summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx/cpu_init.c
Commit message (Collapse)AuthorAgeLines
* ppc/85xx: Add tracking of TLB CAM usageKumar Gala2010-01-05-0/+1
| | | | | | | | | We need to track which TLB CAM entries are used to allow us to "dynamically" allocate entries later in the code. For example the SPD DDR code today hard codes which TLB entries it uses. We can now make that pick entries that are free. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for e500mc cache stashingKumar Gala2010-01-05-0/+5
| | | | | | | | | | | | | | The e500mc core supports the ability to stash into the L1 or L2 cache, however we need to uniquely identify the caches with an id. We use the following equation to set the various stash-ids: 32 + coreID*2 + 0(L1) or 1(L2) The 0 (for L1) or 1 (for L2) matches the CT field used be various cache control instructions. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Make L2 support more robustDave Liu2009-10-26-1/+4
| | | | | | | According the user manual, we need loop-check the L2 enable bit set. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: Handle timebase enabling and frequency reportingKumar Gala2009-09-24-0/+17
| | | | | | | | | On CoreNet style platforms the timebase frequency is the bus frequency defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms the core not longer controls the enabling of the timebase. We now need to enable the boot core's timebase via CCSR register writes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix enabling of L2 cacheKumar Gala2009-09-24-2/+2
| | | | | | | We need to flash invalidate the locks in addition to the cache before we enable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Disable all async interrupt sources when we bootKumar Gala2009-09-15-0/+11
| | | | | | | | We should make sure to clear MSR[ME, CE, DE] when we boot an OS image since we have changed the exception vectors and the OSes vectors might not be setup we should avoid async interrupts at all costs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Split out cpu_init_early into its own file for NAND_SPLKumar Gala2009-09-15-51/+0
| | | | | | | By pulling out cpu_init_early we can build just it and not all of cpu_init for NAND_SPL. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Change cpu_init_early_f so we can use with NAND SPLKumar Gala2009-09-15-9/+25
| | | | | | | Use write_tlb and don't use memset so we can use the same code for cpu_init_early_f between NAND SPL and not. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add boot from NAND/eSDHC/eSPI supportMingkai Hu2009-09-15-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM. For all three bootup methods, the bootup process can be divided into two stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line. When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NAND loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it. The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for setting IVORs to fixed offset defaultsKumar Gala2009-09-08-0/+7
| | | | | | | | | | | | In future Book-E implementations IVORs will most likely go away and be replaced with fixed offsets. The IVPR will continue to exist to allow for relocation of the interrupt vectors. This code adds support to setup the IVORs as their fixed offset values per the ISA 2.06 spec when we transition from u-boot to another OS either via 'bootm' or a cpu release. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add L2SRAM Register's macro definitionMingkai Hu2009-08-28-2/+3
| | | | | Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8xxx: Move dma_init() call to common codePeter Tyser2009-07-01-1/+3
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for additional e500mc featuresKumar Gala2009-03-30-0/+13
| | | | | | | * Enable backside L2 * e500mc no longer has timebase enable in HID (moved to CCSR register) Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: init gd as early as possibleKumar Gala2008-12-04-6/+6
| | | | | | | | Moved up the initialization of GD so C code like set_tlb() can use gd->flags to determine if we've relocated or not in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* 85xx: Fix relocation of CCSRBARKumar Gala2008-12-04-4/+5
| | | | | | | | | | If the virtual address for CCSRBAR is the same after relocation but the physical address is changing we'd end up having two TLB entries with the same VA. Instead we new us the new CCSRBAR virt address + 4k as a temp virt address to access the old CCSRBAR to relocate it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* 85xx: Add CPU 2 errata workaround to all 8548 boardsPeter Tyser2008-12-03-0/+13
| | | | | | | | | | | All mpc8548-based boards should implement the suggested workaround to CPU 2 errata. Without the workaround, its possible for the 8548's core to hang while executing a msync or mbar 0 instruction and a snoopable transaction from an I/O master tagged to make quick forward progress is present. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-44/+44
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* mpc85xx: Add support for the MPC8536Kumar Gala2008-08-27-0/+7
| | | | | | | | | | | The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
* 85xx: Cleanup L2 cache size detectionKumar Gala2008-07-14-17/+30
| | | | | | | | | | The L2 size detection code was a bit confusing and we kept having to add code to it to handle new processors. Change the sense of detection so we look for the older processors that aren't changing. Also added support for 1M cache size on 8572. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL LAW: Keep track of LAW allocationsKumar Gala2008-06-11-17/+6
