summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* common, ubi: add ubi check volumename commandHeiko Schocher2014-02-21-0/+31
| | | | | | | check with this ubi command, if a UBI volume with "volumename" exists in current ubi device. Signed-off-by: Heiko Schocher <hs@denx.de>
* Fix memory commands for 64-bit platformsYork Sun2014-02-21-36/+36
| | | | | | | | | For aarch64, unsigned long is 64-bit data. Memory commands should be fixed with u32 for 32-bit address access. To be clear, ushort is replace with u16, u_char is replaced with u8. Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Wolfgang Denk <wd@denx.de>
* pxe: prepend fdtdir to DTB name irrespective of sourceStephen Warren2014-02-21-37/+40
| | | | | | | | | | | | | | The directory name from an fdtdir directive in a PXE config file should always be pre-pended to the DTB filename; it shouldn't matter whether the DTB filename came from the $fdtfile environment variable, or whether it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to always prepend the directory name. Reported-by: Dennis Gilmore <dennis@ausil.us> Fixes: c61d94d86035 ("pxe: implement fdtdir extlinux.conf tag") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Dennis Gilmore <dennis@ausil.us> Tested-by: Dennis Gilmore <dennis@ausil.us>
* fix address of error message in mtest commandDavid Feng2014-02-21-5/+9
| | | | | | | | | This patch deal with error message of mtest command. When test failed, the mtest command will output error information that include memory address and value. But the address field is not correct or misleading. Signed-off-by: David Feng <fenghua@phytium.com.cn>
* common: Add get_effective_memsize() to memsize.cYork Sun2014-02-21-13/+16
| | | | | | | | | This function has been around for powerpc. It is used for systems with memory more than CONFIG_MAX_MEM_MAPPED. In case of non-contiguous memory, this feature can limit U-boot to one block without going over the limit. Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* common: Remove invalid endianess conversionChristian Eggers2014-02-21-2/+2
| | | | | | | | | | | | | | | | | | | do_bootm_standanlone() calls ntohl(images->ep) which is wrong because endianess conversion has already been done: do_bootm() \-do_bootm_states() +-bootm_find_os() | \-images.ep = image_get_ep(); | \-uimage_to_cpu(hdr->ih_ep); \-boot_selected_os() \-do_bootm_standanlone() Without this conversion the code works correctly at least on AT91SAM9G45. On big endian systems there should be no difference after applying this patch because uimage_to_cpu(x) and ntohl(x) both expand to 'x'. Signed-off-by: Christian Eggers <ceggers@gmx.de>
* fs/fdos: RemoveTom Rini2014-02-21-69/+1
| | | | | | We have an unused FAT implementation in fs/fdos, remove. Signed-off-by: Tom Rini <trini@ti.com>
* blackfin: Add <asm/clock.h> to numerous driversTom Rini2014-02-20-0/+1
| | | | | | | | | With d6a320d we moved some clock externs out of blackfin_local.h and into clock.h but now need to include <asm/clock.h> in more drivers to avoid warnings. Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Tom Rini <trini@ti.com>
* cosmetic: FIT: fix a strange commentMasahiro Yamada2014-02-19-1/+1
| | | | | | | | | | There is a strange comment in fit_image_load(). This function can be used for loading Kernel Image, FDT as well as ramdisk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* Move #ifdef(CONFIG_DISPLAY_CPUINFO) from caller to calleeMasahiro Yamada2014-02-19-2/+0
| | | | | | | | | | | | | | | | | | - When CONFIG_DISPLAY_CPUINFO is not enabled, print_cpuinfo() should be defined as an empty function in a header, include/common.h - Remove #ifdef CONFIG_DISPLAY_CPUINFO .. #endif from caller, common/board_f.c and arch/arm/lib/board.c - Remove redundant prototypes in arch/arm/lib/board.c, arch/arm/include/asm/arch-am33x/sys_proto.h and board/nokia/rx51/rx51.h, keeping the one in include/common.h - Add #ifdef CONFIG_DISPLAY_CPUINFO to the func definition where it is missing Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dts: re-write dts/Makefile more simply with KbuildMasahiro Yamada2014-02-19-1/+1
| | | | | | | | | | | Useful rules in scripts/Makefile.lib allows us to easily generate a device tree blob and wrap it in assembly code. We do not need to parse a linker script to get output format and arch. This commit deletes ./u-boot.dtb since it is a copy of dts/dt.dtb. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* kbuild: use Linux Kernel build scriptsMasahiro Yamada2014-02-19-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
