summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* odroid-c2: Enable distro bootAndreas Färber2017-01-20-1/+0
| | | | | | | | | | | Use the generic "distro" boot framework to enable automatic DHCP boot. MMC and USB are not yet implemented, so this is the only boot option. The fdt and kernel addresses are adopted from downstream; ramdisk and scriptaddr addresses were chosen arbitrarily. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
* ARM: Default to using optimized memset and memcpy routinesTom Rini2017-01-20-0/+21
| | | | | | | | | | | | | | | | | | | | | | We have long had available optimized versions of the memset and memcpy functions that are borrowed from the Linux kernel. We should use these in normal conditions as the speed wins in many workflows outweigh the relatively minor size increase. However, we have a number of places where we're simply too close to size limits in SPL and must be able to make the size vs performance trade-off in those cases. Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: Heiko Schocher <hs@denx.de> Cc: Magnus Lilja <lilja.magnus@gmail.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-01-19-36/+253
|\
| * fsl PPA: enable PPA for ls1043ardb and ls1046ardbHou Zhiqiang2017-01-18-0/+2
| | | | | | | | | | | | | | Enable PPA for ls1043ardb NOR boot and ls1046ardb QSPI boot. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Fix SECURE_BOOT configYork Sun2017-01-18-0/+3
| | | | | | | | | | | | | | | | | | | | | | Without a prompt in Kconfig, SECURE_BOOT cannot be selected by defconfig. The option was dropped unintentionally when defconfig files were cleaned up. Three targets were impacted ls1043ardb_SECURE_BOOT, ls2080ardb_SECURE_BOOT, ls2080aqds_SECURE_BOOT. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: ls1012a: enable driver model for eSDHCYangbo Lu2017-01-18-0/+6
| | | | | | | | | | | | | | Enable driver model for eSDHC on ls1012a rdb and qds boards. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012: Enable CONFIG_DM_USB in defconfigsTang Yuantian2017-01-18-0/+3
| | | | | | | | | | | | | | | | Enables driver model flag CONFIG_DM_USB for LS1012A platform in defconfigs. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Enable PCIe in defconfigsMinghuan Lian2017-01-18-7/+28
| | | | | | | | | | | | | | | | | | The patch enables PCIe in ls2080a defconfigs and removes unused PCIe related macro defines. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: Enable PCIe and E1000 in defconfigsMinghuan Lian2017-01-18-0/+48
| | | | | | | | | | | | | | | | The patch enables PCIe and E1000 in ls1046a related defconfigs. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043a: Enable PCIe and E1000 in defconfigsMinghuan Lian2017-01-18-11/+66
| | | | | | | | | | | | | | | | | | The patch enables PCIe and E1000 in ls1043a defconfigs and removes unused PCIe related macro defines. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1012a: Enable PCIe and E1000 in defconfigsMinghuan Lian2017-01-18-2/+13
| | | | | | | | | | | | | | | | | | The patch enables PCIe and E1000 in ls1012a defconfigs and removes unused PCIe related macro defines Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1021a: Enable PCIe in defconfigsMinghuan Lian2017-01-18-16/+72
| | | | | | | | | | | | | | | | | | The patch enables PCIe in ls1021a defconfigs and removes unused PCIe related macro defines. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * configs: ls1021a: enable DT and DM supportHou Zhiqiang2017-01-18-0/+12
| | | | | | | | | | | | | | | | Enable DT to support Driver Model. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge git://git.denx.de/u-boot-samsungTom Rini2017-01-18-0/+15
|\ \
| * | exynos: video: Enable stdout env var backward compatibility for LCDJavier Martinez Canillas2017-01-18-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bb5930d5c97f ("exynos: video: Convert several boards to driver model for video") converted the Exynos Chromebooks machines to use DM for video, but this breaks backward compatibility with the stdout env var since now stdout is expected to be "vidconsole" instead of "lcd". This causes display to not work when updating u-boot on these boards if the old stdout env var is used. Since these are consumer devices, there's no easy way to have a serial console so users may be confused thinking that u-boot failed to boot, or in the best case will need to update the stdout env var blindly to make the display to work again. There's a CONFIG_VIDCONSOLE_AS_LCD config option to workaround this, so enable it in the Chromebooks' default configuration files to allow users to change their stdout env var before the workaround is removed. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos: Enable XHCI on exynos5250 boardsSjoerd Simons2017-01-18-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once upon a time u-boot didn't support building with two usb host controller types, these days it does. Enable XHCI in addition to the existing EHCI support so user can plug usb devices in all available ports regardless of the controller type. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | configs: s5pc210_universal: enable the DM_PMIC and MAX8998Jaehoon Chung2017-01-18-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the CONFIG_DM_PMIC and CONFIG_DM_PMIC_MAX8998. s5pc210_universal board is using max8998 pmic. To use the i2c/pmic driver model, enable these configurations. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2017-01-17-1/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | - Enable eMMC driver for LD11/LD20 SoCs - Refactoring of SoC init code - Bug fix of pinctrl driver
