summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=yTom Rini2015-03-20-0/+1
| | | | | | | This flag was missing and thus the board was totally being configured wrong. Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: at91: at91sam9rlek: add hush parser to defconfigWu, Josh2015-03-18-0/+3
| | | | | | | | HUSH parser will handle the variable easier. That will be helpful for write a complicated U-Boot commands or varaibles. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com>
* ARM: at91: at91sam9rlek: add mmc environment configurationWu, Josh2015-03-18-0/+3
| | | | | | | Add a mmc default config, which will save the environment in a FAT file (uboot.env) of MMC. Signed-off-by: Josh Wu <josh.wu@atmel.com>
* powerpc: ppc4xx: remove korat board supportMasahiro Yamada2015-03-17-7/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Larry Johnson <lrj@acm.org>
* powerpc: mpc5xxx: remove galaxy5200 board supportMasahiro Yamada2015-03-17-8/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Eric Millbrandt <emillbrandt@dekaresearch.com>
* powerpc: ppc4xx: remove W7OLMC/W7OLMG board supportMasahiro Yamada2015-03-17-6/+0
| | | | | | | | They have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Erik Theisen <etheisen@mindspring.com>
* powerpc: mpc5xxx: remove aev, TB5200 board supportMasahiro Yamada2015-03-17-10/+0
| | | | | | | They have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove JSE board supportMasahiro Yamada2015-03-17-3/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stephen Williams <steve@icarus.com>
* powerpc: mpc5xxx: remove BC3450 board supportMasahiro Yamada2015-03-17-3/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* odroid: defconfig: fix build break caused by missing dtsPrzemyslaw Marczak2015-03-17-0/+1
| | | | | | | | | | | | The build break was caused by one of my previous commit: 'odroid: defconfig: disable memset at malloc init' It removes the dts from odroid defconfig - rebase mistake. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* kconfig: remove meaningless prefixes in defconfig filesMasahiro Yamada2015-03-15-1013/+1013
| | | | | | | | | | | | Since commit e02ee2548afe (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-03-10-3/+4
|\ | | | | | | | | | | | | Conflicts: README Signed-off-by: Tom Rini <trini@konsulko.com>
| * edminiv2: switch to SPLAlbert ARIBAUD2015-02-25-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ED Mini V2 is based on Orion 5x which boots at fixed address 0xFFFF0000 in NOR Flash. Place SPL there, and switch U-Boot from .bin to .img format, stored in NOR Flash at 0xFFF90000. Note: this patch was tested on HW and works, i.e. it boots U-Boot properly, but SPL console output currently does not appear, due to GD being trashed by arch/arm/lib/spl.c. This trashing is soon to be removed, and then ED Mini V2 SPL console output will become visible. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | sunxi: Add Wexler TAB7200 supportAleksei Mamlin2015-03-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | This patch add support for Wexler TAB7200 tablet. The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Ippo_q8h defconfigs: Enable otg vbus detection using AXP223 PMICChen-Yu Tsai2015-03-10-0/+2
| | | | | | | | | | | | | | | | Use the AXP223 PMIC to detect VBUS for musb otg support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sun7i: Add support for the Orange Pi Mini boardHans de Goede2015-03-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | The Orange Pi Mini is an A20 based development board featuring 1G RAM, HDMI, 1Gbit ethernet, USB wifi, SATA, 2 sdcard slots (use the top one for booting), 2 USB 2.0 A receptacles, a micro USB B receptacle (otg) and a 3 ring 3.5 mm jack connector for A/V. Also see: http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sun7i: Add support for the Orange Pi boardHans de Goede2015-03-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | The Orange Pi is an A20 based development board featuring 1G RAM, HDMI & VGA, 1Gbit ethernet, USB wifi, SATA, 4 USB 2.0 A receptacles, a micro USB B receptacle (otg) and a 3 ring 3.5 mm jack connector for A/V. Also see: http://www.orangepi.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sun7i: Add support for the Wits Pro A20 DKT boardHans de Goede2015-03-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors. Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0. Also see: http://www.merrii.com/en/pla_d.asp?id=163 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | sunxi: Add support for the Forfun Q88DB tabletJens Lucius2015-03-10-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | The Forfun Q88DB is an A13 tablet in the common Q8 format. Features are 512MB RAM, 4GB NAND, 7" Display, RTL8188 Wifi, 2 cameras. For more details see: http://linux-sunxi.org/Forfun_Q88DB Signed-off-by: Jens Lucius <info@jenslucius.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
* | sun6i: Add support for the Mele I7 boardMarcus Cooper2015-03-10-0/+26
| | | | | | | | | | | | | | | | | | | | | | The Mele I7 is a Allwinner based Android TV box. It features a A31 SOC, 1G RAM, 8GB NAND, HDMI out, A/V out, SPDIF, IrDA, 3 USB A, 1 USB micro OTG and Wireless LAN. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sun7i: Add support for the MK808C boardMarcus Cooper2015-03-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | The MK808C is a Allwinner based Android TV dongle. It features a A20 SOC, 1G RAM, 8GB NAND, HDMI out, A/V out, 1 USB A, 1 USB mini OTG, Bluetooth and Wireless LAN. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add support for the Jesurun Q5 boardGábor Nyers2015-03-10-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Jesurun Q5 has a black plastic casing with the approximate dimensions of 100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The storage capacity can be extended up to 32GB with a MicroSD card. The external connectors are: 2x USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female, SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired to power) and an programmable green led. On the board there is also an unpopulated IR receiver and the UART. The devices is equipped with an AXP209 PMU. For more details see: http://linux-sunxi.org/Jesurun_Q5 Signed-off-by: Gábor Nyers <gnyers@opensuse.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | odroid-xu3: defconfig: disable memset at malloc initPrzemyslaw Marczak2015-03-09-0/+2