* kbuild: change out-of-tree buildMasahiro Yamada2014-02-19-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
* common: spl: Add spl sata boot supportDan Murphy2014-02-19-0/+60
| | | | | | | | Add spl_sata to read a fat partition from a bootable SATA drive. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
* EXT4: Fix number base handling of "ext4write" commandWolfgang Denk2014-02-19-2/+2
| | | | | | | | | | | | | | | | | | | Unlike other commands (for example, "fatwrite"), ext4write would interpret the "sizebytes" as decimal number. This is not only inconsistend and unexpected to most users, it also breaks usage like this: tftp ${addr} ${name} ext4write mmc 0:2 ${addr} ${filename} ${filesize} Change this to use the standard notation of base 16 input format. See also commit b770e88 WARNING: this is a change to the user interface!! Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Uma Shankar <uma.shankar@samsung.com> Cc: Stephen Warren <swarren@nvidia.com>
* fdt: rename IMAAGE_OF_BOARD_SETUP to IMAGE_OF_BOARD_SETUPMasahiro Yamada2014-02-19-1/+1
| | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* cmd_test: implement -e test for file existenceStephen Warren2014-02-19-0/+6
| | | | | | | | | | This is much like a regular shell's -e operator, except that it takes multiple arguments to specify the device type and device/partition ID in addition to the usual filename: if test -e mmc 0:1 /boot/boot.scr; then echo yes; else echo no; fi Signed-off-by: Stephen Warren <swarren@nvidia.com>
* cmd_test: evaluate to false without any argumentsStephen Warren2014-02-19-1/+1
| | | | | | | | | | | | This emulates bash: $ if test; then echo yes; else echo no; fi no Currently, the code sets expr = -1 in this case, which gets mapped to 0 (true) at the end of do_test() by the logical -> shell exit code conversion. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* cmd_test: implement ! on sub-expressionsStephen Warren2014-02-19-19/+24
| | | | | | | | | | | | | | | Currently, ! can only be parsed as the first operator in an expression. This prevents the following from working: $ if test ! ! 1 -eq 1; then echo yes; else echo no; fi yes $ if test ! 1 -eq 2 -a ! 3 -eq 4; then echo yes; else echo no; fi yes Fix this by parsing ! like any other operator, and and handling it similarly to -a and -o. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* cmd_test: check for binary operators before unaryStephen Warren2014-02-19-4/+4
| | | | | | | | | | | | | | | | | This better mirrors the behaviour of bash, for example: $ if test -z = -z; then echo yes; else echo no; fi yes This is parsed as a string comparison of "-z" and "-z", since the check for the binary "=" operator occurs first. Without this change, the command would be parsed as a -z test of "-", followed by a syntax error; a trailing -z without and operand. This is a behavioural change, but I believe any commands affected were previously invalid or bizarely formed. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* cmd_test: use table lookup for parsingStephen Warren2014-02-19-67/+110
| | | | | | | | | | | | | | | | do_test() currently uses strcmp() twice to determine which operator is present; once to determine how many arguments the operator needs, then a second time to actually decode the operator and implement it. Rewrite the code so that a table lookup is used to translate the operator string to an integer, and use a more efficient switch statement to decode and execute the operator. This approach also acts as enablement for the following patches. This patch should introduce no behavioural change. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-17-14/+13
|\
| * common: lcd.c: fix data abort exception when try to access bmp headerPrzemyslaw Marczak2014-02-03-14/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Changes: - le16_to_cpu() to get_unaligned_le16() - le32_to_cpu() to get_unaligned_le32() when access fields in struct bmp header. This changes avoids data abort exception caused by unaligned data access. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2014-02-17-58/+74
|\ \
