summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* drivers: Introduce a simplified remoteproc frameworkNishanth Menon2015-10-22-0/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many System on Chip(SoC) solutions are complex with multiple processors on the same die dedicated to either general purpose of specialized functions. Many examples do exist in today's SoCs from various vendors. Typical examples are micro controllers such as an ARM M3/M0 doing a offload of specific function such as event integration or power management or controlling camera etc. Traditionally, the responsibility of loading up such a processor with a firmware and communication has been with a High Level Operating System(HLOS) such as Linux. However, there exists classes of products where Linux would need to expect services from such a processor or the delay of Linux and operating system being able to load up such a firmware is unacceptable. To address these needs, we need some minimal capability to load such a system and ensure it is started prior to an Operating System(Linux or any other) is started up. NOTE: This is NOT meant to be a solve-all solution, instead, it tries to address certain class of SoCs and products that need such a solution. A very simple model is introduced here as part of the initial support that supports microcontrollers with internal memory (no MMU, no execution from external memory, or specific image format needs). This basic framework can then (hopefully) be extensible to other complex SoC processor support as need be. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-10-21-186/+230
|\
| * cmd: bootvx: Add asmlinkage to the VxWorks x86 entryBin Meng2015-10-21-0/+6
| | | | | | | | | | | | | | | | VxWorks on x86 uses stack to pass parameters. Reported-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * cmd: bootvx: Pass E820 information to an x86 VxWorks kernelBin Meng2015-10-21-0/+30
| | | | | | | | | | | | | | | | | | | | E820 is critical to the kernel as it provides system memory map information. Pass it to an x86 VxWorks kernel. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
| * cmd: bootvx: Always get VxWorks bootline from envBin Meng2015-10-21-53/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far VxWorks bootline can be contructed from various environment variables, but when these variables do not exist we get these from corresponding config macros. This is not helpful as it requires rebuilding U-Boot, and to make sure these config macros take effect we should not have these environment variables. This is a little bit complex and confusing. Now we change the logic to always contruct the bootline from environments (the only single source), by adding two new variables "bootdev" and "othbootargs", and adding some comments about network related settings mentioning they are optional. The doc about the bootline handling is also updated. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
| * cmd: bootvx: Pass netmask and gatewayip to VxWorks bootlineBin Meng2015-10-21-2/+15
| | | | | | | | | | | | | | | | | | There are fields in VxWorks bootline for netmask and gatewayip. We can get these from U-Boot environment variables and pass them to VxWorks, just like ipaddr and serverip. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * cmd: bootvx: Avoid strlen() calls when constructing VxWorks bootlineBin Meng2015-10-21-10/+10
| | | | | | | | | | | | | | | | Remember the position in the VxWorks bootline buffer to avoid the call to strlen() each time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr()Bin Meng2015-10-21-82/+79
| | | | | | | | | | | | | | | | Move load_elf_image_phdr() and load_elf_image_shdr() to the beginning of the cmd_elf.c so that forward declaration is not needed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * cmd: Clean up cmd_elf a little bitBin Meng2015-10-21-98/+73
| | | | | | | | | | | | | | | | | | This commit cleans up cmd_elf.c per U-Boot coding convention, and removes the unnecessary DECLARE_GLOBAL_DATA_PTR and out-of-date powerpc comments (it actually supports not only powerpc targets). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * cmd: Convert CONFIG_CMD_ELF to KconfigBin Meng2015-10-21-0/+6
| | | | | | | | | | | | Convert CONFIG_CMD_ELF to Kconfig and tidy up affected boards. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
| * malloc_simple: Add debug() informationSimon Glass2015-10-21-0/+4
| | | | | | | | | | | | | | | | | | It's useful to get a a trace of memory allocations in early init. Add a debug() call to provide that. It can be enabled by adding '#define DEBUG' to the top of the file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | malloc_simple: Add support for switching to DRAM heapHans de Goede2015-10-20-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | malloc_simple uses a part of the stack as heap, initially it uses SYS_MALLOC_F_LEN bytes which typically is quite small as the initial stacks sits in SRAM and we do not have that much SRAM to work with. When DRAM becomes available we may switch the stack from SRAM to DRAM to give use more room. This commit adds support for also switching to a new bigger malloc_simple heap located in the new stack. Note that this requires spl_init to be called before spl_relocate_stack_gd which in practice means that spl_init must be called from board_init_f. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
