summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
...
* sunxi: Ainol AW1 supportPaul Kocialkowski2015-04-15-0/+21
| | | | | | | | | | | | The Ainol AW1 is an A20 based tablet with a 800x480 lcd screen, sdio wifi, volume up/down and home buttons, micro-sd slot, micro usb (otg), headphones connector and a SPCI modem connector. Also see: http://linux-sunxi.org/Ainol_AW1 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: usb: Drop AXP-sepcific VBUS detection and drive logicPaul Kocialkowski2015-04-15-4/+4
| | | | | | | | | VBUS detection and enable is now be used with virtual AXP GPIOs, so all the USB code has to use GPIO in every case and let sunxi_gpio do the heavy lifting. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun6i: Add support for the Mixtile LOFT-Q boardHan Pengfei2015-04-15-0/+21
| | | | | | | | | | | | | The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, NXP JN5168 zigbee gw, remote support. Also see http://focalcrest.com/en/pc.html#pro02 Signed-off-by: Han Pengfei <pengphei@sina.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-13-0/+3
|\
| * ARM: mx5: add support for USB armory boardAndrej Rosano2015-04-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on Freescale i.MX53 SoC. http://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Chris Kuethe <chris.kuethe@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Vagrant Cascadian <vagrant@debian.org> Tested-By: Vagrant Cascadian <vagrant@debian.org> Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
* | lpc32xx: add support for board work_92105Albert ARIBAUD \(3ADEV\)2015-04-10-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC bootMasahiro Yamada2015-04-08-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 326a682358c1 (malloc_f: enable SYS_MALLOC_F by default if DM is on), Zynq MMC boot hangs up after printing the following: U-Boot SPL 2015.04-rc5-00053-gadcc570 (Apr 08 2015 - 12:59:11) mmc boot reading system.dtb Prior to commit 326a682358c1, Zynq boards enabled CONFIG_DM, but not CONFIG_SYS_MALLOC_F. That commit forcibly turned on CONFIG_SYS_MALLOC_F. I have not figured out the root cause, but anyway it looks like CONFIG_SYS_MALLOC_F gave a bad impact on the Zynq MMC boot. We are planning to have the v2015.04 release in a few days. I know this is a defensive fixup, but what I can do now is to add # CONFIG_SYS_MALLOC_F is not set to every Zynq defconfig file to get back the original behavior. Tested on: - Zedboard - ZC706 board Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org>
* | sunxi: Fix Orangepi_mini dtb filenameHans de Goede2015-04-04-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | The Orangepi_mini is different enough from the regular Orangepi that it needs its own dtb, but when it got added a copy and paste error was made and it got the same dtb filename, fix this. While at it also add a short description of both Orangepi boards to the defconfig files for them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | Merge git://git.denx.de/u-boot-arcTom Rini2015-04-03-10/+25
|\ \
| * | board: Switch Abilis TB-100 board to Driver Model for serial portAlexey Brodkin2015-04-03-0/+5
| | | | | | | | | | | | | | | Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
| * | serial-arc: switch to DMAlexey Brodkin2015-04-03-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Now when all infrastructure in ARC is ready for it let's switch ARC UART to driver model. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org>
| * | arc: re-generate defconfigsAlexey Brodkin2015-04-03-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before that moment our defconfigs were manually modified with addition of new options. That means once anybody wants to add another option and re-genarate defconfig with "make defconfig" there will be lots of differences. So to make future modifications more clean we'll do bulk re-generation right away. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-04-03-5/+5
|\ \ \ | |/ / |/| | | | | | | | | | | | | | Conflicts: board/armltd/vexpress64/vexpress64.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * | ARM: tegra: rename colibri_t20 board/configuration/device-treeMarcel Ziswiler2015-03-30-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-03-31-1/+7
|\ \ \
