summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* arm: socfpga: socrates: Add 'time' commandStefan Roese2016-05-06-0/+1
| | | | | | | | The time command is very helpful for performance and regressions tests. So lets enable it on SoCrates. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de>
* sunxi: Enable LDO3 at 3.3V on A13-OLinuXino boardHans de Goede2016-04-27-0/+1
| | | | | | | | LDO3 is used for the VGA output, this fixes a regression where the VGA output on these boards would no longer work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* ARM: uniphier: revive some commands lost by Kconfig re-syncMasahiro Yamada2016-04-26-0/+2
| | | | | | | The recently added uniphier_ld20_defconfig missed the tree-wide re-sync by commit 89cb2b5f8be4 ("configs: Re-sync with cmd/Kconfig"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pico-imx6ul: Update the defconfigTom Rini2016-04-25-1/+18
| | | | | | | | | The defconfig/config.h file were merged but were already out of sync with mainline. This brings them further into line now. Cc: Richard Hu <richard.hu@technexion.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.Peter Griffin2016-04-25-0/+1
| | | | | | | | | | | Currently only the serial pl01x driver is using DT, and the other drivers still use platform data but as more DT lands in the upstream kernel the aim is to migrate the other drivers over to DT as well to have a fully DT configured hikey u-boot. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync with cmd/KconfigTom Rini2016-04-25-0/+5125
| | | | | | | Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync almost all of cmd/KconfigTom Rini2016-04-25-4/+4343
| | | | | | | | This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync CONFIG_USB_MUSB_HOSTTom Rini2016-04-25-0/+23
| | | | | | | Now that CONFIG_USB_MUSB_HOST is part of Kconfig, migrate that over to the defconfig files. Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync HUSH optionsTom Rini2016-04-25-36/+908
| | | | | | | Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-uniphierTom Rini2016-04-25-0/+28
|\
| * ARM: uniphier: add PH1-LD20 SoC supportMasahiro Yamada2016-04-24-0/+28
| | | | | | | | | | | | This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-04-25-0/+5
|\ \ | |/ |/|
| * Add initial support for Technexion's PICO-IMX6UL-EMMC boardFabio Estevam2016-04-19-0/+5
| | | | | | | | | | | | | | | | | | | | Add support for Technexion's PICO-IMX6UL-EMMC board. For information about this board, please visit: http://www.technexion.com/products/pico/pico-som/pico-imx6-emmc Signed-off-by: Richard Hu <richard.hu@technexion.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | configs: Update some Xilinx configsTom Rini2016-04-20-0/+29
| | | | | | | | | | | | As part of 3457bba these configs didn't get updated. Update them now. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-04-20-14/+535
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: configs/bcm28155_ap_defconfig configs/dra72_evm_defconfig configs/dra74_evm_defconfig configs/ma5d4evk_defconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * | usb: gadget Move: CONFIG_G_DNL_* to KconfigSam Protsenko2016-04-20-0/+276
| | | | | | | | | | | | | | | | | | And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to KconfigSam Protsenko2016-04-20-0/+13
| | | | | | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | usb: dwc3: Move CONFIG_USB_DWC3_OMAP to KconfigSam Protsenko2016-04-20-0/+12
| | | | | | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to KconfigSam Protsenko2016-04-20-0/+14
| | | | | | | | | | | | | | | | | | Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to KconfigSam Protsenko2016-04-20-0/+92
| | | | | | | | | | | | | | | | | | | | | While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * | usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-20-12/+126
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* | bx50v3: Enable CONFIG_OF_LIBFDT in defconfigAkshay Bhat2016-04-18-0/+3
| | | | | | | | | | | | | | | | As of commit 69e173eb57d1f4848f070c83456096ba5d2ba1b4, CONFIG_OF_LIBFDT needs to be selected in defconfig instead of board specific header file. Hence enable CONFIG_OF_LIBFDT in defconfig. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
* | configs: ks2: move CMD_NAND to defconfigsLokesh Vutla2016-04-18-0/+3
| | | | | | | | | | | | | | | | | | NAND is not yet enabled on all Keystone2 platforms. So enabled CMD_NAND in the respective defconfigs only if available. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | memory: Move TI_AEMIF config to KCONFIGLokesh Vutla2016-04-18-0/+3
| | | | | | | | | | | | | | | | | | | | Not all Keystone2 devices has AEMIF NAND controller. So adding Kconfig entry for CONFIG_TI_AEMIF and enabling it in respective defconfigs on platforms with AEMIF controller. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | am57x: Move CONS_INDEX to KconfigDaniel Allred2016-04-18-2/+0
| | | | | | | | | | | | | | | | | | | | - Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper. - Edit the relevant am57x configs to remove the now unneeded CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | kconfig: Move CONFIG_OF_LIBFDT to KconfigMichal Simek2016-04-18-1/+11
| | | | | | | | | | | | | | | | | | | | This patch follows work done by: "Move CONFIG_OF_LIBFDT to Kconfig" (sha1: 69e173eb57d1f4848f070c83456096ba5d2ba1b4) Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Add xpress* to the patch] Signed-off-by: Tom Rini <trini@konsulko.com>
* | bcm281xx: enable CONFIG_OF_LIBFDTSteve Rae2016-04-18-0/+1
| | | | | | | | | | | | set the Kconfig parameter: CONFIG_OF_LIBFDT Signed-off-by: Steve Rae <srae@broadcom.com>