| * | cmd_mmc.c: Drop open/close mmc sub-commandsTom Rini2014-02-07-72/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The open and close mmc sub-commands implement a hard-coded set of values specific to the SMDK5250 platform. Remove these commands as what they did can be done instead with a series of mmc dev / bootpart / bootbus commands instead now. Cc: Amar <amarendra.xt@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | cmd_mmc.c: Add bootbus mmc sub-commandTom Rini2014-02-07-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a bootbus sub-command to the mmc command to allow for setting the boot_bus_width, reset_boot_bus_width and boot_mode fields of BOOT_BUS_WIDTH (EXT_CSD[177]). Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | cmd_mmc.c: Add 'partconf' command to mmcTom Rini2014-02-07-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a partconf sub-command to the mmc command to allow for setting the boot_ack, boot_partition and partition_access fields of PARTITION_CONFIG (formerly BOOT_CONFIG, EXT_CSD[179]). Part of this requires changing the check for 'part' from an strncmp to a strcmp, like the rest of the sub-commands. Cc: Andy Fleming <afleming@gmail.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | cmd_mmc.c: Rename 'bootpart' to 'bootpart-resize'Tom Rini2014-02-07-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rename 'bootpart' to 'bootpart-resize' to better reflect what this command is for. Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | cmd_mmc.c: Change 'bootpart' code to match normal coding styleTom Rini2014-02-07-4/+11
| | | | | | | | | | | | | | | | | | Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORKTom Rini2014-02-07-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use the switch CONFIG_SUPPORT_EMMC_BOOT today to enable some additional features of the eMMC boot partitions. Add support for being told that we have booted from one of these partitions to the spl framework and implement this on TI OMAP/related. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | | arc: bdinfo, image and arc-specific init functions declarations supportAlexey Brodkin2014-02-07-0/+19
|/ / | | | | | | | | | | | | | | | | Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
* | cmd_pxe.c add any option for filesystem with sysboot uses generic loadDennis Gilmore2014-02-04-3/+19
| | | | | | | | Signed-off-by: Dennis Gilmore <dennis@ausil.us>
* | Merge branch 'clk' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-02-04-0/+52
|\ \
| * | common: Add new clk commandMichal Simek2014-02-04-0/+52
| |/ | | | | | | | | | | | | | | Command provides just dump subcommand for showing clock frequencies in a soc. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | pxe: implement fdtdir extlinux.conf tagStephen Warren2014-02-04-6/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | People who write (or scripts that auto-generate) extlinux.conf don't want to know about HW-specific information such as FDT filenames. Create a new extlinux.conf tag "fdtdir" that specifies only the directory where FDT files are located, and defer all knowledge of the filename to U-Boot. The algorithm implemented is: ========== if $fdt_addr_r is set: if "fdt" tag was specified in extlinux.conf: load the FDT from the filename in the tag else if "fdtdir" tag was specified in extlinux.conf: if "fdtfile" is set in the environment: load the FDT from filename in "$fdtfile" else: load the FDT from some automatically generated filename if no FDT file was loaded, and $fdtaddr is set: # This indicates an FDT packaged with firmware use the FDT at $fdtaddr ========== A small part of an example /boot/extlinux.conf might be: ========== LABEL primary LINUX zImage FDTDIR ./ LABEL failsafe LINUX bkp/zImage FDTDIR bkp/ ========== ... with /boot/tegra20-seaboard.dtb or /boot/bkp/tegra20-seaboard.dtb being loaded by the sysboot/pxe code. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | pxe: support "devicetree" tagStephen Warren2014-02-04-0/+1
|/ | | | | | | | | The specification for extlinux.conf[1] states that "fdt" is an alias for "devicetree". To date, U-Boot only implements "fdt". Rectify that. [1] http://freedesktop.org/wiki/Specifications/BootLoaderSpec/ Signed-off-by: Stephen Warren <swarren@nvidia.com>
* board_r - fixup functions table after relocationAlexey Brodkin2014-01-27-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | This is only required for "PIC" relocation and doesn't apply to modern "PIE" relocation which does data relocation as well as code. "init_sequence_r" is just an array that consists of compile-time adresses of init functions. Since this is basically an array of integers (pointers to "void" to be more precise) it won't be modified during relocation - it will be just copied to new location as it is. As a consequence on execution after relocation "initcall_run_list" will be jumping to pre-relocation addresses. As long as we don't overwrite pre-relocation memory area init calls are executed correctly. But still it is dangerous because after relocation we don't expect initially used memory to stay untouched. Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Thomas Langer <thomas.langer@lantiq.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* spl: common: Support for USB MSD FAT image loadingDan Murphy2014-01-24-8/+76
