summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* cmd_nand: Update (nand_info_t*)nand after arg_off(_size) callRostislav Lisovy2014-09-24-2/+4
| | | | | | | | | | The arg_off() and arg_off_size() update the 'current NAND device' variable (dev). This is then used when assigning the (nand_info_t*)nand value. Place the assignment after the arg_off(_size) calls to prevent using incorrect (nand_info_t*) nand value. Signed-off-by: Rostislav Lisovy <lisovy@merica.cz>
* kconfig: move CONFIG_CMD_IMPORTENV to KconfigMasahiro Yamada2014-09-24-0/+6
| | | | | | | | | | Since CONFIG_CMD_IMPORTENV is defined in config_cmd_defaults.h, it should be enabled for all the boards except bf506f-ezkit that undefs it explicitely. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* kconfig: move CONFIG_CMD_GO to KconfigMasahiro Yamada2014-09-24-0/+6
| | | | | | | | | | Since CONFIG_CMD_GO is defined in config_cmd_defaults.h (and no board undefs it its own header), it can be moved to Kconfig with the default value "y". Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* kconfig: move CONFIG_CMD_EXPORTENV to KconfigMasahiro Yamada2014-09-24-0/+6
| | | | | | | | | | Since CONFIG_CMD_EXPORTENV is defined in config_cmd_defaults.h, it should be enabled for all the boards except bf506f-ezkit that undefs it explicitely. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* kconfig: move CONFIG_CMD_CRC32 to KconfigMasahiro Yamada2014-09-24-0/+6
| | | | | | | | | | | | | | | | | | | | | | Since CONFIG_CMD_CRC32 is defined in config_cmd_defaults.h, it is enabled for all the boards except the ones undefining it explicitly: kwb tseries_mmc tseries_nand tseries_spi vct_platinum_onenand_small vct_platinum_small vct_platinumavc_onenand_small vct_platinumavc_small vct_premium_onenand_small vct_premium_small The default value of this config option should be "y" and "# CONFIG_CMD_CRC32 is not set" should be added for those exceptions. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* kconfig: move CONFIG_CMD_BOOTM to KconfigMasahiro Yamada2014-09-24-0/+6
| | | | | | | | | | | | | CONFIG_CMD_BOOTM is defined in config_cmd_defaults.h which is forcebly included from each board. So, the default value of "config CMD_BOOTM" should be "y". For some boards undefining it (bf506f-ezkit, controlcenterd_TRAILBLA, controlcenterd_TRAILBLAZER_DEVELOP, controlcenterd_TRAILBLAZER), "# CONFIG_CMD_BOOTM is not set" should be added to their defconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* kconfig: add blank Kconfig filesMasahiro Yamada2014-09-24-0/+4
| | | | | | | | This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* sandbox: Disable Ctrl-CSimon Glass2014-09-24-0/+3
| | | | | | | | This is not supported properly on sandbox, and interferes with running tests, since when a test script is piped in, some commands will call ctrlc() which will drop characters from the test script. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb/gadget: fastboot: implement sparse formatSteve Rae2014-09-24-10/+23
| | | | | | | - add capability to "fastboot flash" with sparse format images Signed-off-by: Steve Rae <srae@broadcom.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* usb/gadget: fastboot: minor cleanupSteve Rae2014-09-24-3/+4
| | | | | | | | | | - update static function - additional debugging statements - update "fastboot command" information - add missing include file - update spelling Signed-off-by: Steve Rae <srae@broadcom.com>
* usb/gadget: fastboot: add eMMC support for flash commandSteve Rae2014-09-24-0/+85
| | | | | | - add support for 'fastboot flash' command for eMMC devices Signed-off-by: Steve Rae <srae@broadcom.com>
* spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*Nikita Kiryanov2014-09-24-13/+0
| | | | | | | | | | | | | | | | | | | | | | | Currently, CONFIG_SPL_SPI_* #defines are used for controlling SPI boot in SPL. These #defines do not allow the user to select SPI mode for the SPI flash (there's no CONFIG_SPL_SPI_MODE, so the SPI mode is hardcoded in spi_spl_load.c), and duplicate information already provided by CONFIG_SF_DEFAULT_* #defines. Kill CONFIG_SPL_SPI_*, and use CONFIG_SF_DEFAULT_* instead. Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Bo Shen <voice.shen@atmel.com> Cc: Hannes Petermaier <hannes.petermaier@br-automation.com> Cc: Michal Simek <monstr@monstr.eu> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* generic_board: do not set gd->fdt_blob unless CONFIG_OF_CONTROL=yMasahiro Yamada2014-09-16-4/+6
| | | | | | | | | gd->fdt_blob is used for FDT control of U-Boot. If CONFIG_OF_CONTROL is not defined, it is useless. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* common: fix include guards for CONFIG_MPGabriel Huau2014-09-16-2/+2
