summaryrefslogtreecommitdiff
path: root/cpu/mpc8260
Commit message (Collapse)AuthorAgeLines
* mpc8260: move FDT memory node fixup into common CPU code.Marcel Ziswiler2009-11-22-0/+1
| | | | | Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Tested-by: Heiko Schocher <hs@denx.de>
* relocation: Do not relocate NULL pointers.Joakim Tjernlund2009-10-08-2/+4
| | | | | | | | | | NULL is an absolute value and should not be relocated. After this correction code like: void weak_fun(void) __attribute__((weak)); printf("weak_fun:%p\n", weak_fun); will still print null after relocation. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* ppc: Enable full relocation to RAMPeter Tyser2009-10-03-1/+0
| | | | | | | | | | | | | The following changes allow U-Boot to fully relocate from flash to RAM: - Remove linker scripts' .fixup sections from the .text section - Add -mrelocatable to PLATFORM_RELFLAGS for all boards - Define CONFIG_RELOC_FIXUP_WORKS for all boards Previously, U-Boot would partially relocate, but statically initialized pointers needed to be manually relocated. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* i2c: Create common default i2c_[set|get]_bus_speed() functionsPeter Tyser2009-06-12-13/+0
| | | | | | | | | | | | | New default, weak i2c_get_bus_speed() and i2c_set_bus_speed() functions replace a number of architecture-specific implementations. Also, providing default functions will allow all boards to enable CONFIG_I2C_CMD_TREE. This was previously not possible since the tree-form of the i2c command provides the ability to display and modify the i2c bus speed which requires i2c_[set|get]_bus_speed() to be present. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE valuePeter Tyser2009-06-12-3/+0
| | | | | | | | Many boards/controllers/drivers don't support an I2C slave interface, however CONFIG_SYS_I2C_SLAVE is used in common code so provide a default Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* MPC8260: fixup device tree by property instead of pathWolfgang Denk2009-05-15-5/+6
| | | | | | | | | | | | | | | | | | | | cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the clock frequencies in the device tree, using a CPU path "/cpus/OF_CPU", with OF_CPU beind defined in the board config file. However, this does not work when one board config file (here: MPC8260ADS.h) is intended to be used for several diffrent CPUs and therefor contains a generic definition like "cpu@0", as the device trees that will then be loaded will contain specific names like "PowerPC,8272@0". We switch to using do_fixup_by_prop_u32() instead, so we can search for device_type="cpu", as it is done in other architectures, too. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de>
* mpc8260: Fill in brg's clock-frequency in device tree.Scott Wood2009-04-04-0/+3
| | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* PQ2FADS: Enable PCI.Scott Wood2009-04-04-0/+2
| | | | | | PCI on PQ2FADS is very similar to PCI on MPC8272ADS. Signed-off-by: Scott Wood <scottwood@freescale.com>
* Fix all linker script to handle all rodata sectionsTrent Piepho2009-03-20-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent gcc added a new unaligned rodata section called '.rodata.str1.1', which needs to be added the the linker script. Instead of just adding this one section, we use a wildcard ".rodata*" to get all rodata linker section gcc has now and might add in the future. However, '*(.rodata*)' by itself will result in sub-optimal section ordering. The sections will be sorted by object file, which causes extra padding between the unaligned rodata.str.1.1 of one object file and the aligned rodata of the next object file. This is easy to fix by using the SORT_BY_ALIGNMENT command. This patch has not be tested one most of the boards modified. Some boards have a linker script that looks something like this: *(.text) . = ALIGN(16); *(.rodata) *(.rodata.str1.4) *(.eh_frame) I change this to: *(.text) . = ALIGN(16); *(.eh_frame) *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) This means the start of rodata will no longer be 16 bytes aligned. However, the boundary between text and rodata/eh_frame is still aligned to 16 bytes, which is what I think the real purpose of the ALIGN call is. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
* cpu/: get mac address from environmentMike Frysinger2009-03-20-4/+4
| | | | | | | | | | | | | | | | | | | The environment is the canonical storage location of the mac address, so we're killing off the global data location and moving everything to querying the env directly. The cpus that get converted here: at91rm9200 mpc512x mpc5xxx mpc8260 mpc8xx ppc4xx Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Ben Warren <biggerbadderben@gmail.com> CC: John Rigby <jrigby@freescale.com> CC: Stefan Roese <sr@denx.de>
* Fix MPC8260 with ethernet on SCCksi@koi8.net2009-02-09-1/+1
| | | | | | | | This fixes MPC8260 compilation with ethernet on SCC. Probably was a typo or something... Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* 82xx serial, smc: Coding-Style cleanup serial SMC driverHeiko Schocher2009-02-10-36/+18
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* 82xx serial, smc: add configurable SMC Rx buffer lenHeiko Schocher2009-02-10-37/+60
| | | | | | | | | | | | | | This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN. With this option it is possible to allow the receive buffer for the SMC on 82xx to be greater then 1. In case CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the old version. When defining CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE must be defined to setup the maximum idle timeout for the SMC. Signed-off-by: Heiko Schocher <hs@denx.de>
* pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarityKumar Gala2009-02-07-2/+2
| | | | | | | | | | The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and can be confusing when reading the code. Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used for system memory mapping purposes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-02-01-12/+49
