summaryrefslogtreecommitdiff
path: root/cpu/blackfin
Commit message (Collapse)AuthorAgeLines
* blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/*Peter Tyser2010-04-13-2757/+0
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Blackfin: add support for kgdbRobin Getz2010-01-17-5/+157
| | | | | Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: handle anomaly 05000257Robin Getz2010-01-17-1/+10
| | | | | | | Need to reload the loop counters to keep from corrupting hardware loops. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: keep hwtrace on CPLB missRobin Getz2010-01-17-0/+9
| | | | | | | | | Crashes rarely happen in the CPLB miss handler compared to the rest of U-Boot code, so disable hardware tracing when processing misses. This way a crash due to other functions will be shown properly. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: use new bfin read/write mmr helper funcsMike Frysinger2010-01-17-79/+90
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: move watchdog config check to MakefileMike Frysinger2010-01-17-4/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: support boards with no external memoryMike Frysinger2010-01-17-1/+21
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: re-architect initcodeMike Frysinger2010-01-17-52/+169
| | | | | | | | The single initcode function was growing unwieldy, so split it up the distinct steps into their own function. This should making digesting the result much easier on people. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: move section length calculation to linker scriptMike Frysinger2010-01-17-16/+13
| | | | | | | The length of the sections is fixed at link time, so let the linker do the calculation rather than doing it ourselves at runtime. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Generic udelay() with watchdog supportIngo van Lil2009-12-05-1/+1
| | | | | | | | | | | | | According to the PPC reference implementation the udelay() function is responsible for resetting the watchdog timer as frequently as needed. Most other architectures do not meet that requirement, so long-running operations might result in a watchdog reset. This patch adds a generic udelay() function which takes care of resetting the watchdog before calling an architecture-specific __udelay(). Signed-off-by: Ingo van Lil <inguin@gmx.de>
* Blackfin: reset watchdog in udelay()Mike Frysinger2009-10-13-0/+3
| | | | | | | | | | | | | | All arches apparently should reset the watchdog in their udelay loop as noted on the mailing list recently: > A comment in flash_status_check() suggests that udelay() is > expected to reset the watchdog, but I can't find any architecture > where it does. If this is missing in other architectures, it should be fixed at the root cause, i. e. in udelay() or in the respective support routines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: use scratch pad for exception stackMike Frysinger2009-09-02-0/+5
| | | | | | | | | If the memory layout pushes the stack out of the default DCPLB coverage, the exception handler may trigger a double fault by trying to push onto the uncovered stack. So handle the exception stack similar to the kernel by using the top of the scratch pad SRAM. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: split cpu COBJS into multilinesMike Frysinger2009-07-18-1/+7
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add os log functionsMike Frysinger2009-07-18-1/+31
| | | | | | | | Part of the mini Blackfin ABI with operating systems is that they can use 0x4f0-0x4f8 to pass log buffers to/from bootloaders. So add support to U-Boot for reading the log buffer. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* stdio/device: rework function naming conventionJean-Christophe PLAGNIOL-VILLARD2009-07-18-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Blackfin: bump up default JTAG console timeoutVivi Li2009-06-15-1/+1
| | | | | | | | | | The debug tools that interface with the other side of the JTAG console got much slower when generalizing things, so bump up the default timeout value on the U-Boot side to cope. Hopefully at some point we can improve the debug tools to speed things back up. Signed-off-by: Vivi Li <vivi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Add support for Linux-like kallsysmsMike Frysinger2009-06-12-48/+5
| | | | | | | The kernel stores address<->symbol names in it so things can be decoded at runtime. Do it in U-Boot, and we get nice symbol decoding when crashing. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix timer_init()/timer_reset()Graf Yang2009-05-19-2/+3
| | | | | | | | | | | | | The timer_init() function was not using the right csync instruction, nor was it doing it right after disabling the core timer. The timer_reset() function would reset the timestamp, but not the actual timer, so there was a common edge case where get_timer() return a jump of one timestamp (couple milliseconds) right after resetting. This caused many functions to improperly timeout right away. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: avoid get_sclk() with early serial debugMike Frysinger2009-05-06-5/+5
