summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* rockchip: Add support for Raxda Rock 2Simon Glass2016-01-21-0/+53
| | | | | | | | | | | | This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: firefly-rk3288: Enable HDMI outputSimon Glass2016-01-21-0/+7
| | | | | | Enable HDMI output and a console on firefly. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable EDP and HDMI video outputSimon Glass2016-01-21-0/+6
| | | | | | | | | | | Enable these devices using the VOPL video output device. We explicitly disable VOPB in the device tree to avoid it taking over. Since this device has an LCD display this comes up by default. If the display fails for some reason then it will attempt to use HDMI. It is possible to force it to fail (and thus fall back to HDMI) by puting 'return -EPERM' at the top of rk_edp_probe(). For now there is no easy way to select between the two. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: spl: Support full-speed CPU in SPLSimon Glass2016-01-21-0/+1
| | | | | | | | Add a feature which speeds up the CPU to full speed in SPL to minimise boot time. This is only supported for certain boards (at present only jerry). Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: video: Repurpose the 'displayport' uclass to 'display'Simon Glass2016-01-21-1/+1
| | | | | | | | | | | | | | The current DisplayPort uclass is too specific. The operations it provides are shared with other types of output devices, such as HDMI and LVDS LCD displays. Generalise the uclass so that it can be used with these devices as well. Adjust the uclass to handle the EDID reading and conversion to display_timing internally. Also update nyan-big which is affected by this. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable the Chrome OS ECSimon Glass2016-01-21-0/+8
| | | | | | Turn on the EC and enable the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Drop unused optionsSimon Glass2016-01-21-5/+0
| | | | | | | To reduce the SPL image size, drop the LED features. Jerry does not have an LED and we can leave out GPIO support also. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Disable simple-bus in SPL for firefly-rk3288, jerrySimon Glass2016-01-21-0/+2
| | | | | | This is not needed for booting, so drop it from SPL to save about 300 bytes. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable the RK808 PMIC and regulatorSimon Glass2016-01-21-0/+2
| | | | | | Enable this PMIC and regulator, which is used on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Move firefly and jerry to use the full pinctrlSimon Glass2016-01-21-2/+0
| | | | | | Use the full pinctrl driver in U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Use a separate clock ID for clocksSimon Glass2016-01-21-0/+2
| | | | | | | | | | At present we use the same peripheral ID for clocks and pinctrl. While this works it is probably better to use the device tree clock binding ID for clocks. We can use the clk_get_by_index() function to find this. Update the clock drivers and the code that uses them. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Use pwrseq for MMC start-up on jerrySimon Glass2016-01-21-0/+1
| | | | | | | This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Correct the defconfig orderSimon Glass2016-01-21-5/+5
| | | | | | This has got out of sequence somehow. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-21-3/+34
|\
| * dm: video: test: Add tests for rotated consolesSimon Glass2016-01-20-0/+1
| | | | | | | | | | | | | | Test that text is displayed correctly when the console is rotated. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass2016-01-20-0/+1
| | | | | | | | | | | | | | | | Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * sandbox: Move CONFIG_VIDEO_SANDBOX_SDL to KconfigSimon Glass2016-01-20-1/+2
| | | | | | | | | | | | | | | | Move this option to Kconfig. This is quite simple as only sandbox uses the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * arm: ls1021atwr: Enable driver model lpuart serial driverBin Meng2016-01-20-0/+4
| | | | | | | | | | | | | | | | | | | | | | Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alison Wang <alison.wang@nxp.com> Tested-by: Alison Wang <alison.wang@nxp.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Split off board device treeBin Meng2016-01-20-3/+3
| | | | | | | | | | | | | | Move /chosen node out of the board device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * serial: lpuart: Move CONFIG_FSL_LPUART to KconfigBin Meng2016-01-20-0/+8