* | malloc_simple: Add Kconfig option for using only malloc_simple in the SPLHans de Goede2015-10-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | common/dlmalloc.c is quite big, both in .text and .data usage, therefor on some boards the SPL is build to use only malloc_simple.c and not the dlmalloc.c code. This is done in various include/configs/foo.h with the following construct: #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MALLOC_SIMPLE #endif This commit introduces a SPL_MALLOC_SIMPLE Kconfig bool which allows selecting this functionality through Kconfig instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
* | spl: spl_relocate_stack_gd: Do not unnecessarily clear bssHans de Goede2015-10-20-3/+0
|/ | | | | | | | | spl_relocate_stack_gd only gets called from arch/arm/lib/crt0.S which clears the bss directly after calling it, so there is no need to clear it from spl_relocate_stack_gd. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* image-fit: Fix signature checkingAndrej Rosano2015-10-19-1/+3
| | | | | | | On signature verification failures fit_image_verify() should exit with error. Signed-off-by: Andrej Rosano <andrej@inversepath.com>
* env_eeprom.c: Correct using saved environmentLudger Dreier2015-10-12-89/+77
| | | | | | | | | The changes in ed6a5d4 unintentionally broke support for reading the environment saved to eeprom back. To correct this the crc-check and decision on which environment to use is now moved to env_relocate_spec. This is done for both the "redundant env" and the "single env" case. Signed-off-by: Ludger Dreier <ludger.dreier@keymile.com>
* common/image.c: Make boot_get_ramdisk() perform a check for Android imagesTom Rini2015-10-11-0/+9
| | | | | | | | | | | | | | | In 2dd4632 the check for where a ramdisk is found on an Android image was got moved into the "normal" loop here, causing people to have to pass the kernel address in the ramdisk address location in order to have Android boot still. This changed previous behavior so perform a check early in the function to see if we have an Android image and if so use that as where to look for the ramdisk (which is what the rest of the code here expects). We allow for this to still be overridden with an explicit ramdisk address to be passed as normal. Cc: Rob Herring <robh@kernel.org> Reported-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tom Rini <trini@konsulko.com>
* image: fix support for Android boot images with no ramdiskRob Herring2015-10-11-1/+3
| | | | | | | | If an Android boot image does not contain a ramdisk, make sure rd_len and rd_data are returned to indicate no ramdisk rather than just relying on returning an error. Signed-off-by: Rob Herring <robh@kernel.org>
* Add support for LZ4 decompression algorithmJulius Werner2015-10-11-0/+10
| | | | | | | | | | | | | | | This patch adds support for LZ4-compressed FIT image contents. This algorithm has a slightly worse compression ration than LZO while being nearly twice as fast to decompress. When loading images from a fast storage medium this usually results in a boot time win. Sandbox-tested only since I don't have a U-Boot development system set up right now. The code was imported unchanged from coreboot where it's proven to work, though. I'm mostly interested in getting this recognized by mkImage for use in a downstream project. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* common/armflash: load_image returns success or failureRyan Harkin2015-10-11-5/+6
| | | | | | | | | | | | | | | | Change the load_image so that it returns success or failure of the command (using CMD_RET_SUCCESS or CMD_RET_FAILURE). This way, hush scripts can optionally load different files depending upon the system configuration. A simple example: if afs load ${kernel_name} ${kernel_addr}; then echo loaded; else echo \ not loaded; fi Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* common/armflash: add command to check if image existsRyan Harkin2015-10-11-1/+21
| | | | | | | | | | | | | | | | Add a command to the ARM flash support to check if an image exists or not. If the image is found, it will return CMD_RET_SUCCESS, else CMD_RET_FAILURE. This allows hush scripts to conditionally load images. A simple example: if afs exists ${kernel_name}; then echo found; else echo \ not found; fi Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* net: avoid eth_unregister() call when function is unavailableBernhard Nortmann2015-09-29-0/+2
| | | | | | | | | | | | | | CONFIG_NETCONSOLE causes common/bootm.c to call eth_unregister() for network device shutdown. However, with CONFIG_DM_ETH this function is no longer defined. This is a workaround to avoid the call in that case, and solely rely on eth_halt(). In case this is insufficient, a proper way to unregister / remove network devices needs to be implemented. Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* malloc_simple: fix malloc_ptr calculationPhilipp Rosenberger2015-09-28-1/+1
