arm-boot/u-boot-imx.git - U-boot NXP imx6

	Commit message (Collapse)	Author	Age	Lines
*	sunxi: Specify USB vbus pins for orangepi boards	Hans de Goede	2016-03-23	-0/+3
\| \| \| \| \| \| \| \|	This fixes the USB ports not working on the orangepi_plus and stops us from messing with gpio-s which we should not touch on the orangepi_pc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
*	sunxi: H3: Add support for the host usb-phys	Jelle van der Waa	2016-02-23	-0/+1
\| \| \| \| \| \| \| \|	Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
*	sunxi: power: add support for sy8106a driver	Jelle van der Waa	2016-02-23	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	SY8106A is a PMIC which is used on the Allwinner H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is implemented to set the default V-CPU voltage to 1200 mV. This driver is required to ensure the SY8106A V-CPU voltage is set to 1200 mV after a software reset. On cold boot the default SY8106A output voltage is selected to be 1200 mV by a pair of resistors on the Orange Pi PC and Plus. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
*	sunxi: Add support for the I2C controller which is part of the PRCM	Jelle van der Waa	2016-01-21	-0/+1
\| \| \| \| \| \| \| \| \| \| \|	Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
*	sunxi: Reduce Orangepi PC RAM speed to 624 MHz	Hans de Goede	2015-12-27	-1/+1
\| \| \| \| \| \| \| \| \| \|	There are some reports of stability issues at 672 MHz, see: http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit So reduce the DRAM speed to 624MHz which seems to be reliable everywhere. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
*	sunxi: select SYS_NS16550 from Kconfig	Hans de Goede	2015-12-10	-1/+0
\| \| \| \| \| \| \|	Select SYS_NS16550 from Kconfig instead of setting it in all our defconfig files. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
*	spi: Move SPI drivers to defconfig	Bin Meng	2015-11-25	-1/+0
\| \| \| \| \| \| \| \|	There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
*	sunxi: Update new defconfigs	Tom Rini	2015-11-22	-0/+1
\| \| \| \| \| \| \|	After introduction of CONFIG_SYS_NS16550 these defconfig files were added and need to be updated. Signed-off-by: Tom Rini <trini@konsulko.com>
*	sunxi: Add support for Orangepi Plus and Orangepi PC boards	Hans de Goede	2015-11-22	-0/+15
	Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com>