summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* igep0146: Fix spl defconfigJose Miguel Sanchez Sanabria2018-07-23-1/+1
| | | | Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* Disabled config auto local version:Jose Miguel Sanchez Sanabria2018-07-16-0/+6
| | | | | | igep0046dl igep0046q igep0146 Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* IGEP0146: Fixed Unstable MMC BUG: SWUBIMX17-33Jose Miguel Sanchez Sanabria2018-06-28-5/+5
| | | | | | | | Define separated MUX for PAD CLK of USDHC controllers Redefine pullups and DSE resistance of other PADs of USDHC controllers Key point was to reduce the DSE resistance from 80 ohms to 48 ohms and to put CLK line at 100K pulldown Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* IGEP0146: Add Support for PeripherialsJose Miguel Sanchez Sanabria2018-06-19-2/+38
| | | | | | | | | | | SD I2C eMMC Tuned DRAM E²PROM Ethernet Fix using Hysteresis in MUX along with other pad control options Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* IGEP0146: Use 512M RamJose Miguel Sanchez Sanabria2018-06-12-1/+1
| | | | Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* IGEP0146: Initial commitJose Miguel Sanchez Sanabria2018-06-12-0/+16
| | | | | | | | | Structure folders defconfig initial ram config only UART will be configured for basic printf Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* igep0046: DL,2GJose Miguel Sanchez Sanabria2018-05-24-1/+38
| | | | | | | SPL support: Falcon by default Falcon support: Ramdisk configurable in defconfig Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* Add initial support iMX6Q for igep0046 defconfigJose Miguel Sanchez Sanabria2018-02-15-1/+16
| | | | | | | | | | | Add RAM support iMX6Q Updated default .dtb file defconfig eeprom clean up I2C SCL low bus lock fix Add Audio Reset Changed I2C MUX - no pullups Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* Added default MAC supportJose Miguel Sanchez Sanabria2018-02-05-7/+6
| | | | | | Added multiple USB support Added Marvell PHY Led fix Added auto-loading Environment
* Remove old configuration fileManel Caro2018-01-26-12/+0
| | | | Signed-off-by: Manel Caro <mcaro@iseebcn.com>
* Rename config file according to other igep boardsManel Caro2018-01-26-0/+16
| | | | Signed-off-by: Manel Caro <mcaro@iseebcn.com>
* Environment supportJose Miguel Sanchez Sanabria2018-01-23-1/+1
|
* Added support for:Jose Miguel Sanchez Sanabria2018-01-23-1/+4
| | | | | | | | | * MMC * Ethernet * Eeprom * USB OTG * USB Host * DRAM Samsung 4 Gb
* Added support to igep0046Jose Miguel Sanchez Sanabria2018-01-12-0/+9
|
* MA-9409-3 Add base board support for android and android things.zhang sanshan2017-07-10-33/+160
| | | | | | | | | | | | | | | | | | * add board support for android and android things. mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul reorganize the Kconfig, and fix the redefine issue. * add android configure into configure-while * add a common file mx_android_common.h it will be included by android and android things. defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT * move partition_table_valid into f_fastboot.c. it's a common code. * add invalidate_dcache_range in fixed order. It will have salt invalid issue if we do not add it in order * add display for pico-7d. Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>
* MLK-15087 mx7ulp_evk: Add m4 boot defconfigYe Li2017-06-20-0/+44
| | | | | | | | | Add back the defconfig to boot M4 in single mode, because some customers are using the defconfig during development. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 8d4daa7703af842a56e9ea7aefe7f3d3a36580b8)
* MXSCM-292-2 mx6sxscm: convert to enable OF_CONTROL and DM driversJuan Gutierrez2017-04-28-0/+227
| | | | | | | | | | | | | Update mx6sxscm boards code and build configurations to enable OF_CONTROL and DM drivers. 1. Update GPIO codes for adding gpio request 2. Update PMIC and LDO by-pass codes for DM PMIC 3. Add lpddr2 512MB size and eMMC options tolocal Kconfig 4. Update license with NXP 2017 5. Add defconfigs for EVB boards Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
* MXSCM-290-2 mx6dqscm: convert to enable OF_CONTROL and DM driversJuan Gutierrez2017-04-28-0/+470
| | | | | | | | | | | | | | | Update mx6dqscm boards code and build configurations to enable OF_CONTROL and DM drivers. 1. Update GPIO codes for adding gpio request 2. Enable USB DM driver 3. Update PMIC and LDO by-pass codes for DM PMIC 4. Add spinor boot support 5. Add lpddr2 modes, sizes and boards on local Kconfig 6. Update license with NXP 2017 7. Add defconfigs for qwks boards Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