| | | | | | | | | The gd->malloc_ptr and the gd->malloc_limit are offsets to gd->malloc_base. But the addr variable contains the absolute address. The new_ptr must be: addr + bytes - gd->malloc_base. Signed-off-by: Philipp Rosenberger <ilu@linutronix.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
* drivers/net/vsc9953: Add commands for VLAN ingress filteringCodrin Ciubotariu2015-09-21-0/+65
| | | | | | | | | | | | | | | | The command: ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port can be used to enable/disable/show VLAN ingress filtering on a port. This command has also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/net/vsc9953: Add command for shared/private VLAN learningCodrin Ciubotariu2015-09-21-0/+65
| | | | | | | | | | | | | | | | The command: ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private" configures the FDB to share the FDB entries learned on multiple VLANs or to keep them separated. By default, the FBD uses private VLAN learning. This command has also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/net/vsc9953: Add VLAN commands for VSC9953Codrin Ciubotariu2015-09-21-0/+270
| | | | | | | | | | | | | | | | | | | | | | | The new added commands can be used to configure VLANs for a port on both ingress and egress. The new commands are: ethsw [port <port_no>] pvid { [help] | show | <pvid> } - set/show PVID (ingress and egress VLAN tagging) for a port; ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> } - add a VLAN to a port (VLAN members); ethsw [port <port_no>] untagged { [help] | show | all | none | pvid } - set egress tagging mod for a port" ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - Configure VID source for egress tag. Tag's VID could be the frame's classified VID or the PVID of the port These commands have also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953Codrin Ciubotariu2015-09-21-0/+178
| | | | | | | | | | | | | | | | | The new command: ethsw [port <port_no>] [vlan <vid>] fdb { [help] | show | flush | { add | del } <mac> } Can be used to add and delete FDB entries. Also, the command can be used to show entries from the FDB tables. When used with [port <port_no>] and [vlan <vid>], only the matching the FDB entries can be seen or flushed. The command has also been added to the generic ethsw parser from cmd_ethsw.c. Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* common/env_flags.c: Add function to validate a MAC addressCodrin Ciubotariu2015-09-21-13/+27
| | | | | | | | | | | | The code that checks if a string has the format of a MAC address has been moved to a separate function called eth_validate_ethaddr_str(). This has been done to allow other components (such as vsc9953 driver) to validate a MAC address. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/net/vsc9953: Add commands to enable/disable HW learningCodrin Ciubotariu2015-09-21-0/+60
| | | | | | | | | | | | | | The command: ethsw [port <port_no>] learning { [help] | show | auto | disable } can be used to enable/disable HW learning on a port. This patch also adds this command to the generic ethsw parser from cmd_ethsw. Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/net/vsc9953: Add command to show/clear port countersCodrin Ciubotariu2015-09-21-0/+42
| | | | | | | | | | | | | | The new added command: ethsw [port <port_no>] statistics { [help] | [clear] } will print counters like the number of Rx/Tx frames, number of Rx/Tx bytes, number of Rx/Tx unicast frames, etc. This patch also adds this commnd in the genereric ethsw parser from cmd_ethsw.c Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* common/cmd_ethsw: Add generic commands for Ethernet SwitchesCodrin Ciubotariu2015-09-21-0/+348
| | | | | | | | | | | | | | This patch creates a flexible parser for Ethernet Switch configurations that should support complex commands. The parser searches for predefined keywords in the command and calls the proper function when a match is found. Also, the parser allows for optional keywords, such as "port", to apply the command on a port or on all ports. For now, the defined commands are: ethsw [port <port_no>] { enable | disable | show } Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* cli_simple.c: fix possible overflow when copying the stringImran Zaman2015-09-15-1/+1
| | | | | | | Bigger source buffer than dest buffer could overflow when copying strings. Source and destination buffer sizes are same now. Signed-off-by: Imran Zaman <imran.zaman@intel.com>
* Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass2015-09-11-0/+9
| | | | | | | Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* Move malloc_cache_aligned() to its own headerSimon Glass2015-09-11-1/+1
