summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-02-21-0/+2
|\
| * imx: mx7d: isolate resources to domain 0 for A7 corePeng Fan2016-02-21-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current design, if any peripheral was assigned to both A7 and M4, it will receive ipg_stop or ipg_wait when any of the 2 platforms enter low power mode. We will have a risk that, if A7 enter wait, M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait asserted same time. Also if M4 enters stop mode, A7 will have no chance to access the peripheral. There are 26 peripherals affected by this IC issue: SIM2(sim2/emvsim2) SIM1(sim1/emvsim1) UART1/UART2/UART3/UART4/UART5/UART6/UART7 SAI1/SAI2/SAI3 WDOG1/WDOG2/WDOG3/WDOG4 GPT1/GPT2/GPT3/GPT4 PWM1/PWM2/PWM3/PWM4 ENET1/ENET2 Software Workaround: The solution is to set the peripherals to Domain0 by A core, since A core in Domain0. The peripherals which will be used by M4, will be set to Domain1 by M4. For example, A core set WDOG4 to domain0, but when M4 boots up, M4 will set WDOG4 to domain1, because M4 will use WDOG4. So the peripherals are not shared by them. This way requires the uboot implemented the RDC driver and set the 26 IPs above to domain 0 only. M4 image will set the M4 to domain 1 and set peripheral which it will use to domain 1. This patch enables the CONFIG_IMX_RDC and CONFIG_IMX_BOOTAUX for i.MX7D SABRESD board, and setup the 26 IP resources to domain 0. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | x86: Add Intel Cougar Canyon 2 boardBin Meng2016-02-21-0/+20
| | | | | | | | | | | | | | | | | | This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-02-20-1/+28
|\ \
| * | ARM: Add Support for the VInCo platformGregory CLEMENT2016-02-19-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with: - an RS-485 port - 2 Ethernet ports - a wireless M-BUS - a 4G modem - a 4MB SPI flash - a 4GB eMMC Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> [rebase on current TOT] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | arm: at91: Add support for DENX MA5D4 SoM and EVKMarek Vasut2016-02-18-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI CAN controllers and DRAM, the baseboard contains UART connectors, ethernet port, microSD slot, LCD header, 2x CAN connector and a lot of expansion headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | siemens,at91: enable features for smartwebMatthias Michel2016-02-18-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New features for smartweb: * switch to hush command parser * change autoboot stop to <ESC><ESC> * allow to write ethaddr Signed-off-by: Matthias Michel <matthias.michel@siemens.com> Reviewed-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | arc: cache - accommodate different L1 cache line lengthsAlexey Brodkin2016-02-20-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARC core could be configured with different L1 and L2 (AKA SLC) cache line lengths. At least these values are possible and were really used: 32, 64 or 128 bytes. Current implementation requires cache line to be selected upon U-Boot configuration and then it will only work on matching hardware. Indeed this is quite efficient because cache line length gets hardcoded during code compilation. But OTOH it makes binary less portable. With this commit we allow U-Boot to determine real L1 cache line length early in runtime and use this value later on. This extends portability of U-Boot binary a lot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | tegra: Convert CONFIG_PWM_TEGRA to KconfigSimon Glass2016-02-16-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Move this option to Kconfig and clean up the header files. Adjust the only user (the LCD driver) to work with the new driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | tegra: video: Convert tegra20 LCD driver to driver modelSimon Glass2016-02-16-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move this driver over to use driver model. This involves rearranging the code somewhat. The effect is that everything is run from the probe() method. Boards which use this are fixed up, but only seaboard is tested. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20Simon Glass2016-02-16-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option refers only to the tegra20 video driver, so name it as such to avoid confusion with tegra124. Also move this option to Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | tegra: nyan-big: Move the LCD driver to driver modelSimon Glass2016-02-16-0/+9
