summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
...
* | odroid-xu3: defconfig: disable memset at malloc initPrzemyslaw Marczak2015-03-09-0/+2
| | | | | | | | | | | | | | Reduce the boot time of Odroid XU3 by disabling the memset at malloc init. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
* | odroid: defconfig: disable memset at malloc initPrzemyslaw Marczak2015-03-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the boot time of Odroid X2/U3 by disabling the memset at malloc init. This was tested on Odroid X2. A quick test with checking gpio pin state using the oscilloscope. Boot time from start to bootcmd (change gpio state by memory write command): - ~228ms - before this change (arch memset enabled for .bss clear) - ~100ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | trats2: defconfig: disable memset at malloc initPrzemyslaw Marczak2015-03-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the boot time of Trats2 by disabling the memset at malloc init. This was tested on Trats2. A quick test with trace. Boot time from start to main_loop() entry: - ~464ms - before this change (arch memset enabled for .bss clear) - ~341ms - after this change Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-03-05-0/+13
|\ \
| * | arm: socfpga: Enable DM and DM_SPIMarek Vasut2015-03-05-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable DM and DM_SPI support for both Cyclone 5 and Arria 5 boards, since they use drivers which require those. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Vince Bridgers <vbridger@opensource.altera.com>
| * | dt: socfpga: Import and enable Arria V DK DTSMarek Vasut2015-03-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import DTS for Arria V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
| * | dt: socfpga: Import and enable Cyclone V DK DTSMarek Vasut2015-03-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import DTS for Cyclone V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
| * | arm: socfpga: Add Altera Arria V DK supportMarek Vasut2015-03-04-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Altera Arria V development kit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
* | | m68k: add amcore board supportangelo@sysam.it2015-03-05-0/+2
| | | | | | | | | | | | | | | | | | Add Sysam Amcore m68k-based board support. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* | | Adding Support for BAV335x boardsGilles Gameiro2015-03-05-0/+10
| | |
* | | omap3: add support for QUIPOS Cairo board.Albert ARIBAUD \(3ADEV\)2015-03-05-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch extends OMAP3 support for AM/DM37xx and introduces the AM3703-based Quipos Cairo board. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-03-05-0/+3
|\ \ \
| * \ \ Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-03-02-30/+322
| |\ \ \
| * | | | warp: Add initial WaRP Board supportOtavio Salvador2015-02-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | | | | ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACKSimon Glass2015-03-04-0/+14
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in some cases SDRAM init requires global_data to be available and soon this will not be available prior to board_init_f(). Adjust the code paths in these cases to be correct. In some cases we had the SPL stack be in DDR as we might have large stacks (due to Falcon Mode + Environment). In these cases switch to CONFIG_SPL_STACK_R. In other cases we had simply been setting CONFIG_SPL_STACK into SRAM. In these cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also in SRAM) so drop those lines. Signed-off-by: Simon Glass <sjg@chromium.org> Tested on Beagleboard, Beagleboard xM Tested-by: Matt Porter <mporter@konsulko.com> Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'xnext/zynqmp' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-03-02-0/+14
|\ \ \ \
| * | | | arm64: Add Xilinx ZynqMP supportMichal Simek2015-03-02-0/+14
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-03-01-28/+28
|\ \ \ \
| * | | | ARM: UniPhier: switch to 1CS support cardMasahiro Yamada2015-03-01-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3CS support card (CONFIG_DCC_MICRO_SUPPORT_CARD) used to be used very often before, but it is recently getting a minority. Swith to the 1CS support card (CONFIG_PFC_MICRO_SUPPORT_CARD). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: switch to xHCI for PH1-Pro4Masahiro Yamada2015-03-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PH1-Pro4 includes both EHCI and xHCI IP cores. Unfortunately, U-Boot cannot enable EHCI and xHCI support simultaneously. Some users may wish Super-Speed connection. Disable CONFIG_USB_EHCI_HCD and enable CONFIG_USB_XHCI_HCD. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | ARM: UniPhier: update defconfigs using savedefconfigMasahiro Yamada2015-03-01-27/+27
| |/ / / | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-03-01-0/+21
