14-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | ppc: Refactor cache routines, so there is only one common set.Rafal Jaworowski2008-02-14-44/+0
|/ | | | Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
* 86xx: Support 2GB DIMMsBecky Bruce2008-01-10-1/+10
| | | | | | | | Configure the number of bits used to address the banks inside the SDRAM device. The default register value of 0 means 2 bits to address 4 banks. Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks. Signed-off-by: Becky Bruce <bgill@freescale.com>
* Merge commit 'remotes/wd/master'Jon Loeliger2007-11-20-1/+6
|\
| * Fix compiler warnings for PPC systems. Update CHANGELOG.Wolfgang Denk2007-11-18-1/+6
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 86xx: Fix broken variable reference when #def DEBUGing.Jon Loeliger2007-11-17-2/+4
| | | | | | | | | | | | Sometimes you can't reference the DDR2 controller variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * make 8610 board use pixis resetJason Jin2007-11-17-2/+2
| | | | | | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* | make 8610 board use pixis resetJason Jin2007-11-07-2/+2
| | | | | | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* | 86xx: Fix broken variable reference when #def DEBUGing.Jon Loeliger2007-11-07-2/+4
| | | | | | | | | | | | Sometimes you can't reference the DDR2 controller variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | Initial mpc8610hpcd cpu/, README and include/ files.Jon Loeliger2007-10-17-2/+13
|/ | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Allow for fewer DDR slots per memory controller.Jon Loeliger2007-10-16-9/+21
| | | | | | | | | | | | | As a direct correlation exists between DDR DIMM slots and SPD EEPROM addresses used to configure them, use the individually defined SPD_EEPROM_ADDRESS* values to determine if a DDR DIMM slot should have its SPD configuration read or not. Effectively, this now allows for 1 or 2 DIMM slots per memory controller. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as globalWolfgang Denk2007-09-15-4/+5
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* cpu/86xx fixes.Jon Loeliger2007-08-10-97/+51
| | | | | | | | | | | | | | Remove rev 1 fixes. Always set PICGCR_MODE. Enable machine check and provide board config option to set and handle SoC error interrupts. Include MSSSR0 in error message. Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.Ed Swarthout2007-08-06-346/+2
| | | | | | | | | | | | | | | | | | All of the PCI/PCI-Express driver and initialization code that was in the MPC8641HPCN port has now been moved into the common drivers/fsl_pci_init.c. In a subsequent patch, this will be utilized by the 85xx ports as well. Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. Also enable the second PCI-Express controller on 8641 by getting its BATS and CFG_ setup right. Fixed a u16 vendor compiler warning in AHCI driver too. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fix build errors and warnings / code cleanup.Wolfgang Denk2007-08-02-3/+3
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc86xx: Remove old CFG_CMD_* references.Jon Loeliger2007-07-05-6/+6
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-6/+6
| | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
generated by cgit v1.1 at 2024-12-21 04:31:24 +0000