| | | | | | | | When the clock functions were changed to use cached values (and thereby avoiding expensive math functions), early serial debug broke because the baud programming is called before external memory is available. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix booting with older bootroms (no EVT1)Mike Frysinger2009-05-06-1/+11
| | | | | | | | | | | When dropping jump block support, the assumption was that all bootroms supported entry point redirection via the EVT1 register. Unfortunately, this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2 and older and BF561). No one really noticed earlier because these parts usually are booted by bypassing the bootrom entirely, and older BF533 parts are not supported at all (too many anomalies). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: recurse with early serial initcodeMike Frysinger2009-05-06-1/+1
| | | | | | | Make sure we recurse through serial_putc() rather than bang on the UART transmit register directly to avoid hardware overflows when using \n. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: audit UART for all known anomaliesMike Frysinger2009-04-06-2/+21
| | | | | | | There is no code change here, just new comments, but this keeps me from having to do another audit from scratch in the future. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add check for anomaly 05000362Mike Frysinger2009-04-06-0/+9
| | | | | | | | | | | | | | | DESCRIPTION: The column address width settings for banks 2 and 3 are misconnected in the SDRAM controller. Accesses to bank 2 will result in an error if the Column Address Width for bank 3 (EB3CAW ) is not set to be the same as that of bank 2. WORKAROUND: If using bank 2, make sure that banks 2 and 3 have the same column address width settings in the EBIU_SDBCTL register. This must be the case regardless of whether or not bank 3 is enabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add comment about anomaly 05000430 avoidanceMike Frysinger2009-04-06-0/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add workaround for anomaly 05000242Mike Frysinger2009-04-06-1/+1
| | | | | | | | | | | | | DESCRIPTION: If the DF bit is set prior to a hardware reset, the PLL will continue to divide CLKIN by 2 after the hardware reset, but the DF bit itself will be cleared in the PLL_CTL register. WORKAROUND: Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by 2 after reset. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add workaround for anomaly 05000171Mike Frysinger2009-04-06-0/+4
| | | | | | | | | | | | | DESCRIPTION: The Boot ROM is executed at power up/reset and changes the value of the SICA_IWR registers from their default reset value of 0xFFFF, but does not restore them. WORKAROUND: User code should not rely on the default value of these registers. Set the desired values explicitly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: do not delay on output bytesMike Frysinger2009-04-02-4/+0
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix crash when booting from external memoryMike Frysinger2009-04-02-0/+11
| | | | | | | | | When testing a u-boot binary that hasn't been booted from the bootrom, we have to make sure the bootstruct structure has sane storage space. If we don't, the initcode will crash when it tries to dereference an invalid pointer. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: put memory into self-refresh before/after programming clocksMike Frysinger2009-03-23-82/+190
| | | | | | | | | | | When initializing the core clocks, stick external memory into self-refresh. This gains us a few cool things: - support suspend-to-RAM with Linux - reprogram clocks automatically when doing "go" on u-boot.bin in RAM - make sure settings are stable before flashing new version - finally fully unify initialize startup code path between LDR/non-LDR Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: do not program voltage regulator on parts that do not have oneMike Frysinger2009-03-23-3/+20
| | | | | | | Some newer Blackfins (like the BF51x) do not have an on-chip voltage regulator, so do not attempt to program the memory as if it does. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllersMike Frysinger2009-03-23-0/+33
| | | | | | | If the board config does not specify an explicit EBIU_SDBCTL value, set it up with sane values based on other configuration options. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: handle reboot anomaly 432Mike Frysinger2009-03-23-0/+6