| | | | | | | | | | | | | | | | | | | | | | LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. Create a Kconfig option and move it to defconfig for all boards that have this serial driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Convert to driver model and enable serial supportBin Meng2016-01-20-0/+4
| | | | | | | | | | | | | | | | Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * defconfig: dra74_evm: enable timer driver modelMugunthan V N2016-01-20-0/+2
| | | | | | | | | | | | | | | | Enable timer driver model for dra74_evm_defconfig as omap-timer supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * defconfig: dra72_evm: enable timer driver modelMugunthan V N2016-01-20-0/+2
| | | | | | | | | | | | | | | | Enable timer driver model for dra72_evm_defconfig as omap-timer supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * defconfig: am335x_gp_evm: enable timer driver modelMugunthan V N2016-01-20-0/+2
| | | | | | | | | | | | | | | | Enable timer driver model for am335x_gp_evm as omap-timer supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * defconfig: am335x_boneblack_vboot: enable timer driver modelMugunthan V N2016-01-20-0/+2
| | | | | | | | | | | | | | | | Enable timer driver model for am335x_boneblack_vboot as omap-timer supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * defconfig: am437x_gp_evm: enable timer driver modelMugunthan V N2016-01-20-0/+2
| | | | | | | | | | | | | | | | Enable timer driver model for am437x_gp_evm as omap-timer supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * defconfig: am437x_sk_evm: enable timer driver modelMugunthan V N2016-01-20-0/+2
| | | | | | | | | | | | | | | | Enable timer driver model for am437x_sk_evm as omap-timer supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-21-0/+1
|/ | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* stm32: move stm32 specific code to mach-stm32Vikas Manocha2016-01-20-0/+2
| | | | | | | This patch moves stm32 sources at one place, with this armv7m now contains only generic stuff. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
* am335x: BeagleBones enable CONFIG_AUTOBOOT_KEYEDrobertcnelson@gmail.com2016-01-20-0/+12
| | | | | | | | | | | | | On startup, the BeagleBone family of boards can occationally halt at the U-Boot prompt. Due to U-Boot receiving random data on the usart. Migrate BeagleBone based boards to use CONFIG_AUTOBOOT_KEYED, user will now have to enter the <SPACE> key to get to U-Boot prompt Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Craig McQueen <craig.mcqueen@innerrange.com> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* igep00x0: enable CONFIG_NET_RANDOM_ETHADDREnric Balletbò i Serra2016-01-20-0/+3
| | | | | | | | | Enable CONFIG_NET_RANDOM_ETHADDR to generate a random MAC address when ETHADDR is not set. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* microblaze: move CONFIG_SYS_TEXT_BASE to defconfigMasahiro Yamada2016-01-20-0/+1
| | | | | | | This is how CONFIG options are defined by Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* m68k: move CONFIG_SYS_TEXT_BASE to defconfig filesMasahiro Yamada2016-01-20-19/+65
| | | | | | | | | | | | | | | | | | | | | | | | For historical reason, CONFIG_SYS_TEXT_BASE has been specified in various ways: [1] by board/${VENDOR}/${BOARD}/config.mk [2] by CONFIG_SYS_EXTRA_OPTIONS (This was "options" field of boards.cfg before Kconfig conversion) [3] by include/configs/${BOARD}.h [4] by configs/${BOARD}_defconfig Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (Kconfig). We still allow [3] too, because it is still used by many boards and we expect much time for conversion. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it> Reviewed-by: Simon Glass <sjg@chromium.org>
* armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov2016-01-19-0/+24
| | | | | | | | | This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
* axm/taurus: Enable tiny printf in SPLTom Rini2016-01-19-0/+2
| | | | | | | Both of these boards are very close to their limit and with some toolchains such as gcc 5.x are too large. Switch to tiny printf to reclaim some size. Signed-off-by: Tom Rini <trini@konsulko.com>
* vsprintf.c: Always enable CONFIG_SYS_VSNPRINTFTom Rini2016-01-19-9/+0
| | | | | | | | | | | | | | Enabling this function always removes some class of string saftey issues. The size change here in general is about 400 bytes and this seems a reasonable trade-off. Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-01-14-1/+59
