| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
| |
Since only DDR script changed, create build target for SD boot as example
to use TO1.0.
All default build target for 7D platforms are for TO1.1.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Modify the picosom to be suit for Brillo configurations.
Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
| |
Imported the picosom boot codes and board
configs from technexion.
Signed-off-by: Tapani Utriainen <tapani@technexion.com>
Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add mx6qarm2 new board revision support using mx6q pop SoC
Enable DRAM support for imx6q PoP SoC with populated LPDDR2
MT42L128M64D2
DDR calibration script
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/e5c6184940486bcbc28978d60ad3cd996c205a08
Test result: Stress test passed.
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current Micron DDR MT41K256M16HA-125 on i.MX6UL will be EOL. Plan is i.MX6UL
will use the new 20nm litho 4Gb DDR3L MT41K256M16TW-107.
Update DDR script of mx6ul evk board for this new DDR, and use it as default.
http://compass.freescale.net/livelink/livelink?func=ll&objId=234910940&objAction=browse&viewType=1
Test result:
Stress test passed.
Meanwhile add build targets below for old DDR support:
mx6ul_14x14_evk_ddr_eol_android_defconfig
mx6ul_14x14_evk_ddr_eol_brillo_defconfig
mx6ul_14x14_evk_ddr_eol_defconfig
mx6ul_14x14_evk_ddr_eol_qspi1_defconfig
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
1. Default support SPI-NOR for imx6q/dl/solo sabresd board.
2. Fix bug for mx6soloxxx_spinor_defconfig. "nosmp" should be
\"nosmp\".
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add android and sata defconfig file.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add i.MX6QP SabreSD board support.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
|
|
|
|
| |
Add new build target: mx6ul_9x9_evk_qspi1_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
This mx7d 19x19 lpddr2 arm2 board is based on 19x19 lpddr3 arm2 board
with DDR changed to 512M LPDDR2. We added DDR script for LPDDR2 and
a new u-boot build target: mx7d_19x19_lpddr2_arm2_config
LPDDR2 script source: lpddr2_0_1.ds
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The i.mx6ul 9x9 EVK shares the same base board with 6ul 14x14 EVK
with two main changes on CPU board:
1. Change to use pfuze 3000.
2. Use 256MB LPDDR2 memory.
This patch uses a macro CONFIG_6UL_9X9_LPDDR2 to distinguish the changes above,
basing on 14x14 EVK board level codes.
The new build target for the 9x9 EVK: mx6ul_9x9_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Add weimnor boot defconfig
2. move CONFIG_FSL_USDHC and CONFIG_VIDEO to board header
3. Add CONFIG_SYS_FLASH_PROTECTION for mx6ul 14x14 lpddr2 arm2
4. correct CONFIG_SYS_FLASH_SECT_SIZE and CONFIG_SYS_MAX_FLASH_SECT
5. Add comments for setup_eimnor, since ENET2_RXER pin conflicts
with ENET2. Also eimnor support will disable SD1/SD2, need ENET
to boot kernel and nfs using enet. So setup_eimnor should be
invoked after setup_fec
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Add MX6UL LPDDR2 ARM2 board BSP codes, supported peripherals:
SD1, eMMC(USDHC2), USB OTG1, I2C, ENET2, PMIC.
Due to a board issue, the SD1 only supports 1 bit bus width.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
IPU on/ L2 on --> nand fail
IPU close/ L2 on --> nand ok
IPU on/ L2 close --> nand ok
This problem is because mx6qp.cfg should be used for mx6qpsabreauto, but
not imximage.cfg which is for mx6qsabreauto.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
| |
The mx6ul ddr3 arm2 board needs rework to enable the emmc. Since the pin
used by emmc are multiplexed with SD1 and QSPI, the SD1 and QSPI can't work.
The u-boot build target for emmc is: mx6ul_14x14_ddr3_arm2_emmc_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since there is another 9x9 package for mx6ul, modify the BSP names
of ddr3 arm2 board and evk board to add 14x14 package info.
Also modify the loaded dtb file to align with kernel.
After the change, the build target for mx6ul ddr3 arm2 board is:
mx6ul_14x14_ddr3_arm2_config
and the build target for mx6ul evk board is:
mx6ul_14x14_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
Add the default TSOP NAND support and build target.
New build target for nand boot: mx7d_19x19_lpddr3_arm2_nand_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
This config was missed when porting to 2015.04 u-boot.
Signed-off-by: Han Xu <b45815@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add mx7d_19x19_lpddr3_arm2 target board supprt
* Enable i2c, spinor, usb, usdhc, qspi, enet, uart
* Build targets
mx7d_19x19_lpddr3_arm2_defconfig
mx7d_19x19_lpddr3_arm2_eimnor_defconfig
- Set EIMNOR settings for Intel Sibley Asynchronous mode
- Set flash sector size for 256kb (erase block size)
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
Add android features booti, fastboot and recovery to i.MX6UL EVK board.
Since there is no user button on the board, we can't implement
the recovery by using button.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Since the NAND has two pins conflict with SD2, when NAND is enabled, we
must disable SD2. So the CONFIG_SYS_FSL_USDHC_NUM needs configure to 1
and should be moved to under defining CONFIG_SYS_USE_NAND.
New build target for NAND boot:
mx6ul_ddr3_arm2_nand_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
Correct the EIMNOR settings to non-mux mode and set the environment
variables configuration to FLASH when using WEIMNOR boot.
