summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx
Commit message (Collapse)AuthorAgeLines
* fsl_dma: Break out common memory initialization functionPeter Tyser2009-07-01-25/+1
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Move dma_init() call to common codePeter Tyser2009-07-01-3/+3
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl_dma: Move dma function prototypes to common header filePeter Tyser2009-07-01-4/+0
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Rename dma_xfer() to dmacpy()Peter Tyser2009-07-01-15/+14
| | | | | | | | Also update dmacpy()'s argument order to match memcpy's and use phys_addr_t/phy_size_t for address/size arguments Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Break out DMA code to a common filePeter Tyser2009-07-01-47/+0
| | | | | | | | DMA support is now enabled via the CONFIG_FSL_DMA define instead of the previous CONFIG_DDR_ECC Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl/85xx, 86xx: Sync up DMA codePeter Tyser2009-06-12-4/+4
| | | | | | | | | | | | | | | | | | | | | The following changes were made to sync up the DMA code between the 85xx and 86xx architectures which will make it easier to break out common 8xxx DMA code: 85xx: - Don't set STRANSINT and SPCIORDER fields in SATR register. These bits only have an affect when the SBPATMU bit is set. - Write 0xffffffff instead of 0xfffffff to clear errors in the DMA status register. We may as well clear all 32 bits of the register... 86xx: - Add CONFIG_SYS_MPC86xx_DMA_ADDR define to address DMA registers - Add clearing of errors in the DMA status register when initializing the controller - Clear the channel start bit in the DMA mode register after a transfer Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl: Create common fsl_dma.h for 85xx and 86xx cpusPeter Tyser2009-06-12-14/+17
| | | | | | | | Break out DMA structures for the Freescale MPC85xx and MPC86xx cpus to reduce a large amount of code duplication Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* qe: Pass in uec_info struct through uec_initializeHaiying Wang2009-06-12-17/+4
| | | | | | | | | | | The uec driver contains code to hard code configuration information for the uec ethernet controllers. This patch creates an array of uec_info structures, which are then parsed by the corresponding driver instance to determine configuration. It also creates function uec_standard_init() to initialize all UEC interfaces for 83xx and 85xx. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add QE clk supportHaiying Wang2009-06-12-1/+18
| | | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added MPC8535/E identifiersKumar Gala2009-06-12-0/+2
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Always attempt ethernet device tree fixupKumar Gala2009-06-12-3/+0
| | | | | | | | | | | Its reasonable that we may have ethernet devices but dont have drivers or support enabled for them in u-boot and want the device tree fixed up. Unconditionally calling the ethernet fixup is fine since if we dont have ethernet nodes that match (or aliases) we will not attempt to do anything. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Timur Tabi <timur@freescale.com>
* 85xx: Use print_size to report amount of memory not mapped by TLBsKumar Gala2009-06-12-1/+1
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: bugfix for reading maximum TLB size on mpc85xxFredrik Arnerup2009-06-09-1/+1
| | | | | | | | | | | | | The MAXSIZE field in the TLB1CFG register is 4 bits, not 8 bits. This made setup_ddr_tlbs() try to set up a TLB larger than the e500 maximum (256 MB) which made u-boot hang in board_init_f() when trying to create a new stack in RAM. I have an mpc8540 with one 1GB dimm. Signed-off-by: Fredrik Arnerup <fredrik.arnerup@edgeware.tv> Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Introduce determine_mp_bootpg() helper.Kumar Gala2009-04-01-23/+16
| | | | | | | | | | | | Match determine_mp_bootpg() that was added for 86xx. We need this to address a bug introduced in v2009.03 with 86xx MP booting. We have to make sure to reserve the region of memory used for the MP bootpg() so other u-boot code doesn't use it. Also added a comment about how cpu_reset() is dealing w/an errata on early 85xx MP HW. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* MPC85xx: Add MPC8569 CPU supportHaiying Wang2009-03-30-0/+52
| | | | | | | | | There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage, then invalidate it after LBCR bit 13 is set. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for additional e500mc featuresKumar Gala2009-03-30-1/+94
| | | | | | | * Enable backside L2 * e500mc no longer has timebase enable in HID (moved to CCSR register) Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl-ddr: add the DDR3 SPD infrastructureDave Liu2009-03-30-2/+4
| | | | | | | | | - support mirrored DIMMs, not support register DIMMs - test passed on P2020DS board with MT9JSF12872AY-1G1D1 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
* Fix mpc85xx ddr-gen3 ddr_sdram_cfg.Ed Swarthout2009-03-09-2/+2
| | | | | | | Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
* Coding style cleanup, update CHANGELOGWolfgang Denk2009-02-19-1/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* 85xx: Add eSDHC support for 8536 DSAndy Fleming2009-02-16-0/+15