| | | | | | | | | | | | | This was breaking the build for some boards: MPC8536DS MPC8536DS_36BIT MPC8536DS_SDCARD MPC8536DS_SPIFLASH qemu-ppce500 Include only these features for some PPC boards if the configuration for MultiProcessor is enabled. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Cc: Tom Rini <trini@ti.com> Cc: York Sun <yorksun@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* implement the Android sparse image formatSteve Rae2014-09-16-53/+76
| | | | | | update to provide usable implementation to U-Boot Signed-off-by: Steve Rae <srae@broadcom.com>
* cleanup code which handles the Android sparse image formatSteve Rae2014-09-16-41/+56
| | | | | | | - port dprintf() to debug() - update formatting Signed-off-by: Steve Rae <srae@broadcom.com>
* update code which handles Android sparse image formatSteve Rae2014-09-16-2438/+0
| | | | | | - remove unnecessary functions Signed-off-by: Steve Rae <srae@broadcom.com>
* add code to handle Android sparse image formatSteve Rae2014-09-16-0/+2643
| | | | | | | | Add original file (pristine) from : https://www.codeaurora.org/cgit/quic/la/kernel/lk/plain/app/aboot/aboot.c?h=master [3b5092d20bd15a7a2879c13e9f64acc48d04af2d] Signed-off-by: Steve Rae <srae@broadcom.com>
* cmd_mem: add static to internally used functionsMasahiro Yamada2014-09-16-3/+4
| | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* kgdb: Remove first_entry for kgdbPeng Fan2014-09-16-12/+2
| | | | | | | | | | | | | | | | | | | | | There are two ways to run into handle_exception, run command 'kgdb' and encounter a breakpoint which triggers exception handling. The origin source code only saves regs when first run command 'kgdb'. Take the following for example, When run 'kgdb', regs is saved to entry_regs. When run 'bootz', regs is not saved. However, if we set a breakpoint, then continue. When breakpoint is reached, run `quit`, and Now return to the instruction which follows kgdb, but not bootz.This may cause errors. So, save regs for each handle_exception call to return to the correct place. Example: Target | Host =>kgdb | (gdb)b bootz | (gdb)c =>bootz | | (gdb)Here stop because of breakpoint | (gdb)q Signed-off-by: Peng Fan <van.freenix@gmail.com>
* Fix a few printf argument verification warningsVasili Galka2014-09-15-4/+4
| | | | | | | | | The parameters of size_t type shall be formatted using "%zu" and not using "%d". Precision argument for the "%.*s" parameters shall be of int type. Signed-off-by: Vasili Galka <vvv444@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2014-09-13-12/+29
|\
| * dm: Make driver model available before board_init()Simon Glass2014-09-10-15/+27
| | | | | | | | | | | | | | | | | | | | | | For some boards board_init() will change GPIOs, so we need to have driver model available before then. Adjust the board init to arrange this, but enable it for driver model only, just to be safe. This does create additional #ifdef logic, but it is safer than trying to make a pervasive change which may cause some boards to break. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Set up stdio earlier when using driver modelSimon Glass2014-09-10-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Since driver model registers itself with the stdio subsystem, and we want to avoid delayed registration and other complexity associated with the current serial console, move the stdio subsystem init earlier when driver model is used for serial. This simplifies the implementation. Should there be any problems with this approach they can be dealt with as boards are converted over to use driver model for serial. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: Move pre-reloc init earlier to cope with board_early_init_f()Simon Glass2014-09-10-2/+2
| | | | | | | | | | | | | | | | | | In order to support GPIO access in board_early_init_f() we must set up driver model before this function is called. In any case, earlier is better since driver model is (or will become) a key function for most init. Signed-off-by: Simon Glass <sjg@chromium.org>
* | board_r: ARM[64] do not set gd againJeroen Hofstee2014-09-09-1/+1
|/ | | | | | | | | For ARM / ARM64 the relocation routines already updated gd to the new value. Don't set it again. This allows compilation with clang as it cannot update gd directly. cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* Merge git://git.denx.de/u-boot-usbTom Rini2014-09-02-4/+19
|\
| * dfu: Provide means to find difference between dfu-util -e and -RLukasz Majewski2014-09-02-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit provides distinction between DFU device detach and reset. The -R behavior is preserved with proper handling of the dfu-util's -e switch, which detach the DFU device. By running dfu-util -e; one can force device to finish the execution of dfu command on target and execute some other scripted commands. Moreover, some naming has been changed - the dfu_reset() method now is known as dfu_detach(). New name better reflects the purpose of the code. It was also necessary to increase the number of usb_gadget_handle_interrupts() calls since we also must wait for detection of the USB reset event. Example usage: 1. -e (detach) switch dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e access to u-boot prompt. 2. -R (reset) switch dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage target board reset Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* | dm: gpio: Allow gpio command to adjust GPIOs that are busySimon Glass2014-08-31-3/+6