|/ / | | | | | | | | | | | | | | | | | | Adjust the driver to use driver model. The SOR becomes a bridge device. We use the normal simple_panel driver to handle the display itself. We also need to enable some options such as regulators, PWMs and DM_VIDEO itself. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-02-14-0/+4
|\ \
| * | ARM: uniphier: switch over to generic EHCI driverMasahiro Yamada2016-02-14-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UniPhier EHCI driver (drivers/usb/host/ehci-uniphier.c) does nothing special but set the base address and handle reset/clock. Since commit 4feefdcfe916 ("usb: add clock support for generic EHCI"), the generic one (drivers/usb/host/ehci-generic.c) can do those, too. We no longer need to stick to the dedicated driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | zynqmp: nand: Add Nand driver support for zynqmpSiva Durga Prasad Paladugu2016-02-12-0/+1
|/ / | | | | | | | | | | | | | | | | | | Add nand driver support for zynqmp. The Nand controller used in ZynqMP is Arasan Nand Flash controller. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> [scottwood: Fix checkpatch warning] Signed-off-by: Scott Wood <oss@buserror.net>
* | defconfig: k2g_evm_defconfig: enable net driver modelMugunthan V N2016-02-08-0/+1
| | | | | | | | | | | | | | | | | | enable net driver model for k2g evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | defconfig: k2e_evm_defconfig: enable net driver modelMugunthan V N2016-02-08-0/+1
| | | | | | | | | | | | | | | | | | enable net driver model for k2e evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | defconfig: k2l_evm_defconfig: enable net driver modelMugunthan V N2016-02-08-0/+1
| | | | | | | | | | | | | | | | | | enable net driver model for k2l evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | defconfig: k2hk_evm_defconfig: enable net driver modelMugunthan V N2016-02-08-0/+1
| | | | | | | | | | | | | | | | | | enable net driver model for k2hk evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | OMAP3_LOGIC: Setup defconfig to enable SPL and NAND bootingAdam Ford2016-02-08-0/+3
| | | | | | | | | | | | | | | | | | | | The defconfig patch will enable the the SPL and NAND settings. The update to Kconfig will allow the SPL to configured in and built. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2016-02-08-4/+1
|\ \
| * | ppc: xilinx-ppc405-genericRicardo Ribalda2016-02-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix device tree name: +(xilinx-ppc405-generic) Device Tree Source is not correctly specified. +(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE' +(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>' argument +(xilinx-ppc405-generic) make[2]: *** [arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1 +(xilinx-ppc405-generic) make[1]: *** [dts] Error 2 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | rockchip: Drop old CONFIG_VIDEO_ROTATION optionSimon Glass2016-02-06-3/+0
| |/ | | | | | | | | | | | | | | | | | | The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards were not updated. However this option is is not needed by default for Rockchip since we don't need a rotated console for current boards. So just remove the old option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | x86: chromebox_panther: Convert to use driver model ethernetBin Meng2016-02-05-0/+1
| | | | | | | | | | | | | | This board uses RTL8169 which is a driver model ethernet driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | efi: app: Clean up defconfigBin Meng2016-02-05-1/+1
|/ | | | | | | | Move some #undef from efi-x86.h to efi-x86_defconfig as these are already Kconfig options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: vybrid: Update defconfig'sBhuvanchandra DV2016-02-02-14/+29
| | | | | | | | | | | | | | | | Let's go with pure DT solution for board's based on NXP/Freescale Vybrid platform. - Merge the DT defconfig with non-DT defconfig for Toradex Colibri VF50/VF61 and drop the non-DT defconfig. - Update the legacy defconfigs for NXP/Freescale VF610 Tower Board with DT. - Update the legacy defconfigs for Phytec phyCORE-vybrid Board with DT. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO boardYe Li2016-02-02-0/+11
| | | | | | | Initial version for mx6sx SABREAUTO board support with features: PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander. Signed-off-by: Ye Li <ye.li@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-02-02-0/+2
|\
| * board: atmel: sama5d2_xplained: add SPL supportWenyou Yang2016-02-02-0/+2
| | | | | | | | | | | | | | | | The sama5d2 Xplained SPL supports the boot medias: spi flash and SD Card. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | board: Enable ethernet, tftpboot support to pic32mzdask board.Purna Chandra Mandal2016-02-01-3/+6