| * | | ARM: uniphier: enable Cadence eMMC controller for LD11/LD20Masahiro Yamada2017-01-17-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SDMA (Single Operation DMA) for LD11, but not for LD20. The SDMA does not work for LD20 boards because they are generally equipped with more memory than fits in the 32 bit physical address space supported by the SDMA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | | imx: mx6sllevk: add usb supportPeng Fan2017-01-17-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb support for mx6sllevk board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | | | drivers: usb: Add USB_XHCI_ZYNQMP to KconfigMichal Simek2017-01-17-0/+5
|/ / / | | | | | | | | | | | | | | | Move symbol to Kconfig to cleanup configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-01-15-0/+17
|\ \ \
| * | | sunxi: OrangePi Zero: defconfig: enable SPI flashAndre Przywara2017-01-15-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from which the board can actually boot from. Enable the SPL support for the SPI controller and SPI flash to allow putting the SPL, the DT and U-Boot proper into there. This will let a board boot without an SD card inserted. The flash chip can be written with a version of the sunxi-fel tool. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | | sunxi: add orangepi zero defconfigIcenowy Zheng2017-01-15-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Orange Pi Zero is a board designed by Xunlong. It has an Allwinner H2+ SoC (similar to H3, which shares the same SoC ID), 256MB/512MB RAM, Allwinner XR819 SDIO Wi-Fi, a MicroUSB port which is used to power the board (also capable of OTG), a USB Type-A socket and a MicroSD slot. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | | | igep00x0: enable CONFIG_FDT_FIXUP_PARTITIONSLadislav Michl2017-01-14-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SPL partition size depends on sector size and we want kernel to use the same layout, so let U-Boot modify FDT accordingly. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* | | | omapl138_lcdk: enable SPL MMC supportFabien Parent2017-01-14-0/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | Enable SPL MMC support in order to allow to build a single u-boot image that is able to boot from MMC and NAND devices. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | omap3_igep00x0: Rework MACH_TYPE and status LED logic slightlyTom Rini2017-01-14-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MACH_TYPE for IGEP0032 was never officially used and has been removed from upstream, so we must not use it. In order to remove this we need to rework the status LED logic. Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
* | | rockchip: Enable ETH address randomization for the rock2Romain Perier2017-01-11-0/+1
| | | | | | | | | | | | | | | | | | | | | This commit enables ethernet MAC address randomization on the rock2. It removes the error at startup 'ethernet@ff290000 address not set'. Signed-off-by: Romain Perier <romain.perier@collabora.com>
* | | rockchip: evb-rk3339: Enable DHCPSimon Glass2017-01-11-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is the only RK3399 device without DHCP. Enable it so that we can use a common BOOT_TARGET_DEVICES setting. It is likely useful to be able to use USB networking, at least. Full networking can be enabled when a suitable platform needs it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | rockchip: Enable networking support on rock2 and fireflySjoerd Simons2017-01-11-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the various configuration option required to get the ethernet interface up and running on Radxa Rock2 and Firefly. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | rockchip: config: popmetal: enable the USB host controller and functionKever Yang2017-01-11-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RK3288 using the dwc2 USB host controller, enable it and other usb host funtion like storage and ether. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Added rockchip: tag: Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge tag 'xilinx-for-v2017.03' of git://www.denx.de/git/u-boot-microblazeTom Rini2017-01-11-0/+13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xilinx changes for v2017.03 - ATF handoff - DT syncups - gem: Use wait_for_bit(), add simple clk support - Simple clk driver for ZynqMP - Other small changes
| * | | ARM64: zynqmp: Move CONFIG_AHCI from board fileMichal Simek2017-01-11-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Move configuration option from board file to defconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Move CONFIG_SYS_TEXT_BASE to KconfigMichal Simek2017-01-10-0/+12