| | | | | | | | | | | | | | | Make it so we keep track of which LAWs have allocated and provide a function (set_next_law) which can allocate a LAW for us if one is free. In the future we will move to doing more "dynamic" LAW allocation since the majority of users dont really care about what LAW number they are at. Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
* MPC85xx: Beautify boot output of L2 cache configurationWolfgang Grandegger2008-06-10-8/+10
| | | | | | | | | | The boot output is now aligned poperly with other boot output lines, e.g.: FLASH: 128 MB L2: 512 KB enabled Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* 85xx: Use SVR_SOC_VER instead of SVR_VERKumar Gala2008-04-11-1/+1
| | | | | | | | The recent change introduced by 'Update SVR numbers to expand support' now requires that we use SVR_SOC_VER instead of SVR_VER if we want to compare against a particular processor id. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added support for multicore boot mechanismKumar Gala2008-03-26-0/+4
| | | | | | | | | Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add the concept of CFG_CCSRBAR_PHYSKumar Gala2008-03-26-3/+3
| | | | | | | | | When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Get ride of old TLB setup codeKumar Gala2008-01-17-20/+0
| | | | | | | Now that all boards have been converted, remove old config code and the config option for the new style. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Reworked initial processor initKumar Gala2008-01-17-4/+52
| | | | | | | | | | | | | | | | | | | Reworked the initial processor initialzation sequence: * introduced cpu_early_init_f that is run in address space 1 (AS=1) * Moved TLB/LAW and CCSR init into cpu_early_init_f() * Reworked initial asm code to do most of the core init before TLBs The main reasons for these changes are to allow handling of 36-bit phys addresses in the future and some of the issues that will exist when we do that. There are a few caveats on what can be initialized via the LAW and TLB static tables: * TLB entry 14/15 can't be initialized via the TLB table * any LAW that covers the implicit boot window (4G-8M to 4G) must map to the code that is currently executing. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Move LAW init code into CKumar Gala2008-01-16-0/+8
| | | | | | | | | | | Move the initialization of the LAWs into C code and provide an API to allow modification of LAWs after init. Board code is responsible to provide a law_table and num_law_entries. We should be able to use the same code on 86xx as well. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Stop using immap_t on 85xxKumar Gala2007-12-11-7/+3
| | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_*_ADDR as the base of the registers instead of getting it via &immap. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Stop using immap_t for cpm offset on 85xxKumar Gala2007-12-11-3/+3
| | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers instead of getting it via &immap->im_cpm. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Enable L2 cache for MPC8568MDS boardHaiying Wang2007-08-29-1/+1
| | | | | | The L2 cache size is 512KB for 8568, print out the correct informaiton. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* Add support for UEC to 8568Andy Fleming2007-08-14-0/+33
| | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Fix minor 85xx warningsAndy Fleming2007-08-14-1/+3
| | | | | | | | | | | Some patches had inserted warnings into the build: * mpc8560ads declared data without using it * cpu_init declared ecm and immap without using it in all CONFIGs * MPC8548CDS.h had its default filenames changed so that they contained "\m" in the paths. Made the defaults not Windows-specific (or anything-specific) Signed-off-by: Andy Fleming <afleming@freescale.com>
* mpc85xx L2 cache reporting and SRAM relocation option.Ed Swarthout2007-08-14-18/+47
| | | | | | | | Allow debugger to override flash cs0/cs1 settings to enable alternate boot regions Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* Add support for the 8568 MDS boardAndy Fleming2007-05-02-2/+0
| | | | | | | | | This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
* * Add Flat Dev Tree construction for MPC85xx ADS and CDS boardsMatthew McClintock2006-06-28-0/+1
| | | | | | Patch by Jon Loeliger 17-Jan-2006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
* GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk2006-03-31-1/+2
|
* * Patch by Jon Loeliger, 2005-05-05Jon Loeliger2005-07-25-13/+29
| | | | | | | | Implemented support for MPC8548CDS board. Added DDR II support based on SPD values for MPC85xx boards. This roll-up patch also includes bugfies for the previously published patches: DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
* * Patch by Jon Loeliger 2005-02-08Jon Loeliger2005-07-25-1/+16
| | | | Determine L2 Cache size dynamically on 85XX boards.
* * Patch by Jon Loeliger, Kumar Gala 2005-02-08Jon Loeliger2005-07-23-3/+3
| | | | | | | | - Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
* Update code for TQM8540 board (and 85xx in general):wdenk2005-03-15-2/+2
| | | | | | | - Change the name of the Ethernet driver: MOTO ENET -> ENET - Reformat boot messages - Enable redundant environment - Replace the -O2 optimization flag with -mno-string
* * Patches by Xianghua Xiao, 15 Oct 2003:wdenk2003-10-15-0/+205
- Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
generated by cgit v1.1 at 2024-10-16 12:17:15 +0000