summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx
Commit message (Collapse)AuthorAgeLines
* common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOULHeiko Schocher2009-12-08-4/+0
| | | | | | | | | There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' into nextWolfgang Denk2009-11-15-6/+10
|\
| * ppc/85xx: Fix how we determine the number of CAM entriesKumar Gala2009-11-13-2/+2
| | | | | | | | | | | | | | | | We were incorrectly use the max CAM size as the number of entries in the array for setting up the addrmap. We should be using the NENTRY field which is the low 12-bits of TLB1CFG. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * ppc/85xx: Fix misc L2 cache enabling bugDave Liu2009-10-31-4/+8
| | | | | | | | | | | | | | We need loop-check the flash clear lock and enable bit for L2 cache. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | ppc/85xx: make boot from NAND full relocation to RAMMingkai Hu2009-11-13-1/+0
|/ | | | | | | | Take advantage of the latest full relocation commit of PPC platform for boot from NAND. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* Coding Style cleanup; update CHANGELOG, prepare -rc1v2009.11-rc1Wolfgang Denk2009-10-28-29/+29
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc85xx: Add eSDHC support for MPC8569E-MDS boardsAnton Vorontsov2009-10-27-0/+4
| | | | | | | | | | | | | | | | | | eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 (in 1-bit mode). When eSDHC is used, we should switch u-boot console to UART1, and make the proper device-tree fixups. Because of an erratum in prototype boards it is impossible to use eSDHC without disabling UART0 (which makes it quite easy to 'brick' the board by simply issung 'setenv hwconfig esdhc', and not able to interact with U-Boot anylonger). So, but default we assume that the board is a prototype, which is a most safe assumption. There is no way to determine board revision from a register, so we use hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: MP Boot Page Translation updatePeter Tyser2009-10-27-31/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix crashes due to generation of SPE instructionLeon Woestenberg2009-10-26-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot crashed on the last instruction: int parse_stream_outer(struct in_str *inp, int flag) { effa4784: 94 21 ff 38 stwu r1,-200(r1) effa4788: 7c 08 02 a6 mflr r0 effa478c: 42 9f 00 05 bcl- 20,4*cr7+so,effa4790 <parse_stream_outer+0xc> effa4790: 7d 80 00 26 mfcr r12 effa4794: 13 c1 b3 21 evstdd r30,176(r1) ...which is a SPE instruction, although -mno-spe was used. tmp/cross/ppce500v2/bin/powerpc-angstrom-linux-gnuspe-gcc --version powerpc-angstrom-linux-gnuspe-gcc (GCC) 4.3.3 Seems to be a known issue (since 2008-04?!) Googled some, turns out this patch/workaround works for me on MPC8536DS. See http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html for more info Signed-off-by: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Make L2 support more robustDave Liu2009-10-26-1/+4
| | | | | | | According the user manual, we need loop-check the L2 enable bit set. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* relocation: Do not relocate NULL pointers.Joakim Tjernlund2009-10-08-2/+4
| | | | | | | | | | NULL is an absolute value and should not be relocated. After this correction code like: void weak_fun(void) __attribute__((weak)); printf("weak_fun:%p\n", weak_fun); will still print null after relocation. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* 85xx: Ensure BSS segment isn't linked at address 0Peter Tyser2009-10-08-0/+11
| | | | | | | | | | | | | | | | When U-Boot is relocated from flash to RAM pointers are modified accordingly. However, pointers initialzed with NULL values should not be modified so that they maintain their intended NULL value. If the BSS segment is linked at address 0 its address will not be updated as necessary during relocation. This is a temporary workaround. The end goal is to add support to U-Boot to dynamically locate the BSS at an arbitrary address at runtime. When the ability to fixup the BSS inteligently is added, this workaround can be removed and the 85xx link script can put the BSS at a fixed address at link time. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* ppc: Enable full relocation to RAMPeter Tyser2009-10-03-1/+0
| | | | | | | | | | | | | The following changes allow U-Boot to fully relocate from flash to RAM: - Remove linker scripts' .fixup sections from the .text section - Add -mrelocatable to PLATFORM_RELFLAGS for all boards - Define CONFIG_RELOC_FIXUP_WORKS for all boards Previously, U-Boot would partially relocate, but statically initialized pointers needed to be manually relocated. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* ppc/p4080: Determine various chip frequencies on CoreNet platformsKumar Gala2009-09-24-4/+127
| | | | | | | | | | The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: Handle timebase enabling and frequency reportingKumar Gala2009-09-24-1/+22
| | | | | | | | | On CoreNet style platforms the timebase frequency is the bus frequency defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms the core not longer controls the enabling of the timebase. We now need to enable the boot core's timebase via CCSR register writes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: Add various p4080 related defines (and p4040)Kumar Gala2009-09-24-0/+1
