summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
* sunxi: Add defconfig and dts file for inet86dz boardHans de Goede2016-06-20-0/+24
| | | | | | | | | | | | | | | The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file this commit adds is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tabletHans de Goede2016-06-20-0/+24
| | | | | | | | | | | | The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* autoboot: add CONFIG_AUTOBOOT to allow to not compile autoboot.cMasahiro Yamada2016-06-20-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards. Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to not compile common/autoboot.c, as described in common/Makefile: # This option is not just y/n - it can have a numeric value ifdef CONFIG_BOOTDELAY obj-y += autoboot.o endif It was a bit odd to enable/disable code with an integer type option, but it was how this option worked before that commit, and several boards actually unset it to opt out of the autoboot feature. This commit adds a new bool option, CONFIG_AUTOBOOT, and makes CONFIG_BOOTDELAY depend on it. I chose "default y" for this option because most boards use the autoboot. I added "# CONFIG_AUTOBOOT is not set" for the boards that had not set CONFIG_BOOTDELAY prior to the bad commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-06-20-4/+6
|\
| * reset: implement a reset testStephen Warren2016-06-19-4/+6
| | | | | | | | | | | | | | | | | | This adds a sandbox reset implementation (provider), a test client device, instantiates them both from Sandbox's DT, and adds a DM test that excercises everything. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | ARM: uniphier: use the default CONFIG_BOOTDELAY=2Masahiro Yamada2016-06-20-6/+0
|/ | | | | | | I do not insist on CONFIG_BOOTDELAY=3. The default value in Kconfig, CONFIG_BOOTDELAY=2, is just fine for these boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-06-18-0/+43
|\
| * ARM: socfpga: add support for IS1 boardPavel Machek2016-06-08-0/+43
| | | | | | | | | | | | | | | | This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-06-18-0/+4
|\ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
| * | arm: bcm281xx: choose 8-bit phy bus widthSteve Rae2016-06-13-0/+4
| | | | | | | | | | | | | | | | | | | | | The Kona PHY supports an 8-bit wide UTMI interface, therefore, choose this Kconfig setting. Signed-off-by: Steve Rae <srae@broadcom.com>
* | | arm, am335x: siemens: enable DM/DTS supportHeiko Schocher2016-06-17-0/+49
| | | | | | | | | | | | | | | | | | enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | arm, am335x: siemens: update etamin defconfigHeiko Schocher2016-06-17-0/+6
| | | | | | | | | | | | | | | | | | | | | add missing USB_MUSB_* and CONFIG_G_DNL_* board configuration. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | ARM: AM57xx: Enable FIT for HS DevicesAndreas Dannenberg2016-06-17-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Enable FIT support for AM57xx platforms using the high-security (HS) device variant. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | ARM: AM437x: Enable FIT for hs platformsSrinivas, Madan2016-06-17-0/+4
| | | | | | | | | | | | | | | | | | | | | Adds FIT support to the SPL and u-boot for AM437x HS devices. Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | ARM: AM437x: Sync defconfig between GP and HS EVMSrinivas, Madan2016-06-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adds missing NAND option to CONFIG_SYS_EXTRA_OPTIONS for AM437x HS EVMs. This syncs up the config options between GP and HS EVMs. Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | configs: Re-sync BOOTDELAY changesTom Rini2016-06-17-63/+317
| | | | | | | | | | | | | | | | | | | | | | | | With updated moveconfig.py and an better default, re-generate the migration of BOOTDELAY to the defconfig. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | ARM: dts: AM572x-IDK Initial SupportSchuyler Patton2016-06-13-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | ARM: AM57xx: Enable FITLokesh Vutla2016-06-13-0/+4
| | | | | | | | | | | | | | | | | | | | | Enable FIT support for AM57xx platforms Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVMLokesh Vutla2016-06-13-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | board/am57xx supports all boards based on am57xx. Rename the taget as TARGET_AM57XX_EVM. Fixes: 74cc8b097d9af ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms") Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | armv8: s32v234: Introduce basic support for s32v234evbEddy Petrișor2016-06-13-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for NXP's S32V234 SoC and S32V234EVB board. The S32V230 family is designed to support computation-intensive applications for image processing. The S32V234, as part of the S32V230 family, is a high-performance automotive processor designed to support safe computation-intensive applications in the area of vision and sensor fusion. Code originally writen by: Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com> Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com> Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com> Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>