* MLK-12527-4 android: Fix duplicated configurationYe Li2017-04-06-1/+0
| | | | | | | The CONFIG_USB_GADGET is duplicated set in defconfig and android header file. Remove it from defconfig Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14628 epdc: Fix configs issueYe Li2017-04-06-1/+6
| | | | | | | | | In Kconfig, the CONFIG_MXC_EPDC depends on CONFIG_LCD. We can't only set the CONFIG_MXC_EPDC in defconfig and set CONFIG_LCD in header file. This will cause the both two configs are not selected. So in fact the epdc codes are not compiled. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13499 imx6sll: add epdc splash screen supportRobby Cai2017-04-06-0/+46
| | | | | | | | | add splash screen feature for epdc. it's tested on imx6sll arm2 board and evk board. Signed-off-by: Robby Cai <robby.cai@nxp.com> (cherry picked from commit c85c6f2a0f08dfc6c2859fe969b2021ab32b9370) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14622 mx6sx: update defconfig to enable setexpr commandYe Li2017-04-05-24/+0
| | | | | | | Since we need the setexpr command for m4 image loading, so enable the CONFIG_CMD_SETEXPR for i.MX6SX defconfigs with m4 boot enabled. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14607 mx7d: Enable the CONFIG_CMD_BOOTD for auto bootYe Li2017-04-05-23/+0
| | | | | | | The CONFIG_CMD_BOOTD is commented in the defconfig files, then the default boot can't work. We need to uncomment it for auto boot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13130: configs: mx6qarm2: android lpddr2 pop supportAdrian Alonso2017-04-05-0/+45
| | | | | | | Add Android support for mx6qarm2 lpddr2 pop target Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 6356f2b420f3571493755f6b3a307a66a539b60c)
* MA-9263-3 [Android] Partition: enable GPT partition on imx devicesSanshan Zhang2017-04-05-0/+19
| | | | | | | | | | | | | 1. pass androidboot.storage_type to android, 'init' use it to parse different init.freescale.storage.rc. 2. store new ptable with gpt partition. 3. we use the last LBA as backup gpt table, there is many warning log when boot, change print to debug Change-Id: I84070735e9d4c2741b0e240bc1c61b357dabc5b8 Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com> (cherry picked from commit da0ce2787256a323371641b0764266d386d767a5) Signed-off-by: Ye Li <ye.li@nxp.com>
* MA-9213 imx: mx7ulp-evk: Add android supportSanshan Zhang2017-04-05-0/+44
| | | | | | | | | | | Add android features on i.MX7ULP EVK board. Implement the code to get boot device and the serial number on mx7ulp. TODO: will add the code which check misc partition after porting BCB. Change-Id: I9d06fecba303fa4dfdcaf73da1b6246444697bba Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com> (cherry picked from commit 4c60cba3a017b921aebb84dd1268c898e549c99a) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12527-3 android: Add board support to enable android fastbootYe Li2017-04-05-0/+945
| | | | | | | | | | | | Add board level support for android fastboot feature. Each board has a android specified header file for defining android related configuraitons. And add build targets for their android uboot images building. For mx6qsabreauto, mx6sabresd and mx7dsabresd, we enable the android fastboot exclusive with DFU. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 43fe988af28c5e51fb23aa846e04bc9698256926)
* MLK-14484-3 mx7ulp_arm2: Convert to use OF_CONTROLYe Li2017-04-05-6/+42
| | | | | | | | | | Add the 10x10 ARM2 and 14x14 ARM2 DTS files. Also convert the board codes to use OF_CONTROL and DM drivers. Since the DTS files only have UART and SD1 supported. So we only enable the DM for these two modules. QSPI and USB are still kept in non-DM fashion. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-2 mx7ulp_arm2: Add 10x10 and 14x14 ARM2 codesYe Li2017-04-05-0/+20
| | | | | | | | | | | | | Copy the mx7ulp ARM2 codes from v2016.03 as the base for using OF_CONTROL and DM drivers. The 14x14 ARM2 LPDDR3 script is v1.5: - IMX7ULP1_LPDDR3_320MHz_512MB_32bit_V1.5.inc The 10x10 ARM2 LPDDR2 script is v1.1: - IMX7ULP1_LPDDR2_320MHz_1GB_32bit_V1.1.inc Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-9 mx7ulp_evk: Add eMMC reworked board supportYe Li2017-04-05-0/+41
| | | | | | | | | Add build configuration and DTS file to enable eMMC for eMMC reworked EVK board. Because the eMMC DTS file has QSPI node disabled, so we change to use non-DM QSPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-8 mx7ulp_evk: Add dynamical MMC device detectionYe Li2017-04-05-0/+4
