summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeLines
...
* | arm64: mvebu: Add PCI support to DB-88F8040 boardStefan Roese2016-12-05-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds PCI support to the Marvell Armada-8K devel board. Additionally the Intel E1000 ethernet driver is enabled so that network support is available on this board, even without the internal network interfaces being supported (yet). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* | arm64: mvebu: Add support for the DB-88F8040 Armada 8k devel boardStefan Roese2016-12-05-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the necessary files to support the Marvell Armada 8k devel board. Most board specfic files are shared with the Armada 7k boards under the name "armada-8k*". So only minimal changes are necessary to add this basic board support (except the DT files of course). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* | arm64: mvebu: Rename db-88f7040 files to armada-8kStefan Roese2016-12-05-1/+3
|/ | | | | | | | | | | | | | | | | This moves some of the Armada DB-88F7040 board specific files to a more generic name: armada-8k. This is in preparation for the Armada-8k support which will be added soon. And since both platforms share most devices, lets also share most source files to not duplicate the code here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-12-04-55/+84
|\
| * powerpc: mpc85xx: Move SECURE_BOOT to KconfigYork Sun2016-12-02-45/+71
| | | | | | | | | | | | Move from CONFIG_SYS_EXTRA_OPTIONS to Kconfig option. Signed-off-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Move SECURE_BOOT to KconfigYork Sun2016-12-02-3/+5
| | | | | | | | | | | | Move from CONFIG_SYS_EXTRA_OPTIONS to Kconfig option. Signed-off-by: York Sun <york.sun@nxp.com>
| * armv7: ls1021a: Move SECURE_BOOT option to KconfigYork Sun2016-12-02-3/+4
| | | | | | | | | | | | Move from CONFIG_SYS_EXTRA_OPTIONS to Kconfig option. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: cyrus: Separate P5020/P5040 config optionsYork Sun2016-12-02-4/+4
| | | | | | | | | | | | | | Instead of using EXTRA options in defconfig, use two targets in Kconfig to select correct SoC. Signed-off-by: York Sun <york.sun@nxp.com>
* | defconfig: am43xx_evm: Enable DM_SPI and DM_SPI_FLASHVignesh R2016-12-04-0/+4
| | | | | | | | | | | | | | | | | | | | Commit 4c4e3b37750f3("ARM: AM43xx: Enable FIT") accidentally disabled DM_SPI and DM_SPI_FLASH. Add back DM_SPI and DM_SPI_FLASH to am43xx_evm_defconfig in order to make use of DM framework for QSPI. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* | arm: Remove VCMA9 boardSimon Glass2016-12-04-17/+0
| | | | | | | | | | | | | | | | | | This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | arm: Remove smdk2410 boardSimon Glass2016-12-04-18/+0
| | | | | | | | | | | | | | | | This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch>
* | ARM: dts: AM571x-IDK Initial SupportSchuyler Patton2016-12-04-1/+1
| | | | | | | | | | | | | | | | | | Add initial DTS support for AM571-IDK evm. Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Add support for detection of X15 revb1Lokesh Vutla2016-12-04-1/+1
| | | | | | | | | | | | | | | | | | | | BeagleBoard-X15 Rev B1 with SR1.1 platform have incompatible changes for HDMI GPIO requiring new dtb support. This implies we have to properly identify the platform now as well. Hence provide a different board name for the Rev B1 variants. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: dra7xx: Enable lp873x optionsKeerthy2016-12-04-0/+6
| | | | | | | | | | | | | | | | DRA71-evm uses LP873x regulator. Enable lp873x PMIC config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: dra7xx: Enable pmic/regulator optionsLokesh Vutla2016-12-04-0/+5
| | | | | | | | | | | | | | Enable pmic/regulator config options. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: dra7xx: hs: Enable DM_ETHLokesh Vutla2016-12-04-0/+1
| | | | | | | | | | | | | | Enable DM_ETH for hs boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: dts: dra71x-evm: Add DT supportLokesh Vutla2016-12-04-2/+2
| | | | | | | | | | | | | | Add DT support for dra71-evm and built it as part of FIT image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | omap4_sdp4430: Disable SPL_OS_BOOTTom Rini2016-12-04-1/+0
| | | | | | | | | | | | We are tight on space on this board so drop SPL_OS_BOOT Signed-off-by: Tom Rini <trini@konsulko.com>