| | | | | | | | | | | There are various locations that we have chip specific info: * Makefile for which ddr code to build * Added p4080 & p4040 to cpu_type_list and SVR list * Added number of LAWs for p4080 * Set CONFIG_MAX_CPUS to 8 for p4080 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: CoreNet platfrom style secondary core releaseKumar Gala2009-09-24-3/+65
| | | | | | | | | The CoreNet platform style of bringing secondary cores out of reset is a bit different that the PQ3 style. Mostly the registers that we use to setup boot translation, enable time bases, and boot release the cores have moved around. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: CoreNet platfrom style CCSRBAR settingKumar Gala2009-09-24-18/+54
| | | | | | | | On CoreNet based platforms the CCSRBAR address is split between an high & low register and we no longer shift the address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Fix enabling of L2 cacheKumar Gala2009-09-24-3/+4
| | | | | | | We need to flash invalidate the locks in addition to the cache before we enable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQVivek Mahajan2009-09-24-3/+10
| | | | | | | | The code assumed names where just numbers and always prefixed 'mpc'. However newer QorIQ don't follow the mpc naming scheme. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add cpu init config file for boot from NANDMingkai Hu2009-09-24-0/+63
| | | | | | | | | When boot from NAND, the NAND flash must be connected to br/or0. Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to it. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add ld script file for boot from NANDMingkai Hu2009-09-24-0/+67
| | | | | | | | | The first stage 4K image uses a seperate ld script file to generate 4K image. This patch moves it to the cpu/mpc85xx/* to make it avaliable for 85xx platform. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Disable all async interrupt sources when we bootKumar Gala2009-09-15-0/+11
| | | | | | | | We should make sure to clear MSR[ME, CE, DE] when we boot an OS image since we have changed the exception vectors and the OSes vectors might not be setup we should avoid async interrupts at all costs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Split out cpu_init_early into its own file for NAND_SPLKumar Gala2009-09-15-51/+77
| | | | | | | By pulling out cpu_init_early we can build just it and not all of cpu_init for NAND_SPL. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Change cpu_init_early_f so we can use with NAND SPLKumar Gala2009-09-15-9/+25
| | | | | | | Use write_tlb and don't use memset so we can use the same code for cpu_init_early_f between NAND SPL and not. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add boot from NAND/eSDHC/eSPI supportMingkai Hu2009-09-15-1/+181
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM. For all three bootup methods, the bootup process can be divided into two stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line. When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NAND loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it. The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Move code around to prep for NAND_SPLKumar Gala2009-09-15-23/+23
| | | | | | | | If we move some of the functions in tlb.c around we need less ifdefs. The first stage loader just needs invalidate_tlb and init_tlbs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Repack tlb_table to save spaceKumar Gala2009-09-15-4/+5
| | | | | | | | We can pack the initial tlb_table in MAS register format and use write_tlb to set things up. This savings can be helpful for NAND style first stage boot loaders. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Introduce low level write_tlb functionKumar Gala2009-09-15-14/+26
| | | | | | | | | Factor out the code we use to actually write a tlb entry. set_tlb is a logical view of the TLB while write_tlb is a low level matching the MAS registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Remove some bogus code from external interrupt handler.Scott Wood2009-09-15-8/+1
| | | | | | | | | Skipping the interrupted instruction will accomplish nothing other than turning a spurious interrupt into a crash. External interrupts are not machine checks, so don't count them as such. Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.Scott Wood2009-09-15-0/+7
| | | | | | | | Its reset value is random, and we sometimes read uninitialized TLB arrays. Make sure that we don't retain MAS8 from reading such an entry if the VF bit in MAS8 is set, attempts to use the mapping will trap. Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Don't enable interrupts before we're readyScott Wood2009-09-15-2/+2
| | | | | | | We cannot handle any exceptions while running in AS1, as the exceptions will transition back to AS0 without a valid mapping. Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link addressKumar Gala2009-09-09-3/+7
| | | | | | | | | | Some board ports place TEXT_BASE at a location that would cause the RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link. By default we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't explicitly set it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
* ppc/85xx: Clean up do_resetKumar Gala2009-09-08-16/+9
| | | | | | | | | | | There is no reason to do a run time check for e500 v1 based cores to determine if we have the GUTs RSTCR facility. Only the first generation of PQ3 parts (MPC8540/41/55/60) do not have it. So checking to see if we are e500 v2 would miss future parts (like e500mc). Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().Poonam Aggrwal2009-09-08-0/+4
