summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* MLK-12998 imx: mx6ullevk: Add build targets for boot devicesYe Li2016-07-26-0/+15
| | | | | | Add build targets for eMMC, NAND and QSPI NOR. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12988 imx: mx6ull Add board support for i.MX6ULL EVKYe Li2016-07-19-0/+5
| | | | | | | | | | | | | | | | | | | | | Add configs and board level codes for i.MX6ULL 14x14 EVK. Very similar board from i.MX6UL EVK. I2C, UART, USB, QSPI, SD, ENET and LCD are ok to work. The codes for i.MX6ULL 9x9 EVK is kept. We will add 9x9 build target when it is needed. The DDR3 script is using version 1.2: File: EVK_IMX6ULL_DDR3L_400MHz_512MB_16bit_V1.2_NewDRAM.inc Test: 3 boards passed memtester. Build target: mx6ull_14x14_evk_defconfig Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12848: mx6ull_14x14_ddr3_arm2: add new TSC configHaibo Chen2016-05-24-0/+5
| | | | | | | | Due to TSC pin conflict with I2C1 bus, and PMIC is this I2C1 bus's slave, this patch add new TSC config for i.mx6ull_14x14_ddr3_arm2 board, disable PMIC and ldo bypass check. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
* MLK-12815: mx6ul_14x14_evk: add new NAND config for i.MX6UL 14x14 EVK boardHan Xu2016-05-23-0/+7
| | | | | | | | add new NAND config for i.MX6UL 14x14 EVK board, and disable USDHC2 when NAND enabled due to pin conflict. Signed-off-by: Han Xu <han.xu@nxp.com> (cherry picked from commit 81e175bcc07792fab6010761daf6576bd600edda)
* MLK-12775 mx6ullarm2: Add package size info to the build target and dtb fileYe Li2016-05-11-0/+0
| | | | | | | | To align with i.MX6UL, add the chip package size info to the i.MX6ULL ARM2 board build target and loading dtb file name. So that mfgtool and yocto can follow i.MX6UL naming rule to process i.MX6ULL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12736 mx6ulevk: Delete obsoleted android build targetYe Li2016-04-29-14/+0
| | | | | | | The build target mx6ul_14x14_evk_android_defconfig is obsoleted. It is replaced by mx6ul_14x14_evk_brillo_defconfig. So remove this old file. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12705-2 imx7d: add build target for TO1.1Anson Huang2016-04-29-6/+6
| | | | | | | Default build target supports TO1.0 and TO1.2, TO1.1 uses its own defconfig. Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
* MLK-12691-2 mx6ullarm2: Add build targets for various boot devicesYe Li2016-04-21-0/+20
| | | | | | Four build targets added for eMMC, NAND, QSPIA and SPINOR boot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12691-1 mx6ullarm2: Update config file to remove unnecessary settingsYe Li2016-04-21-5/+1
| | | | | | | To align with other i.mx6 platforms, update config file to remove some unnecessary settings. Also enable the GPIO command. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12616-11 imx: mx6ull: add mx6ull arm2 board supportPeng Fan2016-04-13-0/+9
| | | | | | | | | | | | | Support mx6ull ddr3 arm2 board. DDR script version 1.1. Passed memtester on 3 boards. Take mx6ul 14x14 ddr3 arm2 as reference. Note: LCD/NAND/ECSPI not tested, need hardware rework. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 584050b98cf070bb608b652e89659ff20c47efba)
* MLK-12416-9: mx6qp: define CONFIG_MX6QPPeng Fan2016-03-25-10/+10
| | | | | | Define CONFIG_MX6QP, otherwise plugin code will use wrong ddr script. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12416-8: mx6ul: add DDR3L_MT41K256M16HA configsPeng Fan2016-03-25-0/+28
| | | | | | Add configs for 6ul evk which use DDR3L_MT41K256M16HA. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2016-03-25-1/+1
| | | | | | | | | | | | | Setup MMDC in two channel fixed mode Initialize dram banks for two channel fixed mode DRAM bank = 0x00000000 -> start = 0x10000000 -> size = 0x20000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x20000000 Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
* MLK-12531 mx6sxsabresd: Add CM4 fast boot up demoYe Li2016-03-25-0/+5
| | | | | | | | | | | | | | | | | This is a demo that CM4 will boot up by u-boot without typing any command. It boots up at u-boot early init, try to minimize the time from power up to the CM4 running. Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in u-boot to avoid conflict. RDC for shared GPIO1 is added, but not enabled, because the kernel is not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to enable it. Some legacy codes in mx6sxsabreauto are removed. We only need this work on mx6sxsabresd as a demo. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12527-3 android: Add board support to enable android fastbootYe Li2016-03-25-0/+98
| | | | | | | | | | | Add board level support for android fastboot feature. Each board has a android specified header file for defining android related configuraitons. And add build targets for their android uboot images building. For mx6qsabreauto, mx6sabresd and mx7dsabresd, we enable the android fastboot exclusive with DFU. Signed-off-by: Ye Li <ye.li@nxp.com>
* MA-7455-1 Pico: modify Pico configuration for Brillo.Peng Fan2016-03-25-1/+9