| | | | | | | | Add SPL support to be able to detect a USB Mass Storage device connected to a USB host. Once a USB Mass storage device is detected the SPL will load the u-boot.img from a FAT partition to target address. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* spl: common: Move FAT funcs to a common fileDan Murphy2014-01-24-62/+103
| | | | | | Move the FAT functions to a common location for reuse. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* fdt_support.c: Correct linux,initrd-start/end settingTom Rini2014-01-20-2/+2
| | | | | | | | | | | The change to add 64bit initrd support broke 32bit initrd support as it always set 64bits worth of data into the properties, even on 32bit systems. The fix is to use addr_cell_len (which already says how much data is in 'tmp') to set the property, rather than always setting 8. Thanks to Stephen Warren for pointing out the fix here. Reported-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2014-01-20-3/+2
|\
| * env_eeprom - fix bus recovery for "eeprom_bus_read"Alexey Brodkin2014-01-13-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | "env_eeprom_bus" is no longer in use (it was introduced in commit 548738b4d43af841ff58c787bce297ac6a8bf7d1 "cmd_eeprom: I2C updates"). As in "eeprom_bus_write" we just reset I2C bus with the one we saved in "old_bus". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de>
* | common, env: optimize boottimeHeiko Schocher2014-01-14-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when creating the hashtable, for each environmentvariable getenv(ENV_CALLBACK_VAR) and getenv(ENV_FLAGS_VAR) is called, which costs at this point a lot of time. So call this two getenv() calls only once. Boottime on the ids8313 board without this patch: 2013-12-19 13:38:22,894: NAND: 128 MiB 2013-12-19 13:38:27,659: In: serial (~4.8 sec) Bootime with this patch on the ids8313 board: 2013-12-19 13:40:25,332: NAND: 128 MiB 2013-12-19 13:40:25,546: In: serial (~0.2 sec) Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wolfgang Denk <wd@denx.de>
* | bootm: Reinstate special case for standalone imagesSimon Glass2014-01-14-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For standalone images, bootm had a special case where the OS boot function was NULL but did actually exist. It was just called manually. This was removed by commit 35fc84fa which checks for the non-existence of this function before the special case is examined. There is no obvious reason why standalone is handled with a special case. Adjust the code so that standalone has a normal OS boot function. We still need a special case for when the function returns, but at least we can avoid the main problem. This is intended to fix the reported: ERROR: booting os 'U-Boot' (17) is not supported but needs testing. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common/image.c: move VxWorks header string out of CONFIG_CMD_ELFmiao.yan@windriver.com2014-01-14-1/+1
| | | | | | | | | | | | | | | | | | Otherwise, when booting VxWorks kernel, the incorrect message will be seen: ARM Unknown OS Kernel Image (uncompressed) Signed-off-by: Miao Yan <miao.yan@windriver.com>
* | command.c: Fix auto-completion for the full commands list caseAndrew Gabbasov2014-01-14-2/+2
| | | | | | | | | | | | | | | | | | Compiling of full list of commands does not advance the counter, so it always results in an empty list. This seems to be (inadvertently?) introduced by commit 6c7c946cadfafdea80eb930e3181085b907a0362. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2014-01-13-5/+9
|\ \
| * | sandbox: spi: Adjust 'sf test' to work on sandboxSimon Glass2014-01-11-5/+9
| |/ | | | | | | | | | | | | | | Add map_sysmem() calls so that this test works correctly on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hung-ying Tyan <tyanh@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | usb: ums: wait for usb cable connection before enter ums modePrzemyslaw Marczak2014-01-13-0/+24
|/ | | | | | | | Before this change ums mode can not be entered when device was using the same usb port for usb/uart communication. Switching USB cable from UART to USB always causes ums exit. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-01-10-41/+50
|\ | | | | | | | | | | | | | | | | | | Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be added to include/configs/exynos5-dt.h now. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-11-09 06:33:19 +0000