|\ \ \ \ | |/ / / |/| | |
| * | | arm: rmobile: silk: Add support SDHIVladimir Barinov2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds GPIO configuration and initialization function of SDHI on Silk board Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: Add Porter board supportVladimir Barinov2015-02-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Porter is an entry level development board based on R-Car M2 SoC (R8A7791) This commit supports the following peripherals: - SCIF, I2C, Ethernet, QSPI, SD, USB Host Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: lager: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lager board has two SDHI port as SDHI0 and SDHI2. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: gose: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gose board has three SDHI port. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: koelsch: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Koelsch board has three SDHI port. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: alt: Add support SDHINobuhiro Iwamatsu2015-02-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alt board has two SDHI port. This adds GPIO configuration and initialization function of SDHI, and enables MMC command. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: silk: Migrate serial driver to drivers modelNobuhiro Iwamatsu2015-02-25-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds drivers model support of serial port to Silk board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: alt: Migrate serial driver to drivers modelNobuhiro Iwamatsu2015-02-25-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds drivers model support of serial port to Alt board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: lager: Migrate serial driver to drivers modelNobuhiro Iwamatsu2015-02-25-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds drivers model support of serial port to Lager board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: gose: Migrate serial driver to drivers modelNobuhiro Iwamatsu2015-02-25-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds drivers model support of serial port to Gose board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: rmobile: koelsch: Migrate serial driver to drivers modelNobuhiro Iwamatsu2015-02-25-0/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | This adds drivers model support of serial port to Koelsch board, and migrate serial port to drivers model. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | ARM: davinci: remove hawkboard supportMasahiro Yamada2015-02-24-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Sughosh Ganu <urwithsughosh@gmail.com> Cc: Syed Mohammed Khasim <sm.khasim@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* | | ARM: remove tnetv107x board supportMasahiro Yamada2015-02-24-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Chan-Taek Park <c-park@ti.com> Acked-by: Marek Vasut <marex@denx.de>
* | | ARM: remove a320evb board supportMasahiro Yamada2015-02-24-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Marek Vasut <marex@denx.de>
* | | ARM: remove cm4008 and cm41xx board supportMasahiro Yamada2015-02-24-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | These are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Greg Ungerer <greg.ungerer@opengear.com> Acked-by: Marek Vasut <marex@denx.de>
* | | ARM: remove dkb board supportMasahiro Yamada2015-02-24-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Lei Wen <leiwen@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
* | | ARM: remove jadecpu board supportMasahiro Yamada2015-02-24-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Weisser <weisserm@arcor.de> Acked-by: Marek Vasut <marex@denx.de>
* | | kconfig: switch to single .config configurationMasahiro Yamada2015-02-24-3/+3
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When Kconfig for U-boot was examined, one of the biggest issues was how to support multiple images (Normal, SPL, TPL). There were actually two options, "single .config" and "multiple .config". After some discussions and thought experiments, I chose the latter, i.e. to create ".config", "spl/.config", "tpl/.config" for Normal, SPL, TPL, respectively. It is true that the "multiple .config" strategy provided us the maximum flexibility and helped to avoid duplicating CONFIGs among Normal, SPL, TPL, but I have noticed some fatal problems: [1] It is impossible to share CONFIG options across the images. If you change the configuration of Main image, you often have to adjust some SPL configurations correspondingly. Currently, we cannot handle the dependencies between them. It means one of the biggest advantages of Kconfig is lost. [2] It is too painful to change both ".config" and "spl/.config". Sunxi guys started to work around this problem by creating a new configuration target. Commit cbdd9a9737cc (sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms.) added "make *_felconfig" to enable CONFIG_SPL_FEL on both images. Changing the configuration of multiple images in one command is a generic demand. The current implementation cannot propose any good solution about this. [3] Kconfig files are getting ugly and difficult to understand. Commit b724bd7d6349 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files. [4] The build system got more complicated than it should be. To adjust Linux-originated Kconfig to U-Boot, the helper script "scripts/multiconfig.sh" was introduced. Writing a complicated text processor is a shell script sometimes caused problems. Now I believe the "single .config" will serve us better. With it, all the problems above would go away. Instead, we will have to add some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM, but we will not have much. Anyway, this is what we do now in scripts/Makefile.spl. I admit my mistake with my apology and this commit switches to the single .config configuration. It is not so difficult to do that: - Remove unnecessary processings from scripts/multiconfig.sh This file will remain for a while to support the current defconfig format. It will be removed after more cleanups are done. - Adjust some makefiles and Kconfigs - Add some entries to include/config_uncmd_spl.h and the new file scripts/Makefile.uncmd_spl. Some CONFIG options that are not supported on SPL must be disabled because one .config is shared between SPL and U-Boot proper going forward. I know this is not a beautiful solution and I think we can do better, but let's see how much we will have to describe them. - update doc/README.kconfig More cleaning up patches will follow this. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-sunxiTom Rini2015-02-21-0/+26
|\ \
| * | sunxi: musb: Check Vbus-det before enabling otg port powerHans de Goede2015-02-21-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sending out 5V when there is a charger connected to the otg port is not a good idea, so check for this and error out. Note this commit currently breaks otg support on the q8h tablets, as we need to do some magic with the pmic there to get vbus info, this is deliberate (better safe then sorry), fixing this is on my TODO list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: Add support for the UTOO P66 tabletHans de Goede2015-02-21-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | rpi: add support for Raspberry Pi 2 model BStephen Warren2015-02-21-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | | ARM: at91: move board select menu and common settingsMasahiro Yamada2015-02-21-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board select menu in arch/arm/Kconfig is still big. To slim down it, this commit moves AT91 boards to arch/arm/mach-at91/Kconfig. Also, consolidate "config SYS_SOC" in each board Kconfig. The Kconfig files under board/ directory were modified with the following command: find board -name Kconfig | xargs sed -i -e ' /config SYS_SOC/ { N /default "at91"/ { N d } } ' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
* | | serial: Support an early UART for debuggingSimon Glass2015-02-19-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This came up in a discussion on the mailing list here: https://patchwork.ozlabs.org/patch/384613/ My concerns at the time were: - it doesn't need to be written in assembler - it doesn't need to be ARM-specific This patch provides a possible alternative. It works by allowing any serial driver to export one init function and provide a putc() function. These can be used to output debug data before the real serial driver is available. This implementation does not depend on driver model, and it is possible for it to operate without a stack on some architectures (e.g. PowerPC, ARM). It provides the same features as the ARM-specific debug.S but with more UART and architecture support. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | dm: mx6: Adjust mx6sxsabresd to use Kconfig for DM_THERMALSimon Glass2015-02-19-0/+4
| | | | | | | | | | | | | | | | | | Use Kconfig instead of board config for DM and DM_THERMAL. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | dm: Move CONFIG_I2C_COMPAT to KconfigSimon Glass2015-02-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make this option available in Kconfig and clean up the board that uses it. Note there is also an entry in exynos5-common.h but this affects multiple boards and should be dropped as part of the Samsung I2C migration to driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | dm: cros_ec: Convert to KconfigSimon Glass2015-02-19-0/+18
|/ / | | | | | | | | | | | | | | | | Since both I2C and SPI are converted to Kconfig, we can convert cros_ec to Kconfig for these buses. LPC will need to wait until driver mode PCI is available. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-02-17-0/+15
|\ \
generated by cgit v1.1 at 2024-11-09 11:26:02 +0000