| | | | | | | Add board_late_mmc_env_init to support MMC device detection for environment variables. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13547 configs: mx7ulp_evk: enable ethernet boot supportPeter Chen2017-04-05-0/+4
| | | | | | | | | | Since we can use USB ethernet instead of local ethernet, add ethernet support for it. To use USB ethernet function at u-boot, just plug in Micro-AB cable at USBOTG1 port with USB2Ethernet adapter connected. Signed-off-by: Peter Chen <peter.chen@nxp.com> (cherry picked from commit 60ffddf87cf6b8502c5d5fc6540364adfd66ebb3) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13929-6 mx7ulp_evk: Enable the MIPI DSI splashscreenYe Li2017-04-05-0/+1
| | | | | | | | Enable and setup board level codes for MIPI DSI splashscreen on EVK board. User needs set env variable"panel=HX8363_WVGA" for displaying. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce)
* MLK-14445-6 mx7ulp_evk: Add USB OTG0 supportYe Li2017-04-05-0/+12
| | | | | | | Porting codes to support USB OTG0 on the EVK board. Convert to use DM USB driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-4 mx7ulp: Fix wrong i2c configuration nameYe Li2017-04-05-2/+2
| | | | | | | Wrong I2c driver configuration name is used in codes, so I2c driver is not built. Correct it. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-3 mx7ulp_evk: Enable wdog driver for reset cpuYe Li2017-04-05-0/+2
| | | | | | | Enable the CONFIG_ULP_WATCHDOG in defconfig, so that reset command can work. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-2 mx7ulp_evk: Add QSPI flash supportYe Li2017-04-05-2/+14
| | | | | | | | | Porting the QSPI flash board support from v2016.03, and convert to use DM QSPI driver. Since we need to support QSPI at default in u-boot, change the default DTS file to qspi enabled DTS. Signed-off-by: Ye Li <ye.li@nxp.com>
* imx: mx7ulp_evk: enable mmc/regulator supportPeng Fan2017-04-05-0/+16
| | | | | | | | | | | Enable MMC support. The fsl sdhc driver needs regulator to enable power, so enable regulator support. And bootcmd and more env. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: imx7ulp: add EVK board supportPeng Fan2017-04-05-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* MLK-14419-3 imx: mx7d_arm2: add 19x19 LPDDR2/LPDDR3/DDR3 ARM2 supportPeng Fan2017-04-05-0/+513
| | | | | | | | | Add 19x19 LPDDR2/LPDDR3/DDR3 ARM2 board supports. Enable the OF_CONTROL and convert them to use DM driver. Since the DTB lacks the support for some modules. We have to use QSPI and FEC with non-DM driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14419-2 imx: mx7d_arm2: add 12x12 ddr3 arm2 board supportPeng Fan2017-04-05-0/+124
| | | | | | | | Add 12x12 ddr3 arm2 board support and convert it to use OF_CONTROL and DM drivers. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14419-1 imx: mx7d_arm2: add 12x12 lpddr3 arm2 supportPeng Fan2017-04-05-0/+337
| | | | | | | | Add mx7d 12x12 lpddr3 arm2 support, which has enabled the OF_CONTROL and DM drivers Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-11 imx: mx7dsabresd: add reva/revb config filePeng Fan2017-04-05-0/+144
| | | | | | Add reva/revb config file. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14418-10 imx: mx7dsabresd: update ddr script and add plugin supportPeng Fan2017-04-05-0/+73
| | | | | | Update ddr script and add plugin support. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14418-9 imx: mx7dsabresd: add nand/qspi boot supportPeng Fan2017-04-05-0/+149
| | | | | | | | | | Add nand/qspi build configurations for their boot support. Also Add gpmi-nand and qspi specified DTS files for enable them. For QSPI, this patch changes it to use DM driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-8 imx: mx7dsabresd: add epdc supportPeng Fan2017-04-05-0/+72
| | | | | | | | Add epdc support from v2016.03. Add a epdc specified DTS file for using epdc Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-7 imx: mx7dsabresd: add FEC DM supportPeng Fan2017-04-05-0/+1
| | | | | | | | Add FEC2 and convert to use FEC DM driver. Add board rev check. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14418-6 imx: mx7dsabresd: switch to DM USBPeng Fan2017-04-05-0/+3
| | | | | | Switch to use DM USB. Enable GPIO regulator to handle vbus supply. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14418-4 imx: mx7dsabresd: enable dm driversPeng Fan2017-04-05-0/+17
| | | | | | | Enable GPIO/I2C/MMC/SPI/74X164 DM drivers. Discard mxc spi support. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14418-3 imx: mx7: Enable dtb support for mx7dsabresdPeng Fan2017-04-05-1/+2
| | | | | | Enable dtb support for mx7dsabresd board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.1 at 2024-06-28 14:44:35 +0000