| * | | ARM: atmel: at91sam9n12ek: enable spl supportBo Shen2015-04-01-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL support for at91sam9n12ek boards, now it supports boot up from NAND flash, serial flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: atmel: at91sam9x5ek: enable spl supportBo Shen2015-04-01-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL support for at91sam9x5ek board. Now, it supports boot up from NAND flash and SPI flash. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | ARM: atmel: at91sam9m10g45ek: enable spl supportBo Shen2015-04-01-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supports boot up from NAND flash with software ECC eanbled. And supports boot up from SD/MMC card with FAT file system. As the boot from SD/MMC card with FAT file system, the BSS segment is too big to fit into SRAM, so, use the lds to put it into SDRAM. Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | | arm, at91: corvus: move MACH_TYPE to defconfigHeiko Schocher2015-04-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | move MACH_TYPE into defconfig Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2015-03-31-0/+17
|\ \ \ \ | |/ / / |/| | / | | |/ | |/|
| * | imx:mx6slevk support reading temperaturePeng Fan2015-03-23-0/+8
| | | | | | | | | | | | | | | | | | This patch is to support reading temperature for mx6slevk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | imx:mx6dlsabresd fix error detecting thermalPeng Fan2015-03-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN, uboot will complains "CPU: Temperature: Can't find sensor device". This is because DM and DM_THERMAL are enabled, but SYS_MALLOC_F is not configured. After applying this patch, uboot can correctly detect the temperature. " U-Boot 2015.04-rc2-00146-g48b6e30-dirty (Mar 09 2015 - 13:04:36) CPU: Freescale i.MX6DL rev1.1 at 792 MHz CPU: Temperature 44 C " Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | board/seco: Add mx6q-uq7 basic board supportBoris BREZILLON2015-03-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported). It also adds a Kconfig skeleton to later add more SECO board (supporting SoC and board variants). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* | | sunxi: a10-LIME set the cpu clock at boot to 912MHzIain Paton2015-03-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | following kernel patches to reduce the cpu clock to 912MHz due to reported instability at 1008MHz, select 912MHz as the boot speed for the a10-lime Signed-off-by: Iain Paton <ipaton0@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | vexpress64: cut config and defaults for unclear variantLinus Walleij2015-03-28-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This variant that is neither FVP / Base Model or Juno Versatile Express 64bit is confusing. Get rid of it unless someone can point out what machine that really is. Seems to be an evolutional artifact in the config base. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283xMasahiro Yamada2015-03-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2) are similar enough. One of the biggest differences is the ARM processor. It is reasonable to collect the source files into a single place, arch/arm/mach-bcm283x/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* | | malloc_f: enable SYS_MALLOC_F by default if DM is onMasahiro Yamada2015-03-28-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* | | malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LENMasahiro Yamada2015-03-28-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig as 0x400. Each defconfig or Kconfig need not repeat the same value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* | | sunxi: set GMAC TX delay = 0x1 on Cubietruck.Ian Campbell2015-03-26-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Of 4 boards in our automated test system 2 do not have reliable networking with the default TX delay of 0x0. Increasing to 0x1 seems to make things reliable on all 4 boards. Some previous ad-hpoc tests with tx delay set to 0, 1, 2 and 3 on one of the problematic boards showed: 0: mw.l 0x1c20164 0x006 1 -- t/o in 4/5 tftp runs 1: mw.l 0x1c20164 0x406 1 -- t/o in 1/5 tftp runs 2: mw.l 0x1c20164 0x806 1 -- t/o in 1/5 tftp runs 3: mw.l 0x1c20164 0xc06 1 -- t/o many times in first tftp run For 0, 1 and 2 "t/o" means one or two "T" glitches in the download, but it did complete. For 3 those were basically continuous and it couldn't complete. tftp was of a 16M initrd. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | bav335x: Update defconfigs and fix typo in EEPROM config formatGilles Gameiro2015-03-24-4/+10
| | | | | | | | | | | | | | | | | | After v2015.01 we need to have DM enabled in order to use UART. Also fix a typo in the EEPROM config format. Signed-off-by: Gilles Gameiro <gilles@gigadevices.com> [trini: Reword commit message, re-save defconfigs with 'savedefconfig'] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: UniPhier: enable Driver Model and UART on SPLMasahiro Yamada2015-03-24-0/+3
|/ | | | | | | | | | | Enable CONFIG_SPL_DM and CONFIG_SPL_SERIAL_SUPPORT, which provide Driver Model UART support on SPL. CONFIG_SYS_SPL_MALLOC_{START,SIZE} should be dropped because simple malloc is preferred on SPL. Dlmalloc requires some static variables on .data section that is not available yet for NOR boot mode etc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=yTom Rini2015-03-20-0/+1