| | | | Signed-off-by: Andy Fleming <afleming@freescale.com>
* 32bit BUg fix for DDR2 on 8572Poonam_Aggrwal-b108122009-02-16-1/+8
| | | | | | | This errata fix is required for 32 bit DDR2 controller on 8572. May also be required for P10XX20XX platforms Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
* mpc85xx: Add support for the P2020Srikanth Srinivasan2009-02-16-0/+3
| | | | | | | | | | | Added various p2020 processor specific details: * SVR for p2020, p2020E * immap updates for LAWs and DDR on p2020 * LAW defines related to p2020 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Fix how we map DDR memoryKumar Gala2009-02-16-47/+27
| | | | | | | | | Previously we only allowed power-of-two memory sizes and didnt handle >2G of memory. Now we will map up to CONFIG_MAX_MEM_MAPPED and should properly handle any size that we can make in the TLBs we have available to us Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Format cpu freq printing to handle 8 coresKumar Gala2009-02-16-3/+5
| | | | | | | Only print 4 cpu freq per line. This way when we have 8 cores its a bit more readable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Add secondary CPUs processor frequency for e500 coreHaiying Wang2009-01-23-8/+24
| | | | | | | | | This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS, and prints each CPU's frequency separately. It also fixes up each CPU's frequency in "clock-frequency" of fdt blob. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boardsKumar Gala2009-01-23-4/+12
| | | | | | | Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead of _IO_BASE so we are more explicit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boardsKumar Gala2009-01-23-4/+12
| | | | | | | | Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead of _MEM_BASE so we are more explicit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* Change DDR tlb start entry to CONFIG param for 85xxHaiying Wang2009-01-13-1/+5
| | | | | | | So that we can locate the DDR tlb start entry to the value other than 8. By default, it is still 8. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* mpc8[56]xx: Put localbus clock in sysinfo and gdTrent Piepho2008-12-19-26/+32
| | | | | | | | | | | | | | | | | | | | | | | Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* mpc8568: Double local bus clock dividerTrent Piepho2008-12-19-2/+2
| | | | | | | | | | | | | The clock divider for the MPC8568 local bus should be doubled, like the other newer MPC85xx chips. Since there are now more chips with a 2x divider than a 1x, and any new 85xx chips will probably be 2x, invert the sense of the #if so that it lists the 1x chips instead of the 2x ones. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Fix the boot window issueDave Liu2008-12-19-8/+8
| | | | | | | | | | | | | | | | | | | | | | If one custom board is using the 8MB flash, it is set as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000. The current start.S code will be broken at switch_as. It is because the TLB1[15] is set as 16MB page size, EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000. For the 8MB flash case, the EPN = 0xefxxxxxx, RPN = 0xffxxxxxx. Assume the virt address of switch_as is 0xef7ff18c, the real address of the instruction at switch_as should be 0xff7ff18c. the 0xff7ff18c is out of the range of the default 8MB boot LAW window 0xff800000 - 0xffffffff. So when we switch to AS1 address space at switch_as, the core can't fetch the instruction at switch_as any more. It will cause broken issue. Signed-off-by: Dave Liu <daveliu@freescale.com>
* Set IVPR to kenrel entry point in second core boot pageHaiying Wang2008-12-19-0/+1
| | | | | | | | | | | Assuming the OSes exception vectors start from the base of kernel address, and the kernel physical starting address can be relocated to an non-zero address. This patch enables the second core to have a valid IVPR for debugger before kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid value for second core which runs kernel at different physical address other than 0x0. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* mpc8xxx: LCRR[CLKDIV] is sometimes five bitsTrent Piepho2008-12-19-1/+1
| | | | | | | | | | | | | | On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits instead of four. In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It should be safe as the fifth bit was defined as reserved and set to 0. Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* mpc8[56]xx: Put localbus clock in device treeTrent Piepho2008-12-19-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Export the localbus frequency in the device tree, the same way the CPU, TB, CCB, and various other frequencies are exported in their respective device tree nodes. Some localbus devices need this information to be programed correctly, so it makes sense to export it along with the other frequencies. Unfortunately, when someone wrote the localbus dts bindings, they didn't bother to define what the "compatible" property should be. So it seems no one was quite sure what to put in their dts files. Based on current existing dts files in the kernel source, I've used "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all of the 85xx devices, and are looked for by the Linux code. The eLBC is apparently not entirely backward compatible with the pq3 LBC and so eLBC equipped platforms like 8572 won't use pq3-localbus. For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems and is also looked for by the Linux code. On MPC8641, I've also used "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of which don't use "fsl,elbc" or any other acceptable name to match on. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Add support to populate addr map based on TLB settingsKumar Gala2008-12-19-0/+34