| | | | | | | | | Modify the picosom to be suit for Brillo configurations. Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com> (cherry picked from commit 864fd4f019674e8333b1fdb91e9242ae75f35992) To align with 2016.03, fix several places. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MA-7455 Import picosom boot codesHaoran Wang2016-03-25-0/+6
| | | | | | | | | Imported the picosom boot codes and board configs from technexion. Signed-off-by: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com> (cherry picked from commit d102c193f3f903055239f07ddbaab63715dbf82f)
* MLK-12497-2 mx7d: Add reference DDR script for mx7d TO1.0Ye Li2016-03-25-0/+54
| | | | | | | | | | | | | | | | | | | On i.MX7D TO1.1, design team adds a mux cell at the CKE path to fix the suspend mode reset issue, but seems it add extra delay on CKE path, so CKE-CK timing violated. When DDR enters self-refresh or retention for long time(> 15seconds per testing on some boards), DDR data corruption occured, not able to decrease CKE delay, so we have to add extra delay on all other signals to balance it. DDR script needs to be fine-tuned according to this hardware change. For DDR3, since the timing margin is not good, we have to decrease the DDR frequency from 533Mhz to 400Mhz. We uses TO1.1 script at default, and retains the TO1.0 script for reference. Compass link: http://compass.freescale.net/livelink/livelink?func=ll&objid=235010235&objAction=browse&sort=name Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12497-1 mx7d: Add support for all mx7d arm2 boardsYe Li2016-03-25-0/+90
| | | | | | | Porting all mx7d arm2 boards (mx7d 12x12 lpddr3, 12x12 ddr3, 19x19 ddr3, 19x19 lpddr2, 19x19 lpddr3) support from u-boot v2015.04. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12493-1 Add support for various boot deviceYe Li2016-03-25-75/+142
| | | | | | | | | Add support for various boot devices like NAND, QSPINOR, SPINOR, eMMC, EIMNOR, SATA. Modify board level files to support the feature and add corresponding defconfig files Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12486-2 imx6: Add i.mx6sx/ul arm2 boardsPeng Fan2016-03-25-0/+115
| | | | | | | | | Add i.MX6SX/UL arm2 boards support. Most code are from imx_v2015.04, but adapted to 2016.03 release. Tested on mx6ul_14x14_ddr3_arm2 and mx6sx_19x19_ddr3_arm2. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12564-2 imx: mx7d: move MX7D to Kconfig entryPeng Fan2016-03-25-2/+2
| | | | | | | | If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX7D" to boards using i.MX7 Dual. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12564-1 imx: mx6sx: move MX6SX to Kconfig entryPeng Fan2016-03-25-3/+3
| | | | | | | | If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX6SX" to boards using i.MX6 SoloX. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12436-11: mx6sabresd: add 6qp and solo build targetPeng Fan2016-03-25-0/+18
| | | | | | Add default build target for mx6qp and mx6solo. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12436-7: imx: mx6qsabreauto: add solo board supportPeng Fan2016-03-25-0/+9
| | | | | | Add solo version ddr script and build target. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12436-3: mx6qarm2: add new board revision supportPeng Fan2016-03-25-0/+5
| | | | | | | | | | | | | | Add mx6qarm2 new board revision support using mx6q pop SoC Enable DRAM support for imx6q PoP SoC with populated LPDDR2 MT42L128M64D2 DDR calibration script: http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/040ee38ba9ad238fcb6053b663746d51321abb69 Test result: Stress test passed. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
* MLK-12436-1: mx6qarm2: support lpddr2 boardPeng Fan2016-03-25-0/+5
| | | | | | Support lpddr2 board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-7: mx7dsabresd: support epdcPeng Fan2016-03-25-0/+9
| | | | | | | | Support epdc for mx7dsabresd board. Introduce a new configuration file mx7dsabresd_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-4: mx6dlsabresd: support epdcPeng Fan2016-03-25-0/+9
| | | | | | | | Support epdc for mx6dlsabresd board. Introduce a new configuration file mx6dlsabresd_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12425-3: mx6slevk: support epdcPeng Fan2016-03-25-0/+9
| | | | | | | | Support epdc for mx6slevk board. Introduce a new configuration file mx6slevk_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12416-5: spi: qspi: align to 2015.04Peng Fan2016-03-25-2/+0
| | | | | | | | | | Switch to use 2015.04 qspi driver. Change header file to adapt to the driver. To i.mx6sx, move config to header file. Tested read/write/erase on 6ulevk/sxai/sxsdb. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12416-1: imx: mx6ul evk: switch to non SPLPeng Fan2016-03-25-4/+2
| | | | | | Switch to default not support SPL. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MIPS: pic32mzdask: use CONFIG_USE_PRIVATE_LIBGCC=yDaniel Schwierzeck2016-03-09-1/+1