| | | | | | | | | | | | | | This adds ethernet, TFTP support for PIC32MZ[DA] Starter Kit. Also custom environment variables/scripts are added to help boot from network. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
* | board: add SDHCI support for PIC32MZDASK board.Purna Chandra Mandal2016-02-01-1/+2
| | | | | | | | | | | | | | Enable MMC, SDHCI, FAT_FS support for PIC32MZ[DA] StarterKit. Also add custom scripts, rules to boot Linux from microSD card. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
* | board: Add Microchip PIC32MZ[DA]-Starter-Kit board.Purna Chandra Mandal2016-02-01-0/+30
| | | | | | | | | | | | | | | | This adds support for Microchip PIC32MZ[DA] StarterKit board based on a PIC32MZ[DA] family of microcontroller. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | video: sandbox: Enable truetype fonts for sandboxSimon Glass2016-01-30-0/+2
| | | | | | | | | | | | | | | | Enable this feature so that truetype fonts can be used on the sandbox console. Update the tests to select the normal/rotated console when needed. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | video kconfig console_normalSimon Glass2016-01-30-1/+1
| | | | | | | | | | | | Signed-off-by: Simon Glass <sjg@chromium.org> [agust: rebased on current master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-1/+48
|\ \
| * | armv8/ls1043aqds: add QSPI boot supportQianyu Gong2016-01-27-0/+9
| | | | | | | | | | | | | | | | | | | | | Enable the U-Boot Driver Model(DM) to use the Freescale QSPI driver. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: add QSPI support in SD bootGong Qianyu2016-01-27-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | QSPI and IFC are pin-multiplexed on LS1043A. So we use ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: add DSPI supportGong Qianyu2016-01-27-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable three DSPI flash memories on board. Commands: => sf probe 1:0 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB => sf probe 1:1 SF: Detected SST25WF040B with page size 256 Bytes, erase size 4 KiB, total 512 KiB => sf probe 1:2 SF: Detected EN25S64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: Add lpuart supportWenbin Song2016-01-27-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Add lpuart support using the driver model. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: Spilt off board device treeWenbin Song2016-01-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Move new /chosen node out of the board device tree. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-01-27-75/+52
|\ \ \
| * | | ppc: xilinx-ppc440-generic: Wire LL_TEMAC driverRicardo Ribalda Delgado2016-01-27-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the xparameters file contains a LL_TEMAC definition compile its driver and the net commands. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
| * | | ppc: xilinx-ppc4xx: Port to DM serialRicardo Ribalda Delgado2016-01-27-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xilinx_uartlite has been ported to DM, this patch makes the xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new DM driver. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Fix defconfig for zyboMichal Simek2016-01-27-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Change possition of SPI_FLASH to by align with savedefconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Move FLASH_BAR to KconfigMichal Simek2016-01-27-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Clean up config and use Kconfig more. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Enable SPI_FLASH for zc770 xm013 platformMichal Simek2016-01-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Define sys prompt for all Zynq boardsSiva Durga Prasad Paladugu2016-01-27-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define CONFIG_SYS_PROMPT for all Zynq boards It was removed by: "kconfig: add config option for shell prompt" (sha1: 181bd9dc61d2da88b78f1c1138a685dae39354d6) Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | microblaze: Enable HUSH via KconfigMichal Simek2016-01-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Cleanup board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | microblaze: Move CONFIG_NETCONSOLE to KconfigMichal Simek2016-01-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Cleanup board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | microblaze: Remove CONFIG_FIT from board fileMichal Simek2016-01-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | And enable it via defconfig by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-11-09 13:52:40 +0000