| | |/ | |/| | | | | | | | | | | | | Enable CONFIG_SYS_TEXT_BASE via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | mmc: move more driver config options to KconfigMasahiro Yamada2017-01-11-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | | mmc: move DesignWare-based drivers to KconfigMasahiro Yamada2017-01-11-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move (and rename) the following CONFIG options to Kconfig: CONFIG_EXYNOS_DWMMC (renamed to CONFIG_MMC_DW_EXYNOS) CONFIG_HIKEY_DWMMC (renamed to CONFIG_MMC_DW_K3) CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA) The "HIKEY" is a board name, so it is not suitable for the MMC controller name. I am following the name used in Linux. This commit was generated as follows: [1] Rename the config options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g ' [2] Commit the changes [3] Create the entries in drivers/mmc/Kconfig (with default y for EXYNOS and SOCFPGA) [4] Run the following: tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA [5] Sort and align drivers/mmc/Makefile for readability [6] Clean-up doc/README.socfpga by hand Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | | mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DWMasahiro Yamada2017-01-11-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit was created as follows: [1] Rename the option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g' [2] create the entry for MMC_DW in drivers/mmc/Kconfig (the prompt and help were copied from Linux) [3] run "tools/moveconfig.py -y MMC_DW" [4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry [5] Clean-up doc/README.socfpga by hand Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | | mmc: rename CONFIG_ROCKCHIP_DWMMC to CONFIG_MMC_DW_ROCKCHIPMasahiro Yamada2017-01-11-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I am trying to make all DesignWare-based driver options prefixed with CONFIG_MMC_DW_. This commit was generated as follows: find . -name .git -prune -o -type f -print | \ xargs sed -i -e 's/ROCKCHIP_DWMMC/MMC_DW_ROCKCHIP/g' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | | Merge git://git.denx.de/u-boot-dmTom Rini2017-01-10-0/+3
|\ \ \
| * | | defconfig: am335x_evm: enable usb driver modelMugunthan V N2017-01-09-0/+3
| |/ / | | | | | | | | | | | | | | | | | | | | | enable usb driver model for am335x bbb as musb supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-01-10-3/+2
|\ \ \ | |/ / |/| |
| * | sunxi: A64: enable SPLAndre Przywara2017-01-04-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the SPL is ready to be compiled in AArch64 and the DRAM init code is ready, enable SPL support for the A64 SoC and in the Pine64 defconfig. For now we keep the boot0 header in the U-Boot proper, as this allows to still use boot0 as an SPL replacement without hurting the SPL use case. We disable FEL support for now by making its compilation conditional and disabling it for ARM64, as the code isn't ready yet. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sunxi: provide default DRAM config for sun50i in KconfigAndre Przywara2017-01-04-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid enumerating the very same DRAM values in defconfig files for each and every Allwinner A64 board out there, let's put some sane default values in the Kconfig file. Boards with different needs can override them at any time. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sunxi: introduce extra config option for boot0 headerAndre Przywara2017-01-04-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | The ENABLE_ARM_SOC_BOOT0_HOOK option is a generic option shared with other boards. To allow alternative code to be inserted, we create another, now function specific config symbol on top of it to simplify later additions. No functional change at this time. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | fsl_ddr: Move DDR config options to driver KconfigYork Sun2017-01-04-49/+59
| | | | | | | | | | | | | | | | | | Create driver/ddr/fsl/Kconfig and move existing options. Clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com> [trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s] Signed-off-by: Tom Rini <trini@konsulko.com>
* | powerpc: T1024RDB: Remove macro CONFIG_T1024RDBYork Sun2017-01-04-5/+3
| | | | | | | | | | | | | | | | Use TARGET_T1024RDB from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com> [trini: Get missing hunk in board/freescale/t102xrdb/ddr.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* | powerpc: T1023RDB: Remove macro CONFIG_T1023RDBYork Sun2017-01-04-5/+3
|/ | | | | | Use TARGET_T1023RDB from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-01-02-8/+49
|\
| * imx6ul: geam6ul: Enable I2C supportJagan Teki2017-01-02-0/+2
| | | | | | | | | | | | | | | | | | Enable I2C support for Engicam GEAM6UL NAND module. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * defconfigs: imx6: engicam: Enable FITJagan Teki2017-01-02-0/+24
| | | | | | | | | | | | | | | | | | Enable Flattened Image Tree support for all Engicam boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.1 at 2024-11-07 20:15:26 +0000