| | | | | | | | | | | | | | | | | | | | The gpio command mostly relies on gpio_request() and gpio_free() being nops, in that you can request a GPIO twice. With driver model this is now implemented correctly, so it fails. Change the command to deal with a failure to claim the GPIO. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: gpio: Enhance gpio command to show only active GPIOsSimon Glass2014-08-31-32/+69
|/ | | | | | | | | | | | The GPIO list is very long in many cases and most of them are not used. By default, show only the GPIOs that are in use, and provide a flag to show all of them. This makes the 'gpio status' command much more pleasant. In order to do this, driver model now exposes a method for obtaining the 'function' of a GPIO, which describes whether it is an input or output, for example. Implementation of this method is optional. Signed-off-by: Simon Glass <sjg@chromium.org>
* cmd_bootm.c: Add 'booti' for ARM64 Linux kernel ImagesTom Rini2014-08-30-0/+140
| | | | | | | | | | | | | The default format for arm64 Linux kernels is the "Image" format, described in Documentation/arm64/booting.txt. This, along with an optional gzip compression on top is all that is generated by default. The Image format has a magic number within the header for verification, a text_offset where the Image must be run from, an image_size that includes the BSS and reserved fields. This does not support automatic detection of a gzip compressed image. Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2014-08-29-7/+5
|\
| * common/Makefile: Consolidate SPL ENV options, correct inclusionTom Rini2014-08-25-7/+5
| | | | | | | | | | | | | | CONFIG_SPL_NET_SUPPORT is not the only time we want SPL to ahve environment, CONFIG_SPL_ENV_SUPPORT is when we want it. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge git://git.denx.de/u-boot-usbTom Rini2014-08-29-5/+25
|\ \
| * | usb: hub: don't check CONNECTION in hub_port_reset()Stephen Warren2014-08-29-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One specific USB 3.0 device behaves strangely when reset by usb_new_device()'s call to hub_port_reset(). For some reason, the device appears to briefly drop off the bus when this second bus reset is executed, yet if we retry this loop, it'll eventually come back after another two resets. If USB bus reset is executed over and over within usb_new_device()'s call to hub_port_reset(), I see the following sequence of results, which repeats as long as you want: 1) STAT_C_CONNECTION = 1 STAT_CONNECTION = 0 USB_PORT_STAT_ENABLE 0 2) STAT_C_CONNECTION = 1 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 0 3) STAT_C_CONNECTION = 1 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 1 The device in question is a SanDisk Ultra USB 3.0 16GB memory stick with USB VID/PID 0x0781/0x5581. In order to allow this device to work with U-Boot, ignore the {C_,}CONNECTION bits in the status/change registers, and only use the ENABLE bit to determine if the reset was successful. To be honest, extensive investigation has failed to determine why this problem occurs. I'd love to know! I don't know if it's caused by: * A HW bug in the device * A HW bug in the Tegra USB controller * A SW bug in the U-Boot Tegra USB driver * A SW bug in the U-Boot USB core This issue only occurs when the device's USB3 pins are attached to the host; if only the USB2 pins are connected the issue does not occur. The USB3 controller on Tegra is in reset, so is not actively communicating with the device at all - a USB3 analyzer confirms this. Slightly unplugging the device (so the USB3 pins don't contact) or using a USB2 cable or hub as an intermediary avoids the problem. For some reason, the Linux kernel (either on the same Tegra board, or on an x86 host) has no issue with the device, and I observe no disconnections during reset. This change won't affect any USB device that already works, since such devices could not currently be triggering the error return this patch removes, or they wouldn't be working currently. However, this patch is quite reliable in practice, hence I hope it's acceptable to solve the problem. The only potential fallout I can see from this patch is: * A broken device that triggers C_CONNECTION/!CONNECTION now causes the loop in hub_port_reset() to run multiple times. If it never succeeds, this will cause "usb start" to take roughly 1s extra to execute. * If the user unplugs a device while hub_port_reset() is executing, and very quickly swaps in a new device, hub_port_reset() might succeed on the new device. This would mean that any information cached about the original device (from the descriptor read in usb_new_device(), which simply caches the max packet size) might be invalid, which would cause problems talking to the new device. However, without this change, the new device wouldn't work anyway, so this is probably not much of a loss. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | usb: Handle -ENODEV from usb_lowlevel_init()Marek Vasut2014-08-29-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we support both Host and Device mode operation, an OTG controller can return -ENODEV on a port which it found to be in Device mode during Host mode scan for devices. In case -ENODEV is returned, print that the port is not available and continue instead of screaming a bloody error message. Signed-off-by: Marek Vasut <marex@denx.de>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-08-29-4/+4
|\ \ \
| * | | mx6: add support of multi-processor commandGabriel Huau2014-08-20-4/+4
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | This allows u-boot to load different OS or Bare Metal application on different cores of the i.MX6 SoC. For example: running Android on cpu0 and a RT OS like QNX/FreeRTOS on cpu1. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* | | Fix test failure caused by bad handling of ramdiskSimon Glass2014-08-28-2/+3
| |/ |/| | | | | | | | | | | | | | | | | | | Commit e3a5bbce broke the FIT image tests by not loading a ramdisk even if a load address is provided in the FIT. The rationale was that a load address of 0 should be considered to mean 'do not load'. Add a new load operation which supports this feature, so that the ramdisk will be loaded if a non-zero load address is provided. Signed-off-by: Simon Glass <sjg@chromium.org>
* | mtd, ubi, ubifs: resync with Linux-3.14Heiko Schocher2014-08-25-28/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | resync ubi subsystem with linux: commit 455c6fdbd219161bd09b1165f11699d6d73de11c Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sun Mar 30 20:40:15 2014 -0700 Linux 3.14 A nice side effect of this, is we introduce UBI Fastmap support to U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Joerg Krause <jkrause@posteo.de>
* | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2014-08-25-0/+1
|\ \
| * | mtdparts: fix usecount bugHeiko Schocher2014-08-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | add missing put_mtd_device, so mtd->usecount gets correct decremented in get_mtd_info(). Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Tom Rini <trini@ti.com>
* | | nios2: add generic board supportThomas Chou2014-08-24-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the generic board init as described in doc/README.generic-board. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com> Reviewed-by: Stefan Roese <sr@denx.de>
* | | bootm: make sure pass NULL when argc < 1Bryan Wu2014-08-21-2/+3
| | | | | | | | | | | | | | | | | | arg[0] might not be NULL even if argc < 1, so fix this as before. Signed-off-by: Bryan Wu <pengw@nvidia.com>
* | | image: fix bootm failure for FIT imageBryan Wu2014-08-21-18/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b3dd64f5d537 "bootm: use genimg_get_kernel_addr()" introduced a bug for booting FIT image. It's because calling fit_parse_config() twice will give us wrong value in img_addr. Add a new function genimg_get_kernel_addr_fit() whichl will always return fit_uname_config and fit_uname_kernel for CONFIG_FIT. genimg_get_kernel_addr() will ignore those to parameters. Reported-by: York Sun <yorksun@freescale.com> Signed-off-by: Bryan Wu <pengw@nvidia.com>
* | | pxe: Allow use of environment variables in append stringHans de Goede2014-08-21-16/+13
| | | | | | | | | | | | | | | | | | | | | Use cli_simple_process_macros, so that environment variables (e.g. ${console}) can be used in append strings. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | cli: Export cli_simple_process_macros for use outside of cli_simpleHans de Goede2014-08-21-2/+2
|/ / | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini2014-08-12-11/+34
|\ \
| * | support blackfin board initialization in generic board_fSonic Zhang2014-08-07-11/+34
| |/ | | | | | | | | | | | | | | | | - init hardware watchdog if applicable - use CONFIG_SYS_MONITOR_LEN as the gd monitor len for Blackfin - reserve u-boot memory at the top field of the RAM for Blackfin - avoid refer to CONFIG_SYS_MONITOR_LEN, which is not defined by Blackfin Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | lcd: support displaying 24bpp BMPs on >= 24bpp LCDsHannes Petermaier2014-08-11-3/+20
| | | | | | | | | | | | | | | | | | | | most todays LCDs support 32bpp e.g. the framebuffer memory is 32bpp organized. To support 24bpp BMPs we need to take only 3 byte from the bpp and set one byte from the FB to 0. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
generated by cgit v1.1 at 2024-10-30 13:04:06 +0000