| | | | | | | While in probecpu() UART is still not initialized. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx/86xx: Device tree fixup for number of coresPoonam Aggrwal2009-09-08-0/+2
| | | | | | | | | | | | | | Fixing the number of cores in the device tree based on the actual number of cores on the system. With this same device tree image can be used for dual core and single core members of otherwise exactly same SOC. For example: * P2020RDB and P2010RDB * P1020RDB and P1011RDB * MPC8641D and MPC8641 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx,86xx: Handling Unknown SOC versionPoonam Aggrwal2009-09-08-7/+3
| | | | | | | | | | | Incase the system is detected with Unknown SVR, let the system boot with a default value and a proper message. Now with dynamic detection of SOC properties from SVR, this is necessary to prevent a crash. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Cleanup makefile and related optional filesKumar Gala2009-09-08-18/+19
| | | | | | | | Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases we have like PCI, CPM2, QE. Also reworked it to use one line per file for everything and sorted in alphabetical order. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix bug in setup_mp codeKumar Gala2009-09-08-3/+29
| | | | | | | | | | | | | | Its possible that we try and copy the boot page code out of flash into a DDR location that doesn't have a TLB cover it. For example, if we have 3G of DDR we typically only map the first 2G. In the cases of 4G+ this wasn't an issue since the reset page TLB mapping covered the last page of memory which we wanted to copy to. We now change the physical address of the reset page TLB to map to the true physical location of the boot page code, copy and than set the TLB back to its 1:1 mapping of the reset page. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Add a simple function to search the TLBKumar Gala2009-09-08-0/+27
| | | | | | | | | | | Allow us to search the TLB array based on an address. This is useful if we want to change an entry but dont know where it happens to be located. For example, the boot page mapping we use on MP or the flash TLB that we change the WIMGE settings for after we've relocated. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for setting IVORs to fixed offset defaultsKumar Gala2009-09-08-0/+95
| | | | | | | | | | | | In future Book-E implementations IVORs will most likely go away and be replaced with fixed offsets. The IVPR will continue to exist to allow for relocation of the interrupt vectors. This code adds support to setup the IVORs as their fixed offset values per the ISA 2.06 spec when we transition from u-boot to another OS either via 'bootm' or a cpu release. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix up eSDHC controller clock frequency in the device treeDipen Dudhat2009-09-08-0/+7
| | | | | Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Remove ddr_pd_cntl register since it doesn't existKumar Gala2009-09-08-1/+0
| | | | | | | | The ddr_pd_cntl isn't defined in any reference manual and thus we wil remove especially since we set it to 0, which would most likely be its POR value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clkDipen Dudhat2009-09-08-1/+1
| | | | | | | | | | Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a platform define. This will enable all the 85xx platforms to use sdhc_clk based on CONFIG_FSL_ESDHC. Signed-off-by: Gao Guanhua <B22826@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Improve MPIC initializationTimur Tabi2009-08-28-5/+7
| | | | | | | | | The MPIC initialization code for Freescale e500 CPUs was not using I/O accessors, and it was not issuing a read-back to the MPIC after setting mixed mode. This may be the cause of a spurious interrupt on some systems. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added single core members of FSL P1xx/P2xx processors seriesPoonam Aggrwal2009-08-28-1/+3
| | | | | | | | P1011 - Single core variant of P1020 P2010 - Single core variant of P2020 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add L2SRAM Register's macro definitionMingkai Hu2009-08-28-2/+3
| | | | | Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Move to a common linker scriptKumar Gala2009-08-28-0/+146
| | | | | | | | There are really no differences between all the 85xx linker scripts so we can just move to a single common one. Board code is still able to override the common one if need be. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added P1020 Processor Support.Poonam Aggrwal2009-08-28-1/+2
| | | | | | | | | | | | | | P1020 is another member of QorIQ series of processors which falls in ULE category. It is an e500 based dual core SOC. Being a scaled down version of P2020 it has following differences: - 533MHz - 800MHz core frequency. - 256Kbyte L2 cache - Ethernet controllers with classification capabilities. Also the SOC is pin compatible with P2020 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xxPoonam Aggrwal2009-08-28-17/+39
| | | | | | | | | | | | | The number of CPUs are getting detected dynamically by checking the processor SVR value. Also removed CONFIG_NUM_CPUS references from all the platforms with 85xx/86xx processors. This can help to use the same u-boot image across the platforms. Also revamped and corrected few Freescale Copyright messages. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-11-20 14:48:34 +0000