summaryrefslogtreecommitdiff
path: root/cpu/arm920t/start.S
Commit message (Collapse)AuthorAgeLines
* Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 codekevin.morfitt@fearnside-systems.co.uk2009-10-13-30/+33
| | | | | | | | | | | | | | | | | | | | | | | | This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in preparation for changes to add support for the Embest SBC2440-II Board. The changes are as follows: - re-indent the code using Lindent - make sure register layouts are defined using a C struct - replace the upper-case typedef'ed C struct names with lower case non-typedef'ed ones - make sure registers are accessed using the proper accessor functions - run checkpatch.pl and fix any error reports It assumes the following patch has been applied first: - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have any s3c2400 or s3c2410 boards but need this patch applying before I can submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no new warnings or errors were found. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* cpu/arm920t/start.S: include <common.h> to have ROUND() definedWolfgang Denk2009-07-27-2/+1
| | | | | | | Commit fcd3c87e made include/common.h usable by assembler code but failed to update cpu/arm920t/start.S Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix e-mail address of Gary Jennejohn.Detlev Zundel2009-05-15-1/+1
| | | | Signed-off-by: Detlev Zundel <dzu@denx.de>
* Add support for the AT91RM9200EK Board.Ulf Samuelsson2009-04-04-3/+1
| | | | | | | | | | | | | | | | | | | The AT91RM9200-EK Evaluation Board supports the AT91RM9200 ARM9-based 32-bit RISC microcontroller and enables real-time code development and evaluation. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507 with - NOR (cfi driver) - DataFlash - USB OHCI - Net - I2C (hard) Signed-off-by: Ulf Samuelsson <ulf@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* AT91: remove non supported board AT91RM9200DF macroJean-Christophe PLAGNIOL-VILLARD2008-12-02-2/+2
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* AT91RM9200DK: fix broken boot from NOR flashWolfgang Denk2008-11-24-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* at91rm9200: fix broken boot from nor flashJens Scharsig2008-11-24-4/+1
| | | | | | | This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if CONFIG_AT91RM9200 is defined and nor preloader is used. Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-6/+6
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* arm920t fix constant error in start.SAndrew Dyer2008-09-12-2/+4
| | | | | | | | | Code in cpu/arm920t/start.S will die with a compilation error if CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for the ARM sub instruction. Change the code so that each is subtracted independently to avoid the error. Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
* Big white-space cleanup.Wolfgang Denk2008-05-21-10/+10
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"Guennadi Liakhovetski2008-04-17-1/+1
| | | | | | | | | | | | | | Restore logic reverted by commit commit 80767a6cead9990d9e77e62be947843c2c72f469 Author: Peter Pearse <peter.pearse@arm.com> Date: Wed Sep 5 16:04:41 2007 +0100 Changed API name to coloured_led.h Removed code using deprecated ifdef CONFIG_BOOTBINFUNC Tidied other cpu/arm920t/start.S code Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* ARM: arm920t: Allow use of 'gd' pointer from IRQHarald Welte2008-02-04-5/+5
| | | | | | | | This patch allows us to use the 'gd' pointer (and thus environment and everything else associated with it) from interrupt context on arm920t. Signed-off-by: Harald Welte <laforge@openmoko.org>
* Move coloured led API to status_led.hPeter Pearse2007-09-18-1/+1
| | | | Improve indentation in drivers/at45.c
* Final tidyPeter Pearse2007-09-11-0/+0
|
* Changed API name to coloured_led.hPeter Pearse2007-09-05-105/+21
| | | | | Removed code using deprecated ifdef CONFIG_BOOTBINFUNC Tidied other cpu/arm920t/start.S code
* Add coloured led interface for ARM boards.Peter Pearse2007-09-04-8/+6
| | | | Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
* Add MACH_TYPE records for several AT91 boards.Peter Pearse2007-08-14-2/+91