* | | board: arm:: Add support for Broadcom BCM23550Steve Rae2016-06-13-0/+24
| | | | | | | | | | | | | | | | | | Add support for the Broadcom BCM23550 board. Signed-off-by: Steve Rae <srae@broadcom.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-arcTom Rini2016-06-13-1/+1
|\ \ \
| * | | axs103: Bump CPU frequency from 50MHz to 100MHzAlexey Brodkin2016-06-13-1/+1
| |/ / | | | | | | | | | | | | | | | | | | In the upcoming release of axs103 v1.1 CPU will run @100MHz which we support with that change. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-06-13-0/+20
|\ \ \
| * | | arm: at91: Add support for gurnardAndre Renaud2016-06-12-0/+20
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and 128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and two UARTs. Signed-off-by: Andre Renaud <andre@designa-electronics.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [apply CONFIG_BOOTDELAY transition] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-06-12-0/+3
|\ \ \
| * | | sunxi: Add INITIAL_USB_SCAN_DELAY to Mele_A1000G_quad_defconfigHans de Goede2016-06-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mele_A1000G_quad has an onboard usb <-> sata conversion which needs longer then the usb-spec allows to connect after getting power. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi: Enable ALDO3 and ALDO4 in Wobo_i5_defconfigHans de Goede2016-06-10-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | These are used for the usb wifi and if we leave the enabling up to the kernel, we get hit by the axp209 issues with enabling ldo3 or 4 post boot and the systems hangs as soon as it is enabled. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-06-12-18/+18
|\ \ \
| * | | board: ge: bx50v3: disable unused features to improve size and boot speedAndrew Shadura2016-06-07-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable unused FPGA, NFS, FAT and EFI support to reduce the bootloader size. Don't clear memory reserved for malloc to improve boot speed. Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
| * | | board: ge: bx50v3: make network support optional and disabled by defaultAndrew Shadura2016-06-07-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The network support is only useful for development and shouldn't be enabled in production, so it has to be disabled in U-boot by default. Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
| * | | board: ge: bx50v3: make USB support optional and disabled by defaultAndrew Shadura2016-06-07-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB support is only useful for development and shouldn't be enabled in production, so it has to be disabled in U-boot by default. Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-06-12-0/+4
|\ \ \ \
| * | | | x86: Enable regmap and syscon for coreboot and qemu-x86Bin Meng2016-06-12-0/+4
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | These are generic and should be turned on on coreboot and qemu-x86. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | armv8: ls2080aqds: Enable QSPI boot supportYuan Yao2016-06-10-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds QSPI boot support for LS2080AQDS board. The QSPI boot image need to be programmed into the QSPI flash first. Then we can switch to booting from QSPI memory space. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | | configs: ls2080aqds_nand_defconfig: Enable QSPIYuan Yao2016-06-10-0/+9
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | The Freescale QSPI driver has been converted to Driver Model. This patch enables FSL_QSPI and its dependence options, DM, DM_SPI, OF_CONTROL and so on. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | siemens,am33x: add draco etamin boardHeiko Schocher2016-06-09-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the draco CPU board family, etamin is a new variant with bigger flash and more RAM. Due to new flash that uses larger pages (4K) some changes are necessary because it impacts the MTD partition layout and the ubi mount parameters. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Move BOOTDELAY into defconfig, just always be 3 now] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | am335x, shc: add support for the am335x based bosch shc boardHeiko Schocher2016-06-09-0/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot SPL 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:40:06) SHC C3-Sample MPU reference clock runs at 6 MHz Setting MPU clock to 594 MHz Enabling Spread Spectrum of 18 permille for MPU Trying to boot from MMC reading u-boot.img reading u-boot.img U-Boot 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:05:35 +0100) Watchdog enabled I2C: ready DRAM: 512 MiB reloc off 1f783000 MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Net: cpsw U-Boot# Signed-off-by: Heiko Schocher <hs@denx.de>