| | | | | | | | | | | Workaround anomaly 432: The bfrom_SysControl() firmware function does not clear the SIC_IWR1 register before executing the PLL programming sequence. Therefore, any interrupt enabled in the SIC_IWR1 register prior to the call to bfrom_SysControl() can prematurely terminate the idle sequence required for the PLL to relock properly. SIC_IWR0 is properly handled. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: kill off LDR jump blockMike Frysinger2009-03-23-7/+5
| | | | | | | The Boot ROM uses EVT1 as the entry point so set that rather than having to use a tiny jump block in the default EVT1 location. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: simplify symbol_lookup() a bitMike Frysinger2009-03-23-1/+1
| | | | | | No need to skip a byte as the symbol table handles this. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: mark bfin_reset staticMike Frysinger2009-03-23-1/+1
| | | | | | The function is only used locally, so mark it static. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix jtag console tstcMike Frysinger2009-03-23-4/+11
| | | | | | | | | | The jtag tstc operation was checking the hardware to see if data is available from it (which is fine for the jtag getc operation), but the higher layers need to know whether any data is available. Since we have to read up to 4 bytes at a time from the hardware, the higher layers need to know they can consume the cached bytes as well. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: disable syscontrol code for nowMike Frysinger2009-02-21-0/+1
| | | | | | | | | | Looks like the initcode updates fell out of order during my merges. The patch that really fixes up this code is part of power-on overhaul and so is too large for merging at this point. Instead, we can disable the code as no currently in-tree board depends on it. The next merge window will fix things up properly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: dynamically update UART speed when initializingMike Frysinger2009-02-05-91/+43
| | | | | | | | | Previously, booting over the UART required the baud rate to be known ahead of time. Using a bit of tricky simple math, we can calculate the new board rate based on the old divisors. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
* Blackfin: add support for fast SPI reads with Boot ROMMike Frysinger2009-02-05-8/+17
| | | | | | | Newer Blackfin boot roms support using the fast SPI read command rather than just the slow one. If the functionality is available, then use it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: check for reserved settings in DDR MMRsMike Frysinger2009-02-05-0/+7
| | | | | | | Some bits of the DDR MMRs should not be set. If they do, bad things may happen (like random failures or hardware destruction). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: set default voltage levels for BF538/BF539 partsMike Frysinger2009-02-05-0/+3
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: use on-chip syscontrol() rom function when availableMike Frysinger2009-02-05-22/+38
| | | | | | | | Newer Blackfin's have an on-chip rom with a syscontrol() function that needs to be used to properly program the memory and voltage settings as it will include (possibly critical) factory tested bias values. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: rewrite cache handling functionsMike Frysinger2009-02-02-46/+72
| | | | | | | Take the cache flush functions from the kernel as they use hardware loops in order to get optimal performance. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: enable --gc-sectionsMike Frysinger2009-02-02-0/+1
| | | | | | | Start building all Blackfin boards with -ffunction-sections/-fdata-sections and linking with --gc-sections. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: dont check baud if it wont actually get usedMike Frysinger2009-02-02-1/+5
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fixup misc warnings such as printf's and missing castsMike Frysinger2009-01-28-10/+11
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: allow serial console to be disabledMike Frysinger2009-01-28-0/+8
| | | | | | | Some devices have no UART device pulled out, so allow people to disable the driver completely in favor of other methods (like JTAG-console). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: support console-over-JTAGMike Frysinger2009-01-28-4/+130
| | | | | | | The Blackfin JTAG has the ability to pass data via a back-channel without halting the processor. Utilize that channel to emulate a console. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: handle new anomalies with resetMike Frysinger2009-01-28-5/+15
| | | | | | Workaround fun new anomalies related to software reset of the processor. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: pass RETX to LinuxMike Frysinger2009-01-28-0/+6
| | | | | | | Make sure we save the value of RETX at power on and then pass it on to the kernel so that it can nicely debug a "double-fault-caused-a-reset" crash. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-11-27 05:01:26 +0000