summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx
Commit message (Collapse)AuthorAgeLines
* Moved initialization of QE Ethernet controller to cpu_eth_init()Ben Warren2008-11-09-0/+18
| | | | | | Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of FCC Ethernet controller to cpu_eth_initBen Warren2008-11-09-1/+4
| | | | | | | | | | | Affected boards: Several MPC8xx boards Several MPC8260/MPC8272 boards Several MPC85xx boards Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Fix typo in cpu/mpc85xx/cpu.cBen Warren2008-11-09-1/+1
| | | | | | CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* 85xx: Fix the incorrect register used for DDR erratum1Dave Liu2008-10-24-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8572 DDR erratum1: DDR controller may enter an illegal state when operating in 32-bit bus mode with 4-beat bursts. Description: When operating with a 32-bit bus, it is recommended that DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used. This forces the DDR controller to use 4-beat bursts when communicating to the DRAMs. However, an issue exists that could lead to data corruption when the DDR controller is in 32-bit bus mode while using 4-beat bursts. Projected Impact: If the DDR controller is operating in 32-bit bus mode with 4-beat bursts, then the controller may enter into a bad state. All subsequent reads from memory is corrupted. Four-beat bursts with a 32-bit bus only is used with DDR2 memories. Therefore, this erratum does not affect DDR3 mode. Work Arounds: To work around this issue, software must set DEBUG_1[31] in DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1 and CCSRBAR offset + 0x6f00 for DDR_2). Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2 as condition, but it should be DDR_SDRAM_CFG register. Signed-off-by: Dave Liu <daveliu@freescale.com>
* 85xx: Add basic e500mc core supportKumar Gala2008-10-24-0/+14
| | | | | | | | | | | Introduce CONFIG_E500MC to deal with the minor differences between e500v2 and e500mc. * Certain fields of HID0/1 don't exist anymore on e500mc * Cache line size is 64-bytes on e500mc * reset value of PIR is different Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic numberKumar Gala2008-10-24-2/+2
| | | | | | | Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle e500mc's 64-byte cacheline properly when it gets added. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Use strmhz() to format clock frequenciesWolfgang Denk2008-10-21-11/+15
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge 'next' branchWolfgang Denk2008-10-18-156/+221
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 85xx if NUM_CPUS>1, print cpu numberEd Swarthout2008-10-18-0/+5
| | | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
| * Have u-boot pass stashing parameters into device treeAndy Fleming2008-10-18-0/+11
| | | | | | | | | | | | | | | | | | Some cores don't support ethernet stashing at all, and some instances have errata. Adds 3 properties to gianfar nodes which support stashing. For now, just add this support to 85xx SoCs. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * 85xx: Export invalidate_{i,d}cache and add flush_dcacheKumar Gala2008-10-18-0/+49
| | | | | | | | | | | | | | | | Added the ability for C code to invalidate the i/d-cache's and to flush the d-cache. This allows us to more efficient change mappings from cache-able to cache-inhibited. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-156/+156
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Revert "85xx: Using proper I2C source clock divider for MPC8544"Kumar Gala2008-10-17-2/+2
|/ | | | | | | | | | This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159. The fix introduced by this patch is not correct. The problem is that the documentation is not correct for the MPC8544 with regards to which bit in PORDEVSR2 is for the SEC_CFG. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Using proper I2C source clock divider for MPC8544Wolfgang Grandegger2008-10-08-2/+2
| | | | | | | | | Measurements with our MPC8544 board showed that the I2C bus frequency is wrong by a factor of 1.5. Obviously, the interpretation of the MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not correct. There seems to be an error in the 8544 RM. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* Fix the incorrect DDR clk freq reporting on 8536DSJason Jin2008-10-07-2/+4
| | | | | | | | | On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111), The display is still sync mode DDR freq. This patch try to fix this. The display DDR freq is now the actual freq in both sync and async mode. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* 85xx: Remove setting of *cache-line-size in device treesKumar Gala2008-10-07-3/+0