| | | | | | | | | | | Merge to two at45.c files into a common file, split to at45.c and spi.c Fix spelling error in DM9161 PHY Support. Initialize at91rm9200 board (and set LED). Add PIO control for at91rm9200dk LEDs and Mux. Change dataflash partition boundaries to be compatible with Linux 2.6. Signed-off-by: Peter Pearse <peter.pearse@arm.com> Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.SWolfgang Denk2006-04-03-1/+2
| | | | Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
* Update make target for ARM supported boards.Wolfgang Denk2005-10-06-2/+0
| | | | | Use lowlevel_init() instead of platformsetup() [rename]. Patch by Peter Pearse, 06 Oct 2005
* Patches by Steven Scholz, 05 Apr 2005:wdenk2005-04-05-36/+0
| | | | | | | - Use i.MX watchdog timer for reset_cpu() - Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/ (now in interupts.c)
* Patch by Steven Scholz, 4 Apr 2005:wdenk2005-04-04-1/+3
| | | | | | - remove all references to CONFIG_INIT_CRITICAL for ARM based boards - introduce two new configuration options instead: CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
* Prepare for SoC rework of ARM code:wdenk2005-04-02-2/+2
| | | | | - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL - rename memsetup into lowlevel_init (function name and source files)
* * Patch by Jon Loeliger, 02 Sep 2004:wdenk2005-01-09-1/+1
| | | | | | | | | | | | | | Reset monitor size back to 256 so environment can be written to flash on MPC85xx ADS and CDS releases. * Patch by Paolo Broggini, 02 Sep 2004: Make BSS clearing on ARM systems more robust * Patch by Yue Hu and Joe, 01 Sep 2004: - add PCI support for ixp425; - add EEPRO100 suppor tfor ixdp425 board. * Fix problem with protected sector detection in driver/cfi_flash.c
* * Code cleanupwdenk2004-08-01-13/+11
| | | | | | | | | | | | | * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
* Patch by Markus Pietrek, 04 May 2004:wdenk2004-06-09-1/+0
| | | | | Fix clear_bss code for ARM systems (all except s3c44b0 which doesn't clear BSS at all?)
* Patch by Anders Larsen, 09 Jan 2004:wdenk2004-02-08-16/+26
| | | | | | | | | | ARM memory layout fixes: the abort-stack is now set up in the correct RAM area, and the BSS is zeroed out as it should be. Furthermore, the magic variables 'armboot_end' and 'armboot_end_data' of the linker scripts are replaced by '__bss_start' and '_end', resp., which is a further step to eliminate unnecessary differences between the implementation of the CPU architectures.
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-06-29/+21
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* Support new configuration of TRAB board with more memorywdenk2003-09-17-3/+0
| | | | Minor cleanup of comments
* * Code cleanup:wdenk2003-06-27-3/+0
| | | | | | | | | - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
* * Fix data abort exception handling for arm920t CPUwdenk2003-05-28-4/+2
| | | | | | | | | | | | * Fix alignment problems with flash driver for TRAB board * Patch by Donald White, 21 May 2003: fix calculation of base address in pci_hose_config_device() * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always execute "cmd2", even if "cmd1" fails. Note that this is different to "run var1 var2" where the contents of "var2" will NOT be executed when a command in "var1" fails.
* * Avoid flicker on the TRAB's VFD by synchronizing the enable withwdenk2003-03-14-0/+3
| | | | | | | | | | | | | | | | | | | the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 boards, version 153 for Rev. 200 boards). * Patch by Vladimir Gurevich, 12 Mar 2003: Fix relocation problem of statically initialized string pointers in common/cmd_pci.c * Patch by Kai-Uwe Blöm, 12 Mar 2003: Cleanup & bug fixes for JFFS2 code: - the memory mangement was broken. It caused havoc on malloc by writing beyond the block boundaries. - the length calculation for files was wrong, sometimes resulting in short file reads. - data copying now optionally takes fragment version numbers into account, to avoid copying from older data. See doc/README.JFFS2 for details.
* Initial revisionwdenk2002-11-03-0/+475
generated by cgit v1.1 at 2024-11-12 20:13:02 +0000