| | | | | | | | | | | | | | | | | | | MIPS EL boards should define CONFIG_USE_PRIVATE_LIBGCC=y to work with EB-only toolchains like the one from kernel.org. If one do not globally set CONFIG_USE_PRIVATE_LIBGCC=y, the build fails with: /opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): compiled for a big endian system and target is little endian /opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): endianness incompatible with that of the selected emulation /opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: failed to merge target specific data of file /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) /opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): compiled for a big endian system and target is little endian /opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): endianness incompatible with that of the selected emulation /opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: failed to merge target specific data of file /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) /work/git-trees/u-boot-mips/Makefile:1171: recipe for target 'u-boot' failed One example for a failing build is Travis CI. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Purna Chandra Mandal <purna.mandal@microchip.com>
* OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS supportDerald D. Woods2016-03-08-0/+2
| | | | | | | | | | | | - Add required UBI/UBIFS config definitions - Add reasonable MTD partition layout - Remove JFFS2 config definitions - Drop some CFI verbage and definitions - Make comment 'one-liners' truly one line - Improve readability and content arrangement Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sniper: Various minor cleanups, missing Kconfig configs and reorganisationPaul Kocialkowski2016-02-29-1/+4
| | | | | | | | This introduces some minor cleanups, regarding aspects such as board name, code and headers organization as well as deprecated and missing config options. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: uniphier: rework UniPhier SoC select in KconfigMasahiro Yamada2016-02-29-5/+2
| | | | | | | | | | The chains of "depends on <SoC_name>" in the current Kconfig is clumsy. The idea here is to allow users to choose a SoC group first (SoC group consists of some SoCs that can coexist in one binary). Then, allow to enable/disable each SoC support in the selected SoC group. This makes the Kconfig menu clearer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: merge two defconfig filesMasahiro Yamada2016-02-29-33/+1
| | | | | | | | PH1-Pro5 support and ProXstream2/PH1-LD6b support can coexist in one image and there is bit more room in SPL to accommodate all of them. Merge uniphier_pro5_defconfig into uniphier_pxs2_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: enable UniPhier SD/MMC host driverMasahiro Yamada2016-02-29-0/+5
| | | | | | | Enable the driver in all UniPhier defconfig files and add some needed defines to the common files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: enable GPIO command and driver for UniPhier SoCsMasahiro Yamada2016-02-29-0/+10
| | | | | | | This allows to use the "gpio" command. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* sandbox: Enable the early timerSimon Glass2016-02-26-0/+1
| | | | | | | Enable this so that tracing works with sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* sandbox: Correct ordering of defconfigSimon Glass2016-02-26-5/+5
| | | | | | This has got out of order: fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-02-24-1/+36
|\
| * arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS boardAlison Wang2016-02-24-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1021aqds: Enable driver model lpuart serial driverYork Sun2016-02-24-0/+8
| | | | | | | | | | | | | | | | | | | | | | Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver model suport. Enable lpuart port driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
| * arm: ls1021aqds: Convert to driver model and enable serial supportYork Sun2016-02-23-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Split duart configuration as device tree file. Move /chosen node out of board commone device tree. Convert ls1021aqds nor and SD configurations to driver model support (qspi already uses DM). Enable ns16550 DM serial driver for nor configurations. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
* | arm: am437x: cm-t43: define promptNikita Kiryanov2016-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | Define prompt for cm-t43. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am437x: cm-t43: support all available SPI flash chipsNikita Kiryanov2016-02-24-0/+11
| | | | | | | | | | | | | | | | | | | | Add full support for SPI flash chips to future-proof U-Boot for cm-t43. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am437x: cm-t43: migrate CONFIG_DM_SERIAL to config fileNikita Kiryanov2016-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | Move CONFIG_DM_SERIAL to cm_t43_defconfig. This forces us to update the CONFIG_SYS_NS16550_REG_SIZE value for SPL. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board/BuR: move everything possible from board's headerfile to KConfigHannes Schmelzer2016-02-24-0/+44
| | | | | | | | | | | | | | | | We drop everything possible things from board headerfiles and replace this functionality with responsible settings in Kconfig (_defconfig). Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board/BuR: use default u-boot prompt on all B&R boardsHannes Schmelzer2016-02-24-4/+0
| | | | | | | | | | | | | | | | There is no need to have some specific prompt, so we drop this within defconfigs. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-12-21 05:25:33 +0000