|\
| * mgcoge make ether_scc.c work with CONFIG_NET_MULTIGary Jennejohn2009-01-24-12/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is needed for mgcoge because it uses two ethernet drivers. Add a check for the presence of the PIGGY board on mgcoge. Without this board networking cannot work and the initialization must be aborted. Only allocate rtx once to prevent DPRAM exhaustion. Initialize ether_scc.c and the keymile-specific HDLC driver (to be added soon) in eth.c. Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Standardize command usage messages with cmd_usage()Peter Tyser2009-01-28-2/+2
|/ | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functionsTimur Tabi2008-12-15-16/+0
| | | | | | | | | | All implementations of the functions i2c_reg_read() and i2c_reg_write() are identical. We can save space and simplify the code by converting these functions into inlines and putting them in i2c.h. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Section name should be ".data", not "data"Trent Piepho2008-12-09-1/+1
| | | | | Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Update U-Boot's build timestamp on every compilePeter Tyser2008-12-06-1/+2
| | | | | | | Use the GNU 'date' command to auto-generate a new U-Boot timestamp on every compile. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Align end of bss by 4 bytesSelvamuthukumar2008-11-18-0/+1
| | | | | | | | | | Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Moved initialization of FCC Ethernet controller to cpu_eth_initBen Warren2008-11-09-0/+13
| | | | | | | | | | | Affected boards: Several MPC8xx boards Several MPC8260/MPC8272 boards Several MPC85xx boards Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-257/+257
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* I2C: adding new "i2c bus" Command to the I2C Subsystem.Heiko Schocher2008-10-18-1/+14
| | | | | | | With this Command it is possible to add new I2C Busses, which are behind 1 .. n I2C Muxes. Details see README. Signed-off-by: Heiko Schocher <hs@denx.de>
* i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.Heiko Schocher2008-10-18-0/+36
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* fdt: rework fdt_fixup_ethernet() to use env instead of bd_tKumar Gala2008-08-21-1/+1
| | | | | | | | | | Move to using the environment variables 'ethaddr', 'eth1addr', etc.. instead of bd->bi_enetaddr, bi_enet1addr, etc. This makes the code a bit more flexible to the number of ethernet interfaces. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'Wolfgang Denk2008-08-12-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCIMatvejchikov Ilya2008-07-31-20/+27
| | | | Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
* FDT memory and pci node fixes for MPC8260ADSMatvejchikov Ilya2008-07-09-0/+12
| | | | Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
* mpc8260: add fdt_fixup_ethernet supportEsben Haabendal2008-07-01-0/+5
| | | | | | | Add support for updating mac-address and local-mac-address in fdt for all MPC8260 targets. Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
* Big white-space cleanup.Wolfgang Denk2008-05-21-11/+11
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Remove all the search paths from the .lds files.Jason Wessel2008-04-17-1/+0
| | | | | | | The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
* [new uImage] Pull in libfdt if CONFIG_FIT is enabledMarian Balakowicz2008-02-21-1/+1
| | | | | | | | | | | New uImage format (Flattened Image Tree) requires libfdt functionality, print out error message if CONFIG_OF_LIBFDT is not defined. New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). This commit turns it on by default. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* PPC: Use r2 instead of r29 as global data pointerWolfgang Denk2008-02-14-1/+1
| | | | | | | | | | | | R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-12-1/+1
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Added support for the mgcoge board from keymile.Heiko Schocher2008-01-12-4/+5
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* Move do_fixup* for libfdt into common codeKumar Gala2007-11-21-26/+4
| | | | | | | | | | Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 into common/fdt_support.c and renamed: do_fixup() -> do_fixup_by_path() do_fixup_u32() -> do_fixup_by_path_u32() Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Revert "Correct fixup relocation for mpc8260"Grant Likely2007-11-15-1/+2
| | | | | This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* add ft_cpu_setup(..) on mpc8260Sergej Stepanov2007-11-03-0/+38
| | | | | | | | Add ft_cpu_setup(..)-function to adapt it for use with libfdt based on code from mpc5xxx Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
* cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-3/+3
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* cpu/m*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-16/+16
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fixing some typos etc. introduced mainly by cfg patches.Wolfgang Denk2007-07-05-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Correct fixup relocation for mpc8260Grant Likely2007-07-04-2/+1
| | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Consolidate mpc8260 linker scriptsGrant Likely2007-07-04-0/+128
| | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-15/+16
| | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2007-06-22-2/+2
|
* [ppc] Fix build breakage for all non-4xx PowerPC variants.Rafal Jaworowski2007-06-22-2/+2
| | | | | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup
* [PATCH] TQM8272: dont change the bits given from the HRCWHeiko Schocher2007-03-21-21/+5
| | | | | | | for the SIUMCR and BCR Register. Fix the calculation for the EEprom Size Signed-off-by: Heiko Schocher <hs@denx.de>
* Added support for the TQM8272 board from TQHeiko Schocher2006-12-21-2/+62
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-09-1/+1
| | | | Based on patch by Mike Frysinger, 20 Jun 2006
generated by cgit v1.1 at 2024-11-20 07:53:46 +0000