summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* Merge git://git.denx.de/u-boot-rockchipTom Rini2015-09-03-0/+85
|\
| * rockchip: Turn off CONFIG_SPL_LED for fireflySjoerd Simons2015-09-02-1/+0
| | | | | | | | | | | | | | | | | | | | With LED support enabled the SPL easily goes over the size limit (e.g. with both Debians gcc 4.9 and 5.2 cross-compilers). Turn off LED support in the SPL to reduce the size just enough for those compilers. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tweaked commit subject to remove _SUPPORT Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add basic support for jerrySimon Glass2015-09-02-0/+43
| | | | | | | | | | | | This builds and displays an SPL message, but does not function beyond that. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add basic support for firefly-rk3288Simon Glass2015-09-02-0/+43
| | | | | | | | | | | | | | | | | | | | | | The Firefly RK3288 is a suitable target board for initial mainline Rockchip support. It includes a good set of peripherals, a recent SoC and it is readily available. This adds only some basic files required to allow the baord to display a serial message in SPL and hang. Signed-off-by: Simon Glass <sjg@chromium.org>
* | configs/titanium_defconfig: Select MX6Tom Rini2015-09-02-0/+1
| | | | | | | | | | | | In 2178282 this config wasn't updated by accident, so update it. Signed-off-by: Tom Rini <trini@konsulko.com>
* | powerpc: mpc85xx: remove stxgp3, stxssa supportMasahiro Yamada2015-09-02-15/+0
| | | | | | | | | | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Dan Malek <dan@embeddedalley.com>
* | powerpc: mpc5xx: remove cmi_mpc5xx supportMasahiro Yamada2015-09-02-6/+0
| | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | powerpc: ppc4xx: remove zeus supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove sbc405 supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | powerpc: ppc4xx: remove pcs440ep supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove p3p440 supportMasahiro Yamada2015-09-02-4/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove lwmon5 supportMasahiro Yamada2015-09-02-10/+0
| | | | | | | | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Remove CONFIG_LWMON5 references. (Also, remove undefined CONFIG_WD_MAX_RATE while I am here.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | powerpc: ppc4xx: remove csb272, csb472 supportMasahiro Yamada2015-09-02-8/+0
| | | | | | | | | | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
* | powerpc: ppc4xx: remove alpr supportMasahiro Yamada2015-09-02-7/+0
| | | | | | | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-09-02-0/+5
|\ \
| * | powerpc/defconfig: Rename defconfig file for T1040QDS/T1024QDS DDR4 targetsYork Sun2015-09-01-0/+0
| | | | | | | | | | | | | | | | | | | | | Previously the DDR4 targets were named with _D4. Rename them with _DDR4 for easy identification. Signed-off-by: York Sun <yorksun@freescale.com>
| * | powerpc/t1024qds: Add missing T1024QDS_DDR4_defconfigYork Sun2015-09-01-0/+5
| |/ | | | | | | | | | | | | T1024QDS with DDR4 has been supported. Add the missing defconfig. Signed-off-by: York Sun <yorksun@freescale.com> CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-09-02-10/+69
|\ \
| * | arm: mx6: cm-fx6: switch to usb kbd polling via int queueNikita Kiryanov2015-09-02-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE works better than CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP (keyboards that previously didn't work such as Microsoft Comfort Curve 1000 now do work, and it's also faster). Switch to CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | arm, imx6: add aristainetos 2b board versionHeiko Schocher2015-09-02-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | there is a 2b board version of the aristainetos2 board. Differences to the v2: - spi cs for the nor flash and display controller changed - some pinmux changes - LED gpio settings changed Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6ul_14x14_evk discard MX6UL from CONFIG_SYS_EXTRA_OPTIONSPeng Fan2015-09-02-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Discard MX6UL from CONFIG_SYS_EXTRA_OPTIONS, since we default select MX6UL for mx6ul_14x14_evk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: mx6slevk: add SPL supportPeng Fan2015-09-02-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPL boot support for mx6slevk board. 1. Introduce a configuration file mx6slevk_spl_defconfig. 2. i.MX6SL has same DRAM space with i.MX6SX, need to change SPL DRAM SPACE. 3. Include imx6_spl.h and related SPL macro in mx6slevk.h. 4. select SUPPORT_SPL for TARGET_MX6SLEVK. 5. Add SPL board code to do related initialization. Boot Log: U-Boot SPL 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59 +0000) CPU: Freescale i.MX6SL rev1.2 996 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONSSoeren Moch2015-09-02-1/+0