* | configs: dra74_evm: enable mmc driver modelMugunthan V N2016-04-18-0/+1
| | | | | | | | | | | | | | | | enable mmc driver model for dra74 evm as omap_hsmmc supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: dra72_evm: enable mmc driver modelMugunthan V N2016-04-18-0/+1
|/ | | | | | | | enable mmc driver model for dra72 evm as omap_hsmmc supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sandbox: Enable many more commandsTom Rini2016-04-15-6/+57
| | | | | | | | | | | | - Set CONFIG_SYS_CACHELINE_SIZE to ARCH_DMA_MINALIGN as that should be good enough. - Make <asm/io.h> include <asm/types.h> like other arches do - Enable many many more drivers in sandbox_defconfig so that we can get more build-time testing on this platform. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-04-13-0/+176
|\
| * ARM64: zynqmp: Use i2c cadence DM driverMichal Simek2016-04-13-0/+12
| | | | | | | | | | | | | | | | Use i2c cadence DM driver for all zynqmp targets except ZCU102 because I2C muxes and PCA953x are not supported in the tree yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108Michal Simek2016-04-13-0/+2
| | | | | | | | | | | | Enable missing GPIO options. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add support for zc1751 with DC cardsMichal Simek2016-04-13-0/+87
| | | | | | | | | | | | Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add defconfig for zcu102 revB boardMichal Simek2016-04-13-0/+34
| | | | | | | | | | | | | | | | Support natively revB board. Till now support for revB was done via zcu102 defconfig where device-tree was changed to revB. This patch is adding direct defconfig for RevB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add support for ZCU102 platformMichal Simek2016-04-13-0/+34
| | | | | | | | | | | | Add new board support. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Extend early malloc space to be able to run DM driversMichal Simek2016-04-13-0/+1
| | | | | | | | | | | | | | DM drivers need more malloc space for early DM models allocation. Use 4k instead of 1k. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boardsMichal Simek2016-04-13-0/+2
| | | | | | | | | | | | | | There are mini configurations which need to be fit to OCM that's why these options shouldn't be enabled by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM: zynq: Extend microzed board supportMichal Simek2016-04-13-0/+4
| | | | | | | | | | | | | | Add missing DT nodes and enable USB. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-04-13-4/+54
|\ \
| * | arm: mxs: Update MX28EVK configMarek Vasut2016-04-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable FIT image support, EXT4 support and generic FS support. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | imx: mx7d: move MX7D to Kconfig entryPeng Fan2016-03-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX7D" to boards using i.MX7 Dual. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | imx: mx6sx: move MX6SX to Kconfig entryPeng Fan2016-03-26-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX6SX" to boards using i.MX6 SoloX. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | arm: mx6: Add CCV xPress board supportStefan Roese2016-03-26-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the CCV xPress board which is equipped with the i.MX6UL. And provides the following interfaces: - 128MiB DDR - UART - I2C - eMMC (with booting) - Ethernet - USB This patch adds two build targets. One with and one without SPL. The non-SPL version is used for loading U-Boot via USB (imx_usb_loader). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | warp7: Add initial supportFabio Estevam2016-03-26-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * | Merge branch 'next'Stefano Babic2016-03-20-0/+24
| |\ \
| | * | arm: imx: Add support for GE Bx50v3 boardsAkshay Bhat2016-03-09-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for GE B450v3, B650v3 and B850v3 boards. The boards are based on Advantech BA16 module which has a i.MX6D processor. The boards support: - FEC Ethernet - USB Ports - SDHC and MMC boot - SPI NOR - LVDS and HDMI display Basic information about the module: - Module manufacturer: Advantech - CPU: Freescale ARM Cortex-A9 i.MX6D - SPECS: Up to 2GB Onboard DDR3 Memory; Up to 16GB Onboard eMMC NAND Flash Supports OpenGL ES 2.0 and OpenVG 1.1 HDMI, 24-bit LVDS 1x UART, 2x I2C, 8x GPIO, 4x Host USB 2.0 port, 1x USB OTG port, 1x micro SD (SDHC),1x SDIO, 1x SATA II, 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | | | sunxi: Add defconfig and dts file for Orange Pi One SBCHans de Goede2016-04-12-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Orange Pi One SBC, is a stripped down version of the popular Orange Pi PC. The one is a H3 based SBC, with 512M of RAM, micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | | sunxi: Enable CMD_GPIO on all sunxi boardsHans de Goede2016-04-12-83/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after its Kconfig conversion it has ended up missing on some recently added boards. Simply select it for ARCH_SUNXI, so that we get it on all sunxi boards for both a consistent user experience and simpler defconfig files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | | sunxi: Enable usb ports on the Sinovoip BPI M3Hans de Goede2016-04-12-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DLDO3 is used to provide Port-D power and PD is used for the usb-hub / sata-5v enable pins. The 2.5V comes from the schematic and matches the factory image fex file. The dts changes are the minimal changes needed for u-boot to pick-up the usb host controllers. The upstream kernel does not (yet) have usb host support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-10-30 10:30:19 +0000