| | | | | | | This flag was missing and thus the board was totally being configured wrong. Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: at91: at91sam9rlek: add hush parser to defconfigWu, Josh2015-03-18-0/+3
| | | | | | | | HUSH parser will handle the variable easier. That will be helpful for write a complicated U-Boot commands or varaibles. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com>
* ARM: at91: at91sam9rlek: add mmc environment configurationWu, Josh2015-03-18-0/+3
| | | | | | | Add a mmc default config, which will save the environment in a FAT file (uboot.env) of MMC. Signed-off-by: Josh Wu <josh.wu@atmel.com>
* powerpc: ppc4xx: remove korat board supportMasahiro Yamada2015-03-17-7/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Larry Johnson <lrj@acm.org>
* powerpc: mpc5xxx: remove galaxy5200 board supportMasahiro Yamada2015-03-17-8/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Eric Millbrandt <emillbrandt@dekaresearch.com>
* powerpc: ppc4xx: remove W7OLMC/W7OLMG board supportMasahiro Yamada2015-03-17-6/+0
| | | | | | | | They have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Erik Theisen <etheisen@mindspring.com>
* powerpc: mpc5xxx: remove aev, TB5200 board supportMasahiro Yamada2015-03-17-10/+0
| | | | | | | They have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove JSE board supportMasahiro Yamada2015-03-17-3/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stephen Williams <steve@icarus.com>
* powerpc: mpc5xxx: remove BC3450 board supportMasahiro Yamada2015-03-17-3/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* odroid: defconfig: fix build break caused by missing dtsPrzemyslaw Marczak2015-03-17-0/+1
| | | | | | | | | | | | The build break was caused by one of my previous commit: 'odroid: defconfig: disable memset at malloc init' It removes the dts from odroid defconfig - rebase mistake. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* kconfig: remove meaningless prefixes in defconfig filesMasahiro Yamada2015-03-15-1013/+1013
| | | | | | | | | | | | Since commit e02ee2548afe (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-03-10-3/+4
|\ | | | | | | | | | | | | Conflicts: README Signed-off-by: Tom Rini <trini@konsulko.com>
| * edminiv2: switch to SPLAlbert ARIBAUD2015-02-25-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ED Mini V2 is based on Orion 5x which boots at fixed address 0xFFFF0000 in NOR Flash. Place SPL there, and switch U-Boot from .bin to .img format, stored in NOR Flash at 0xFFF90000. Note: this patch was tested on HW and works, i.e. it boots U-Boot properly, but SPL console output currently does not appear, due to GD being trashed by arch/arm/lib/spl.c. This trashing is soon to be removed, and then ED Mini V2 SPL console output will become visible. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | sunxi: Add Wexler TAB7200 supportAleksei Mamlin2015-03-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | This patch add support for Wexler TAB7200 tablet. The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Ippo_q8h defconfigs: Enable otg vbus detection using AXP223 PMICChen-Yu Tsai2015-03-10-0/+2
| | | | | | | | | | | | | | | | Use the AXP223 PMIC to detect VBUS for musb otg support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sun7i: Add support for the Orange Pi Mini boardHans de Goede2015-03-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | The Orange Pi Mini is an A20 based development board featuring 1G RAM, HDMI, 1Gbit ethernet, USB wifi, SATA, 2 sdcard slots (use the top one for booting), 2 USB 2.0 A receptacles, a micro USB B receptacle (otg) and a 3 ring 3.5 mm jack connector for A/V. Also see: http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sun7i: Add support for the Orange Pi boardHans de Goede2015-03-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | The Orange Pi is an A20 based development board featuring 1G RAM, HDMI & VGA, 1Gbit ethernet, USB wifi, SATA, 4 USB 2.0 A receptacles, a micro USB B receptacle (otg) and a 3 ring 3.5 mm jack connector for A/V. Also see: http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sun7i: Add support for the Wits Pro A20 DKT boardHans de Goede2015-03-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors. Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0. Also see: http://www.merrii.com/en/pla_d.asp?id=163 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: Add support for the Forfun Q88DB tabletJens Lucius2015-03-10-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | The Forfun Q88DB is an A13 tablet in the common Q8 format. Features are 512MB RAM, 4GB NAND, 7" Display, RTL8188 Wifi, 2 cameras. For more details see: http://linux-sunxi.org/Forfun_Q88DB Signed-off-by: Jens Lucius <info@jenslucius.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-11-06 17:34:13 +0000