arm-boot/u-boot-imx.git - U-boot NXP imx6

	Commit message (Collapse)	Author	Age	Lines
*	MLK-14445-8 mx7ulp_evk: Add dynamical MMC device detection	Ye Li	2017-04-05	-0/+2
\| \| \| \| \| \| \|	Add board_late_mmc_env_init to support MMC device detection for environment variables. Signed-off-by: Ye Li <ye.li@nxp.com>
*	MLK-13547 configs: mx7ulp_evk: enable ethernet boot support	Peter Chen	2017-04-05	-0/+2
\| \| \| \| \| \| \| \| \| \|	Since we can use USB ethernet instead of local ethernet, add ethernet support for it. To use USB ethernet function at u-boot, just plug in Micro-AB cable at USBOTG1 port with USB2Ethernet adapter connected. Signed-off-by: Peter Chen <peter.chen@nxp.com> (cherry picked from commit 60ffddf87cf6b8502c5d5fc6540364adfd66ebb3) Signed-off-by: Ye Li <ye.li@nxp.com>
*	MLK-13929-6 mx7ulp_evk: Enable the MIPI DSI splashscreen	Ye Li	2017-04-05	-0/+1
\| \| \| \| \| \| \| \|	Enable and setup board level codes for MIPI DSI splashscreen on EVK board. User needs set env variable"panel=HX8363_WVGA" for displaying. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce)
*	MLK-14445-6 mx7ulp_evk: Add USB OTG0 support	Ye Li	2017-04-05	-0/+6
\| \| \| \| \| \| \|	Porting codes to support USB OTG0 on the EVK board. Convert to use DM USB driver. Signed-off-by: Ye Li <ye.li@nxp.com>
*	MLK-14445-4 mx7ulp: Fix wrong i2c configuration name	Ye Li	2017-04-05	-1/+1
\| \| \| \| \| \| \|	Wrong I2c driver configuration name is used in codes, so I2c driver is not built. Correct it. Signed-off-by: Ye Li <ye.li@nxp.com>
*	MLK-14445-3 mx7ulp_evk: Enable wdog driver for reset cpu	Ye Li	2017-04-05	-0/+1
\| \| \| \| \| \| \|	Enable the CONFIG_ULP_WATCHDOG in defconfig, so that reset command can work. Signed-off-by: Ye Li <ye.li@nxp.com>
*	MLK-14445-2 mx7ulp_evk: Add QSPI flash support	Ye Li	2017-04-05	-1/+7
\| \| \| \| \| \| \| \| \|	Porting the QSPI flash board support from v2016.03, and convert to use DM QSPI driver. Since we need to support QSPI at default in u-boot, change the default DTS file to qspi enabled DTS. Signed-off-by: Ye Li <ye.li@nxp.com>
*	imx: mx7ulp_evk: enable mmc/regulator support	Peng Fan	2017-04-05	-0/+8
\| \| \| \| \| \| \| \| \| \| \|	Enable MMC support. The fsl sdhc driver needs regulator to enable power, so enable regulator support. And bootcmd and more env. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
*	imx: imx7ulp: add EVK board support	Peng Fan	2017-04-05	-0/+17
	Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>