| | | | | | | ePAPR says if the *cache-block-size is the same as *cache-line-size than we don't need the *cache-line-size property. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix printf errors under -DDEBUGAndrew Klossner2008-09-09-7/+7
| | | | | | | | | | | | Fix printf format-string/arg mismatches under -DDEBUG. These warnings occur with DEBUG defined for a platform using cpu/mpc85xx. Users of other architectures can unearth similar problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right after "CFLAGS += $(call cc-option,-fno-stack-protector)". Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* 85xx: Ensure timebase is zero on secondary coresKumar Gala2008-09-09-0/+5
| | | | | | | The e500um says the timebase is volatile out of reset. To ensure TB sync works we need to make sure its zero. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.Sergei Poselenov2008-09-08-8/+7
| | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* Pass in tsec_info struct through tsec_initializeAndy Fleming2008-09-02-23/+10
| | | | | | | | | | | | | The tsec driver contains a hard-coded array of configuration information for the tsec ethernet controllers. We create a default function that works for most tsecs, and allow that to be overridden by board code. It creates an array of tsec_info structures, which are then parsed by the corresponding driver instance to determine configuration. Also, add regs, miiregs, and devname fields to the tsec_info structure, so that we don't need the kludgy "index" parameter. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* mpc85xx: remove redudant code with lib_ppc/interrupts.cKumar Gala2008-08-27-97/+12
| | | | | | | | | | For some reason we duplicated the majority of code in lib_ppc/interrupts.c not show how that happened, but there is no good reason for it. Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why they exist. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc85xx: Add support for the MPC8536Kumar Gala2008-08-27-1/+199
| | | | | | | | | | | The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc85xx: Add support for the MPC8572DS reference boardKumar Gala2008-08-27-2/+2
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Remove old SPD support from cpu/mpc85xxKumar Gala2008-08-27-1166/+0
| | | | | | | All 85xx boards have been converted to the new code so we can remove the old SPD DDR setup code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Add 85xx specific register settingKumar Gala2008-08-27-0/+318
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Add e500 TLB helper for DDR codeKumar Gala2008-08-27-0/+64
| | | | | | | Provide a helper function that board code can call to map TLBs when setting up DDR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.Kumar Gala2008-08-27-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The main purpose of this rewrite it to be able to share the same initialization code on all FSL PowerPC products that have DDR controllers. (83xx, 85xx, 86xx). The code is broken up into the following steps: GET_SPD COMPUTE_DIMM_PARMS COMPUTE_COMMON_PARMS GATHER_OPTS ASSIGN_ADDRESSES COMPUTE_REGS PROGRAM_REGS This allows us to share more code an easily allow for board specific code overrides. Additionally this code base adds support for >4G of DDR and provides a foundation for supporting interleaving on processors with more than one controller. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fdt: rework fdt_fixup_ethernet() to use env instead of bd_tKumar Gala2008-08-21-1/+1
| | | | | | | | | | Move to using the environment variables 'ethaddr', 'eth1addr', etc.. instead of bd->bi_enetaddr, bi_enet1addr, etc. This makes the code a bit more flexible to the number of ethernet interfaces. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUSKumar Gala2008-08-12-3/+3
| | | | | | | Use CONFIG_NUM_CPUS to match existing define used by 86xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2008-07-15-23/+42
|\
| * 85xx: Cleanup L2 cache size detectionKumar Gala2008-07-14-17/+30
| | | | | | | | | | | | | | | | | | | | The L2 size detection code was a bit confusing and we kept having to add code to it to handle new processors. Change the sense of detection so we look for the older processors that aren't changing. Also added support for 1M cache size on 8572. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreqPaul Gortmaker2008-07-14-1/+1
| | | | | | | | | | | | | | | | | | | | Some boards that have external 16550 UARTs don't have a direct tie between bi_busfreq and the clock used for the UARTs. Boards that do have such a tie should set CFG_NS16550_CLK to be get_bus_freq(0) -- which most of them do already. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
| * Change the temp map to ROM to align addresses to page size.Andrew Klossner2008-07-14-4/+5