* | | common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig optionHeiko Schocher2016-06-09-239/+779
| |/ |/| | | | | | | | | | | | | | | | | | | move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | Merge http://git.denx.de/u-boot-samsungTom Rini2016-06-06-0/+39
|\ \ | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
| * | exynos: video: Convert several boards to driver model for videoSimon Glass2016-05-25-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update several boards to use driver model for video. This involves changes to the EDP and FIMD (frame buffer) drivers. Existing PWM, simple-panel and pwm-backlight drivers are used. These work without additional configuration since they use the device tree settings in the same way as Linux. Boards converted are: - snow - spring - peach-pit - peach-pi All have been tested. Not converted: - MIPI display driver - s5pc210_universal - smdk5420 - smdk5250 - trats - trats2 Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | board: samsung: add initial Espresso7420 board supportThomas Abraham2016-05-25-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Espresso7420 is a development/evaluation board for Exynos7420 SoC. It includes multiple onboard compoments (EMMC/Codec) and various interconnects (USB/HDMI). Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm: exynos: realign the code to allow support for newer 64-bit platformsThomas Abraham2016-05-25-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing Exynos 32-bit platform support needs to be realigned in order to support newer 64-bit Exynos platforms. The driver model will be utlized for drivers on the 64-bit Exynos platforms and so some of the older platform support code would not be required for the newer 64-bit Exynos platforms. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | arm/arm64: implement a boot header capabilityAndre Przywara2016-06-06-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPL loaders (like Allwinner's boot0, and Broadcom's boot0) require a header before the actual U-Boot binary to both check its validity and to find other data to load. Sometimes this header may only be a few bytes of information, and sometimes this might simply be space that needs to be reserved for a post-processing tool. Introduce a config option to allow assembler preprocessor commands to be inserted into the code at the appropriate location; typical assembler preprocessor commands might be: .space 1000 .word 0x12345678 Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Steve Rae <srae@broadcom.com> Commit Notes: Please note that the current code: start.S (arm64) and vectors.S (arm) already jumps over some portion of data already, so this option basically just increases the size of this region (and the resulting binary). For use with Allwinner's boot0 blob there is a tool called boot0img[1], which fills the header to allow booting A64 based boards. For the Pine64 we need a 1536 byte header (including the branch instruction) at the moment, so we add this to the defconfig. [1] https://github.com/apritzel/pine64/tree/master/tools END Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: DRA7xx: Enable FIT for hs platformsLokesh Vutla2016-06-06-57/+5
| | | | | | | | | | | | | | | | | | | | | Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | strider: Support cpu-dp flavorDirk Eibach2016-06-06-0/+20
| | | | | | | | | | | | | | | | | | | | | There is new strider cpu flavor with DisplayPort video. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | strider: Support con-dp flavorDirk Eibach2016-06-06-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | There is a new strider console flavor with DisplayPort video. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-06-06-0/+167
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modified: configs/ls1012afrdm_qspi_defconfig configs/ls1012aqds_qspi_defconfig configs/ls1012ardb_qspi_defconfig include/configs/ls1012afrdm.h include/configs/ls1012aqds.h include/configs/ls1012ardb.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | usb: move CONFIG_USB_XHCI_DWC3 to KconfigMasahiro Yamada2016-06-04-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | usb: move CONFIG_USB_XHCI to Kconfig with renamingMasahiro Yamada2016-06-04-0/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>