|\ | | | | | | | | | | | | Conflicts: arch/arm/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * mvebu: Support Synology DS414Phil Sutter2016-01-14-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: mvebu: Remove SYS_MALLOC_CLEAR_ON_INIT from DB-MV784MP-GP AXP boardStefan Roese2016-01-14-0/+1
| | | | | | | | | | | | | | | | By removing CONFIG_SYS_MALLOC_CLEAR_ON_INIT, the bootup time is a bit faster. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Add SolidRun ClearFog Armada 38x initial supportStefan Roese2016-01-14-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm boardStefan Roese2016-01-14-1/+1
| | | | | | | | | | | | | | | | | | This is needed for the upcoming ethernet DM conversion of the maxbcm board. The configuration of the PHY is then extracted from the DT instead of using the defines from the config header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * arm: mvebu: Add DM and OF_CONTROL support to SPLStefan Roese2016-01-14-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds full DM support to the SPL on MVEBU. Currently only serial is supported. Other drivers will follow. This patch also adds the necessary config values for the DEBUG UART to the MVEBU defconfig files. This came in handy while implementing this DM support. Additionally, the mvebu specific SPL linker script is removed and this common one is used instead: arch/arm/cpu/u-boot-spl.lds This common linker script already handles all special cases. No need to reinvent the wheel for MVEBU here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* | Re-enable setexpr on Raspberry PiMarco Schuster2016-01-13-2/+0
| | | | | | | | | | | | | | | | | | | | This patch re-enables the setexpr command, I don't really understand why it got excluded in the first place. setexpr can be used e.g. to implement failed-boot-counters and failovers to rescue firmware. Signed-off-by: Marco Schuster <m.schuster91@googlemail.com>
* | arm: lpc32xx: switch SPL builds to driver modelVladimir Zapolskiy2016-01-13-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For NXP LPC32xx boards the change enables SPL_DM option, this allows to use any driver model UART driver in SPL images, hence a restriction on HSUART in SPL image is removed and well as definitions for non-DM NS16550 driver, its DM version is used instead. Because SPL_DM requires malloc(), enable CONFIG_SPL_SYS_MALLOC_SIMPLE for LPC32xx boards. The change adds about 5KB to the resulting SPL image (for devkit3250 board SPL image is increased from 10672 to 15608 bytes). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arm: lpc32xx: switch serial console to driver modelVladimir Zapolskiy2016-01-13-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On NXP LPC32xx platform for non-SPL builds the change adds standard (NS16550) and high-speed UARTs to driver model. Due to specific of DM NS16550 device description UART clock can not be got in runtime and by default it is set to 13MHz, if board PERIPH_CLK is different, this should be specified in board configuration file. For SPL builds HSUARTs are disabled and non-DM NS16550 driver is compiled, if needed. The change also updates default configs of devkit3250 and work_92105 boards to reflect updates in platform files. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-01-13-0/+15
|\ \ | |/ |/|
| * arm: socfpga: Enable SPL_DM_SEQ_ALIAS for all SOCFPGA configsNathan Rossi2016-01-13-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is required in SPL to enable support for loading from SPI flash. Also clean up the #define in socfpga_common.h. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm: zynq: Enable SPL_DM_SEQ_ALIAS for all Zynq configsNathan Rossi2016-01-13-0/+10
| | | | | | | | | | | | | | | | | | This feature is required in SPL to enable support for loading from SPI flash when the device is booted from QSPI. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | defconfig: am437x_sk_evm: enable spi driver modelMugunthan V N2016-01-13-0/+3
| | | | | | | | | | | | | | | | | | | | enable spi driver model for am437x_sk_evm as ti_qspi supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | defconfig: dra74_evm: enable spi driver modelMugunthan V N2016-01-13-0/+2
| | | | | | | | | | | | | | | | | | | | enable spi driver model for dra74_evm as ti_qspi supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
generated by cgit v1.1 at 2024-11-14 16:29:07 +0000