| | | | | | | | | | | | | | Reduce the boot time of Odroid XU3 by disabling the memset at malloc init. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
* | odroid: defconfig: disable memset at malloc initPrzemyslaw Marczak2015-03-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the boot time of Odroid X2/U3 by disabling the memset at malloc init. This was tested on Odroid X2. A quick test with checking gpio pin state using the oscilloscope. Boot time from start to bootcmd (change gpio state by memory write command): - ~228ms - before this change (arch memset enabled for .bss clear) - ~100ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | trats2: defconfig: disable memset at malloc initPrzemyslaw Marczak2015-03-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the boot time of Trats2 by disabling the memset at malloc init. This was tested on Trats2. A quick test with trace. Boot time from start to main_loop() entry: - ~464ms - before this change (arch memset enabled for .bss clear) - ~341ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-03-05-0/+13
|\ \
| * | arm: socfpga: Enable DM and DM_SPIMarek Vasut2015-03-05-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable DM and DM_SPI support for both Cyclone 5 and Arria 5 boards, since they use drivers which require those. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Vince Bridgers <vbridger@opensource.altera.com>
| * | dt: socfpga: Import and enable Arria V DK DTSMarek Vasut2015-03-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import DTS for Arria V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
| * | dt: socfpga: Import and enable Cyclone V DK DTSMarek Vasut2015-03-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import DTS for Cyclone V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
| * | arm: socfpga: Add Altera Arria V DK supportMarek Vasut2015-03-04-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Altera Arria V development kit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
* | | m68k: add amcore board supportangelo@sysam.it2015-03-05-0/+2
| | | | | | | | | | | | | | | | | | Add Sysam Amcore m68k-based board support. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* | | Adding Support for BAV335x boardsGilles Gameiro2015-03-05-0/+10
| | |
* | | omap3: add support for QUIPOS Cairo board.Albert ARIBAUD \(3ADEV\)2015-03-05-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch extends OMAP3 support for AM/DM37xx and introduces the AM3703-based Quipos Cairo board. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-03-05-0/+3
|\ \ \
| * \ \ Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-03-02-30/+322
| |\ \ \
| * | | | warp: Add initial WaRP Board supportOtavio Salvador2015-02-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | | | | ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACKSimon Glass2015-03-04-0/+14
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in some cases SDRAM init requires global_data to be available and soon this will not be available prior to board_init_f(). Adjust the code paths in these cases to be correct. In some cases we had the SPL stack be in DDR as we might have large stacks (due to Falcon Mode + Environment). In these cases switch to CONFIG_SPL_STACK_R. In other cases we had simply been setting CONFIG_SPL_STACK into SRAM. In these cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also in SRAM) so drop those lines. Signed-off-by: Simon Glass <sjg@chromium.org> Tested on Beagleboard, Beagleboard xM Tested-by: Matt Porter <mporter@konsulko.com> Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'xnext/zynqmp' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-03-02-0/+14
|\ \ \ \
| * | | | arm64: Add Xilinx ZynqMP supportMichal Simek2015-03-02-0/+14
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-03-01-28/+28
|\ \ \ \
| * | | | ARM: UniPhier: switch to 1CS support cardMasahiro Yamada2015-03-01-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3CS support card (CONFIG_DCC_MICRO_SUPPORT_CARD) used to be used very often before, but it is recently getting a minority. Swith to the 1CS support card (CONFIG_PFC_MICRO_SUPPORT_CARD). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: switch to xHCI for PH1-Pro4Masahiro Yamada2015-03-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PH1-Pro4 includes both EHCI and xHCI IP cores. Unfortunately, U-Boot cannot enable EHCI and xHCI support simultaneously. Some users may wish Super-Speed connection. Disable CONFIG_USB_EHCI_HCD and enable CONFIG_USB_XHCI_HCD. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: update defconfigs using savedefconfigMasahiro Yamada2015-03-01-27/+27
| |/ / / | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-03-01-0/+21
|\ \ \ \ | |/ / / |/| | |
| * | | arm: rmobile: silk: Add support SDHIVladimir Barinov2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds GPIO configuration and initialization function of SDHI on Silk board Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: Add Porter board supportVladimir Barinov2015-02-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Porter is an entry level development board based on R-Car M2 SoC (R8A7791) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, SD, USB Host Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: lager: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lager board has two SDHI port as SDHI0 and SDHI2. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: gose: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gose board has three SDHI port. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: koelsch: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Koelsch board has three SDHI port. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: alt: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alt board has two SDHI port. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.1 at 2024-11-09 06:58:30 +0000