| | | | | | | | | | | | | | | | | | | | With a page size of BOOKE_PAGESZ_16M, both the real and effective addresses must be multiples of 16MB. The hardware silently truncates them so the code happens to work. This patch clarifies the situation by establishing addresses that the hardware doesn't need to truncate. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * mpc85xx: use IS_E_PROCESSOR macroKim Phillips2008-07-14-1/+1
| | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * fdt: add crypto node handling for MPC8{3, 5}xxE processorsKim Phillips2008-07-14-0/+5
| | | | | | | | | | | | | | | | Delete the crypto node if not on an E-processor. If on 8360 or 834x family, check rev and up-rev crypto node (to SEC rev. 2.4 property values) if on an 'EA' processor, e.g. MPC8349EA. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Fix some more printf() format problems.Kumar Gala2008-07-14-2/+2
|/ | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix printf errors.Andrew Klossner2008-07-09-4/+4
| | | | | | | | | | | | The compiler will help find mismatches between printf formats and arguments if you let it. This patch adds the necessary attributes to declarations in include/common.h, then begins to correct the resulting compiler warnings. Some of these were bugs, e.g., "$d" instead of "%d" and incorrect arguments. Others were just annoying, like int-long mismatches on a system where both are 32 bits. It's worth fixing the annoying errors to catch the real ones. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk2008-07-09-0/+30
|\
| * Add mechanisms for CPU and board-specific Ethernet initializationBen Warren2008-07-06-0/+30
| | | | | | | | | | | | | | | | This patch is the first step in cleaning up net/eth.c, by moving Ethernet initialization to CPU or board-specific code. Initial implementation is only on the Freescale TSEC controller, but others will be added soon. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Coding Style CleanupWolfgang Denk2008-06-28-1/+1
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix 4xx build issueAnatolij Gustschin2008-06-19-1/+1
| | | | | | | | | | | | | | Building for 4xx doesn't work since commit 4dbdb768: In file included from 4xx_pcie.c:28: include/asm/processor.h:971: error: expected ')' before 'ver' make[1]: *** [4xx_pcie.o] Error 1 This patch fixes the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx/86xx: Move to dynamic mgmt of LAWsKumar Gala2008-06-11-1/+1
| | | | | | | | | | | With the new LAW interface (set_next_law) we can move to letting the system allocate which LAWs are used for what purpose. This makes life a bit easier going forward with the new DDR code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Acked-by: Becky Bruce <becky.bruce@freescale.com>
* FSL LAW: Keep track of LAW allocationsKumar Gala2008-06-11-17/+6
| | | | | | | | | | | | | | | Make it so we keep track of which LAWs have allocated and provide a function (set_next_law) which can allocate a LAW for us if one is free. In the future we will move to doing more "dynamic" LAW allocation since the majority of users dont really care about what LAW number they are at. Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Added the upmconfig() function for 85xx.Sergei Poselenov2008-06-11-0/+66
| | | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* MPC85xx: Beautify boot output of L2 cache configurationWolfgang Grandegger2008-06-10-9/+11
| | | | | | | | | | The boot output is now aligned poperly with other boot output lines, e.g.: FLASH: 128 MB L2: 512 KB enabled Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* 85xx: Add setting of cache props in the device tree.Kumar Gala2008-06-10-0/+128
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: expose cpu identificationKumar Gala2008-06-10-36/+40
| | | | | | | | | | | | | The current cpu identification code is used just to return the name of the processor at boot. There are some other locations that the name is useful (device tree setup). Expose the functionality to other bits of code. Also, drop the 'E' suffix and add it on by looking at the SVR version when we print this out. This is mainly to allow the most flexible use of the name. The device tree code tends to not care about the 'E' suffix. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define itKumar Gala2008-06-09-2/+6
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* MPC85xx: Change traps.c to not reference non-addressable memoryBecky Bruce2008-06-09-3/+5
| | | | | | | | | | | Currently, END_OF_RAM is used by the trap code to determine if we should attempt to access the stack pointer or not. However, on systems with a lot of RAM, only a subset of the RAM is guaranteed to be mapped in and accessible. Change END_OF_RAM to use get_effective_memsize() instead of using the raw ram size out of the bd. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* Merge branch 'socrates' of /home/wd/git/u-boot/projectsWolfgang Denk2008-05-21-9/+14
|\
generated by cgit v1.1 at 2024-12-21 14:15:32 +0000