| | | | | | | | | | | | | | | | | | move options from CONFIG_SYS_EXTRA_OPTIONS to board specific Kconfig Signed-off-by: Soeren Moch <smoch@web.de>
| * | imx: mx6ul_14x14_evk add ENET supportPeng Fan2015-09-02-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add enet support for mx6ul_14x14_evk board: 1. add pinmux settings 2. implement board_eth_init 3. implement board_phy_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig filePeng Fan2015-09-02-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig. Add enable "CONFIG_ARCH_MX6" for boards based on mx6. Then we can choose target boards using "make ARCH=arm menuconfig" with ARCH_MX6 defined. If using original way, we have no chance to enable ARCH_MX6 when "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig, kconfig will complains "arch/../configs/platinum_titanium_defconfig:3: warning: override: TARGET_PLATINUM_TITANIUM changes choice state" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Bénard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Marek Vasut <marex@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Soeren Moch <smoch@web.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Soeren Moch <smoch@web.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * | ARM: ts4800: add basic board supportLucile Quirion2015-09-02-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console, TS4800 watchdog The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second stage bootloader. Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
| * | arm: mx6: Remove SPI support from WRU-IV baseboardStefan Roese2015-09-02-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the SPI support from the WRU-IV baseboard as its not used at all. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * | udoo: Switch to SPL supportvpeter42015-09-02-5/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | armv8/ls2085a_emu: Drop DDR3 emulation targetYork Sun2015-09-01-15/+1
|/ | | | | | | | The emulator with DDR3 model was used during model bringup. DDR4 controllers are used with ls2085a. Drop the DDR4 target defconfig and enable DDR4 in ls2085a_emu_defconfig. Signed-off-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-08-31-2/+91
|\
| * sunxi: Add support for the Olimex A20 EVBMarcus Cooper2015-08-31-0/+16
| | | | | | | | | | | | Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Add inet98v_rev2 defconfig and dts fileHans de Goede2015-08-31-0/+22
| | | | | | | | | | | | | | | | | | | | | | The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add inet97fv2_defconfigHans de Goede2015-08-31-0/+20
| | | | | | | | | | | | | | | | | | | | | | The inet97fv2 is a board found in the first generation of cheap allwinner A10 based 7" tablets. Note that this patch does not add a dts file as we already have one from our dts syncs with the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Ampe_A76_defconfig: Add otg id pin configurationHans de Goede2015-08-31-0/+1
| | | | | | | | | | | | | | | | Add otg id pin configuration, this speeds up bootup when no host cable is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add CONFIG_MMC0_CD_PIN to various boardsHans de Goede2015-08-31-0/+6
| | | | | | | | | | | | | | | | | | Add CONFIG_MMC0_CD_PIN to various boards, this stops the SPL from still trying to access the sdcard when there is none (e.g. when booting from nand). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigsHans de Goede2015-08-31-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the unified / cleaned up default display output selection changes, which were done as part of adding composite video out support, our example LCD_MODE line in the A13-OLinuxIno defconfigs causes the display code to setup a LCD console by default, rather then a VGA console. Given that the LCD console is only useful for people who have hooked up the exact lcd-panel from the config, while most people will not have any lcd panel connected to these boards, this is not a good default. Dropping the LCD_MODE line which was intended as an example fixes this, instead add a link to the LCD_MODE help text pointing to http://linux-sunxi.org/LCD which contains the removed and other example modes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: Add support for gt90h-v4 tabletsHans de Goede2015-08-31-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. The pmic setup on this board is somewhat special, dcdc2 MUST be set to 1.1V instead of the usual 1.2V otherwise the board is very unstable. aldo1 is used to power the micro sd slot, dldo1 is used for wifi. This commit adds a defconfig + dts (as submitted to the kernel) for the gt90h-v4 pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | pinctrl: sandbox: add sandbox pinctrl driverMasahiro Yamada2015-08-31-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver actually does nothing but test pinctrl uclass, and demonstrate how things work. To try this driver, uncomment /* #define DEBUG */ in the drivers/pinctrl/pinctrl-sandbox.c, and debug messages will be displayed. DRAM: 128 MiB sandbox pinmux: group = 1 (serial_a), function = 1 (serial) Using default environment In: cros-ec-keyb Out: lcd Err: lcd Net: Net Initialization Skipped eth0: eth@10002000, eth1: eth@80000000, eth5: eth@90000000 => i2c dev 0 Setting bus to 0 sandbox pinmux: group = 0 (i2c), function = 0 (i2c) sandbox pinconf: group = 0 (i2c), param = 3, arg = 1 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* | tegra: nyan: Enable TPM command and driverSimon Glass2015-08-31-0/+5
| | | | | | | | | | | | | | | | | | The TPM is listed in the device tree. Enable the driver and 'tpm' command so that it can be used. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | tpm: Enable 'tpmtest' command for Chrome OS boards with TPMsSimon Glass2015-08-31-0/+8
| | | | | | | | | | | | | | | | This command provides a few useful tests so enable it for common boards. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | dm: tpm: Convert LPC driver to driver modelSimon Glass2015-08-31-0/+6
| | | | | | | | | | | | | | | | | | Convert the tpm_tis_lpc driver to use driver model and update boards which use it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | dm: tpm: Convert I2C driver to driver modelSimon Glass2015-08-31-0/+4
| | | | | | | | | | | | | | | | | | Convert the tpm_tis_i2c driver to use driver model and update boards which use it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | dm: tpm: sandbox: Convert TPM driver to driver modelSimon Glass2015-08-31-0/+1
| | | | | | | | | | | | | | | | | | Convert the sandbox TPM driver to use driver model. Add it to the device tree so that it can be found on start-up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | tpm: Convert board config TPM options to KconfigSimon Glass2015-08-31-0/+36
|/ | | | | | | | Convert all TPM options to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* ARM: uniphier: select SPL_DM rather than default in defconfigMasahiro Yamada2015-08-30-4/+0
| | | | | | Now UniPhier SoCs highly depend on Driver Model for SPL, too. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* picosam9g45: adopt CONFIG_SYS_PROMPTAndreas Bießmann2015-08-28-0/+1
| | | | | | | | Commit 181bd9dc61d2da88b78f1c1138a685dae39354d6 introduced Kconfig selection for SYS_PROMPT. When applying the new picosam9g45 board this change slipped through, adopt it. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* NDS32: Generic Board Support and UnsupportKun-Hua Huang2015-08-28-10/+0
| | | | | | Remove ag101 and ag102 support Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
* arm: mvebu: Enable NAND on db-mv784mp-gpStefan Roese2015-08-25-0/+1
| | | | | | | | | This patch enables NAND support on the Marvell Armada XP DB-MV784MP-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter Morrow <peter@senient.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-08-23-7/+13
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: configs/socfpga_arria5_defconfig configs/socfpga_cyclone5_defconfig configs/socfpga_socrates_defconfig Merged these by hand and re-ran savedefconfig on them. Signed-off-by: Tom Rini <trini@konsulko.com>
| * arm: socfpga: Enable ethernet on ArriaV SoCDKMarek Vasut2015-08-23-0/+3
| | | | | | | | | | | | | | Synchronise the config options with Cyclone V SoCDK and other boards. This enables ethernet on the ArriaV SoCDK. Signed-off-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-09 06:23:23 +0000