* | cmd: move CMD_PXE to KconfigYann E. MORIN2016-12-03-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, CMD_PXE is forcibly enabled in config_distro_defaults.h, so that general purpose distributions can rely on it being defined. This header is included, under conditions or not, by various archs or famillies of archs / SoCs. However, it is very possible that boards based on those SoCs will not have a physical ethernet connector at all, even if the have a MAC; for example, the Nanopi Neo AIR (sunxi H3) does not. It is also possible that network booting is absolutely not necessary for a device. However, it is not possible to disable the PXE command, as it is forcibly enabled and is non-configurable. But it turns out we already have a config option to build a distro-ready image, in the name of DISTRO_DEFAULTS. Move CMD_PXE out of the hard-coded config_distro_defaults.h into a Kconfig option, that gets selected by DISTRO_DEFAULTS when it is set. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Joe Hershberger <joe.hershberger@ni.com> [trini: Make it select MENU, run moveconfig.py] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Enable DISTRO_DEFAULT on platforms that missed it beforeTom Rini2016-12-03-705/+66
| | | | | | | | | | | | | | | | | | A number of platforms had been using the distro default feature before it was moved to Kconfig but did not enable the new Kconfig option when it was enabled. This caused a regression in terms of features and this introduces breakage when more things move to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
* | cmd: Convert CMD_BOOTMENUTom Rini2016-12-03-0/+1
| | | | | | | | | | | | Also convert MENU while we're in here. Signed-off-by: Tom Rini <trini@konsulko.com>
* | davinci: omapl138_lcdk: add NAND SPL boot supportFabien Parent2016-12-03-0/+3
| | | | | | | | | | | | | | | | | | | | NAND SPL boot was missing. Add it. The README specific to omapl138-lcdk is also removed because its content does not apply anymore, i.e. the generated AIS image can be flashed directly to the NAND without using any external tool to create and bootable AIS image. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | davinci: omapl138_lcdk: add u-boot sector for mmc/sd bootFabien Parent2016-12-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | Set the correct CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR value in order to be able to boot from MMC/SD. The SPL is stored at sector 0x75, while u-boot will follow at sector 0xb5. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: am43x: hs: Modify SPL load address to fix UART boot issueMadan Srinivas2016-12-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An issue in the TI secure image generation tool causes the ROM to load the SPL at a different load address than what is specified by CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot. This causes the SPL to fail on secure devices during peripheral boot. The TI secure image generation tool has been fixed so that the SPL will always be loaded at 0x403018E0 by the ROM code for both peripheral and memory boot modes. am43x hs defconfig file have been updated to reflect this change. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | r2dplus: select rtl8139 driver in defconfigVladimir Zapolskiy2016-12-02-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_RTL8139 was moved to a board defconfig by a commit 86e9dc86b1a2 ("net: Move CONFIG_RTL8139 to Kconfig"), however it was done incorrectly due to a missing CONFIG_NETDEVICES selection, thus virtually it was just a removal of the driver compilation. As an unlucky consequence the option was completely removed by a purge commit adad96e60d0e ("configs: Re-sync HUSH options"), restore the driver inclusion back. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ARM: am57xx_evm: enable DFU supportSekhar Nori2016-12-02-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AM57xx GP EVM has USB2 port of the SoC exposed as USB client port. It is useful to be able to use this port for USB DFU downloads. Enable USB DFU support. Tested on AM57x GP EVM Rev A3 using DFU to download to connected SD card. configs for HS version of the AM57x EVM are included in the patch but not really tested. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | mvebu: db-88f6820-amc: Enable FIT supportChris Packham2016-12-01-0/+2
| | | | | | | | | | Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | ts4600: Disable CONFIG_DISPLAY_CPUINFOTom Rini2016-11-30-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Without this change we see: ../arch/arm/cpu/arm926ejs/mxs/mxs.c: In function ‘print_cpuinfo’: ../arch/arm/cpu/arm926ejs/mxs/mxs.c:181:23: warning: unused variable ‘data’ [-Wunused-variable] ../arch/arm/cpu/arm926ejs/mxs/mxs.c:180:6: warning: variable ‘cpurev’ set but not used [-Wunused-but-set-variable] So the easy solution is to disable CONFIG_DISPLAY_CPUINFO Reviewed-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-11-30-0/+87
|\ \ | |/ |/|
| * mx6sx: Add initial support for Samtec VIN|ING 2000 boardChristoph Fritz2016-11-30-0/+31
| | | | | | | | | | | | | | | | This patch adds initial support for Samtec VIN|ING 2000 board. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * imx7: SPI: add suport for SPI flash in mikroBUS slotAngus Ainslie2016-11-29-0/+3
| | | | | | | | | | | | | | | | | | | | Enable the escpi3 nets attached to the mikroBUS slot on the i.MX7 Sabre evalution board. Also enble the SPI flash commands to work with the "flash click" board. This is V2 of this patch with changes recommended by the maintainer CC: Jagan Teki <jteki@openedev.com>
| * mx6sx: Add initial support for UDOO Neo BoardBreno Lima2016-11-29-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi <francesco.monte@gmail.com>: https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * ARM: ts4600: add basic board supportSebastien Bourdelin2016-11-29-0/+18
| | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routinesEric Nelson2016-11-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DDR calibration routines are gated by conditionals for the i.MX6DQ SOCs, but with the use of the sysinfo parameter, these are usable on at least i.MX6SDL and i.MX6SL variants with DDR3. Also, since only the Novena board currently uses the dynamic DDR calibration routines, these routines waste space on other boards using SPL. Add a KConfig entry to allow boards to selectively include the DDR calibration routines. Signed-off-by: Eric Nelson <eric@nelint.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-11-29-27/+546
| |\ | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | mx35: add DT support to flea3 boardHeiko Schocher2016-11-16-0/+4
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-11-29-318/+284
|\ \ \
| * | | powerpc: T4240: Remove macro CONFIG_PPC_T4240York Sun2016-11-23-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T4240 from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4160: Remove macro CONFIG_PPC_T4160York Sun2016-11-23-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T4160 instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4160RDB: Separate from T4240RDB in KconfigYork Sun2016-11-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T4160RDB to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4160QDS: Separate from T4240QDS in KconfigYork Sun2016-11-23-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T4160QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081York Sun2016-11-23-17/+14
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T2080RDB: Rename from T208XRDB in KconfigYork Sun2016-11-23-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T208XQDS: Split as T2080QDS and T2081QDSYork Sun2016-11-23-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | Use two separated targets in Kconfig to simplify configurations. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDBYork Sun2016-11-23-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI. CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042RDB: Remove macro CONFIG_T1042RDBYork Sun2016-11-23-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1042RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042D4RDB: Separate from T1042RDB in KconfigYork Sun2016-11-23-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1042D4RDB in Kconfig to simplify config options. Remove macro CONFIG_T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042RDB_PI: Split from T1042RDB in KconfigYork Sun2016-11-23-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use separated TARGET_T1042RDB_PI to simplify config options. Remove macro CONFIG_T1042RDB_PI. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042: Remove macro CONFIG_PPC_T1042York Sun2016-11-23-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1042 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040RDB: Remove macro CONFIG_T1040RDBYork Sun2016-11-23-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_T1040RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>