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Update U-Boot's build timestamp on every compilePeter Tyser2008-12-06-1/+2
| | | | | | | Use the GNU 'date' command to auto-generate a new U-Boot timestamp on every compile. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* 85xx: init gd as early as possibleKumar Gala2008-12-04-6/+6
| | | | | | | | Moved up the initialization of GD so C code like set_tlb() can use gd->flags to determine if we've relocated or not in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* 85xx: Fix relocation of CCSRBARKumar Gala2008-12-04-4/+5
| | | | | | | | | | If the virtual address for CCSRBAR is the same after relocation but the physical address is changing we'd end up having two TLB entries with the same VA. Instead we new us the new CCSRBAR virt address + 4k as a temp virt address to access the old CCSRBAR to relocate it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* 85xx: Add PORDEVSR_PCI1 definePeter Tyser2008-12-04-1/+1
| | | | | | | | | Add define used to determine if PCI1 interface is in PCI or PCIX mode. Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* 85xx: Add CPU 2 errata workaround to all 8548 boardsPeter Tyser2008-12-03-0/+13
| | | | | | | | | | | All mpc8548-based boards should implement the suggested workaround to CPU 2 errata. Without the workaround, its possible for the 8548's core to hang while executing a msync or mbar 0 instruction and a snoopable transaction from an I/O master tagged to make quick forward progress is present. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Moved initialization of QE Ethernet controller to cpu_eth_init()Ben Warren2008-11-09-0/+18
| | | | | | Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of FCC Ethernet controller to cpu_eth_initBen Warren2008-11-09-1/+4
| | | | | | | | | | | Affected boards: Several MPC8xx boards Several MPC8260/MPC8272 boards Several MPC85xx boards Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Fix typo in cpu/mpc85xx/cpu.cBen Warren2008-11-09-1/+1
| | | | | | CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* 85xx: Fix the incorrect register used for DDR erratum1Dave Liu2008-10-24-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8572 DDR erratum1: DDR controller may enter an illegal state when operating in 32-bit bus mode with 4-beat bursts. Description: When operating with a 32-bit bus, it is recommended that DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used. This forces the DDR controller to use 4-beat bursts when communicating to the DRAMs. However, an issue exists that could lead to data corruption when the DDR controller is in 32-bit bus mode while using 4-beat bursts. Projected Impact: If the DDR controller is operating in 32-bit bus mode with 4-beat bursts, then the controller may enter into a bad state. All subsequent reads from memory is corrupted. Four-beat bursts with a 32-bit bus only is used with DDR2 memories. Therefore, this erratum does not affect DDR3 mode. Work Arounds: To work around this issue, software must set DEBUG_1[31] in DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1 and CCSRBAR offset + 0x6f00 for DDR_2). Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2 as condition, but it should be DDR_SDRAM_CFG register. Signed-off-by: Dave Liu <daveliu@freescale.com>
* 85xx: Add basic e500mc core supportKumar Gala2008-10-24-0/+14
| | | | | | | | | | | Introduce CONFIG_E500MC to deal with the minor differences between e500v2 and e500mc. * Certain fields of HID0/1 don't exist anymore on e500mc * Cache line size is 64-bytes on e500mc * reset value of PIR is different Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic numberKumar Gala2008-10-24-2/+2
| | | | | | | Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle e500mc's 64-byte cacheline properly when it gets added. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Use strmhz() to format clock frequenciesWolfgang Denk2008-10-21-11/+15
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge 'next' branchWolfgang Denk2008-10-18-156/+221
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 85xx if NUM_CPUS>1, print cpu numberEd Swarthout2008-10-18-0/+5
| | | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
| * Have u-boot pass stashing parameters into device treeAndy Fleming2008-10-18-0/+11
| | | | | | | | | | | | | | | | | | Some cores don't support ethernet stashing at all, and some instances have errata. Adds 3 properties to gianfar nodes which support stashing. For now, just add this support to 85xx SoCs. Signed-off-by: Andy Fleming <afleming@freescale.com>
generated by cgit v1.1 at 2024-11-18 17:54:19 +0000