New target is added for build WEIMNOR boot u-boot:
mx6ul_ddr3_arm2_eimnor_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add board code for mx6ul ddr3 arm2 board.
QSPI, USDHC, ENET, USB, VIDEO, SPINOR, EIMNOR
Add sd1, qspi and spinor boot support
DDR script is 1.02 version.
Signed-off-by: Fugang Duan <b38611@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes to support modules on the board:
I2C, SD/eMMC, NAND, QSPI, FEC1/FEC2, USB, LCDIF, 74LV, Serial
DDR version: 1.0
Build target: mx6ulevk_config
mx6ulevk_qspi1_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Add epdc default configuration file.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
should add '\' to string, otherwise this macro will be ignored.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add mx7d_12x12_ddr3_arm2 target board support
* Initial support for mx7d_12x12_ddr3_arm2 target
board add support for base hardware eMMC, SD and
ECSPI boot.
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 51d69f7996cc6e6da8bb3f0af751549cb2435e44)
Conflicts:
boards.cfg
|
|
|
|
|
|
|
| |
Add targets for building u-boot to support QSPI booting and NAND booting.
NAND booting can't work on mx7d TO1.0
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Add DDR script v1.04 for i.MX6DQP SABREAUTO board.
2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
and init the enet pll output to 125Mhz.
3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.
Build target: mx6qpsabreauto_config
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e0b316f071aa17c8e41a50f395346ab9f012e665)
Conflicts:
board/freescale/mx6qsabreauto/mx6qsabreauto.c
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable android fastboot, recovery, booti features for mx7d sabresd
board by using new build target: mx7devkandroid_config
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit bfc2b467ddac9c6eccb3f39aad3663a959546b64)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add udc and fastboot support
We did not use the upstream way.
Currently use CI_UDC and USB_GAGDET of upstream can make fastboot work,
but lack of flash operation, so we still use our way.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN to support
correctly detect temperature sensor.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add i.MX7D SABRESD board BSP codes, with enabled modules:
UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX.
Build target: mx7dsabresd_config
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 3bf52a153e2964d4fdc17f0e8cb816686cbb6c2b)
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes, configuration head file and build target for
19x19 DDR3L ARM2 board with basic functions:
ENET2, I2C, SD/eMMC/MMC, USB, QSPI, ECSPI, pfuze3000 PMIC.
Build target: mx7d_19x19_ddr3_arm2_config
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 58fd869e3097b7461fbfae3d94e3ebbd30ae2474)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes, configuration head file and build target for
12x12 LPDDR3 ARM2 board with basic functions:
ENET, I2C, SD/eMMC/MMC, USB, LCD Splash screen, QSPI, ECSPI,
pfuze3000 PMIC.
Note: pmic and video is still not upstream way
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit ac0d51ef07fdec880e6da318c08d521506640efa)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
| |
Add bsp and configuration file
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
| |
Add bsp and configuration file
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Update mx6sxsabresd board and config file
Note:
Fastboot Android support is not added.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for Inverse Path USB armory board, an open source
flash-drive sized computer based on Freescale i.MX53 SoC.
http://inversepath.com/usbarmory
Signed-off-by: Andrej Rosano <andrej@inversepath.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Chris Kuethe <chris.kuethe@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Vagrant Cascadian <vagrant@debian.org>
Tested-By: Vagrant Cascadian <vagrant@debian.org>
Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB or 128MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
- EEPROM (24M01-compatible)
- RTC (DS1374-compatible)
- Temperature sensor (DS620)
- DACs (2 x MAX518)
- SPI (through SSP interface)
- Port expander MAX6957
- LCD display (HD44780-compatible), controlled
through the port expander and DACs
This board has SPL support, and uses the LPC32XX boot
image format.
Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since commit 326a682358c1 (malloc_f: enable SYS_MALLOC_F by default
if DM is on), Zynq MMC boot hangs up after printing the following:
U-Boot SPL 2015.04-rc5-00053-gadcc570 (Apr 08 2015 - 12:59:11)
mmc boot
reading system.dtb
Prior to commit 326a682358c1, Zynq boards enabled CONFIG_DM, but
not CONFIG_SYS_MALLOC_F. That commit forcibly turned on
CONFIG_SYS_MALLOC_F. I have not figured out the root cause, but
anyway it looks like CONFIG_SYS_MALLOC_F gave a bad impact on the
Zynq MMC boot.
We are planning to have the v2015.04 release in a few days.
I know this is a defensive fixup, but what I can do now is to add
# CONFIG_SYS_MALLOC_F is not set
to every Zynq defconfig file to get back the original behavior.
Tested on:
- Zedboard
- ZC706 board
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The Orangepi_mini is different enough from the regular Orangepi that it needs
its own dtb, but when it got added a copy and paste error was made and it
got the same dtb filename, fix this.
While at it also add a short description of both Orangepi boards to the
defconfig files for them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | | |
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Simon Glass <sjg@chromium.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Now when all infrastructure in ARC is ready for it let's switch ARC UART
to driver model.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Simon Glass <sjg@chromium.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Before that moment our defconfigs were manually modified with addition
of new options. That means once anybody wants to add another option and
re-genarate defconfig with "make defconfig" there will be lots of
differences. So to make future modifications more clean we'll do bulk
re-generation right away.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
|