| | | | | | | | | | | | | | | | | | | At present malloc.h is included everywhere since it recently was added to common.h in this commit: 4519668 mtd/nand/ubi: assortment of alignment fixes This seems wasteful and unnecessary. We have been trying to trim down common.h and put separate functions into separate header files and that change goes in the opposite direction. Move malloc_cache_aligned() to a new header so that this can be avoided. The header would perhaps be better named as alignmem.h but it needs to be included after common.h and people might be confused by this. With the name memalign.h it fits nicely after malloc() in most cases. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* dfu: command: Extend "dfu" command to handle receiving data via TFTPLukasz Majewski2015-09-07-0/+20
| | | | | | | | The "dfu" command has been extended to support transfers via TFTP protocol. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* update: tftp: dfu: Extend update_tftp() function to support DFULukasz Majewski2015-09-07-12/+40
| | | | | | | | | | | | | | | This code allows using DFU defined mediums for storing data received via TFTP protocol. It reuses and preserves functionality of legacy code at common/update.c. The update_tftp() function now accepts parameters - namely medium device name and its number (e.g. mmc 1). Without this information passed old behavior is preserved. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* tftp: update: Allow some parts of the code to be reused when ↵Lukasz Majewski2015-09-07-8/+7
| | | | | | | | | | | | CONFIG_SYS_NO_FLASH is set Up till now it was impossible to use code from update.c when system was not equipped with raw FLASH memory. Such behavior prevented DFU from reusing this code. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* rockchip: Add support for the SPI imageSimon Glass2015-09-02-0/+1
| | | | | | | | | | | | The Rockchip boot ROM requires a particular file format for booting from SPI. It consists of a 512-byte header encoded with RC4, some padding and then up to 32KB of executable code in 2KB blocks, separated by 2KB empty blocks. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. This allows booting from SPI flash on supported machines. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Add support for the SD imageSimon Glass2015-09-02-0/+1
| | | | | | | | | | | The Rockchip boot ROM requires a particular file format. It consists of 64KB of zeroes, a 512-byte header encoded with RC4, and then some executable code. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Add the rkimage format to mkimageSimon Glass2015-09-02-0/+1
| | | | | | | | Rockchip SoCs require certain formats for code that they execute, The simplest format is a 4-byte header at the start of a binary file. Add support for this so that we can create images that the boot ROM understands. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2015-08-31-22/+698
|\
| * dm: tpm: Add a 'tpmtest' commandSimon Glass2015-08-31-0/+575
| | | | | | | | | | | | | | | | | | | | These tests come from Chrome OS code. They are not particularly tidy but can be useful for checking that the TPM is behaving correctly. Some knowledge of TPM operation is required to use these. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Add a 'tpm info' commandSimon Glass2015-08-31-0/+26
| | | | | | | | | | | | | | | | | | Add a command to display basic information about a TPM such as the model and open/close state. This can be useful for debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Check that parse_byte_string() has data to parseSimon Glass2015-08-31-0/+2
| | | | | | | | | | | | | | | | | | Rather then crashing when there is no data, print an error. The error is printed by the caller to parse_byte_string(). Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Report tpm errors on the command lineSimon Glass2015-08-31-22/+24
| | | | | | | | | | | | | | | | | | | | | | When a 'tpm' command fails, we set the return code but give no indication of failure. This can be confusing. Add an error message when any tpm command fails. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * dm: i2c: Add a command to adjust the offset lengthSimon Glass2015-08-31-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C chips can support a register offset, with registers accessible by sending this offset as the first part of any read or write transaction. Most I2C chips have a single byte offset, thus the offset length is 1. This provides access for up 256 registers. However other offset lengths are supported, including 0. Add a command to provide access to the offset length from the command line. This allows the offset length to be read or written. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * dm: tpm: Convert the TPM command and library to driver modelSimon Glass2015-08-31-0/+26
| | | | | | | | | | | | | | | | | | Add driver model support to the TPM command and the TPM library. Both support only a single TPM at present. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Add Kconfig options for TPMsSimon Glass2015-08-31-0/+12
| | | | | | | | | | | | | | | | | | Add new Kconfig options for TPMs in preparation for moving boards to use Kconfig for TPM configuration. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2015-08-30-1/+4
|\ \ | |/ |/|
| * common/lcd_simplefb: Add support for 32bit organized framebuffersHannes Petermaier2015-07-23-1/+4
| | | | | | | | Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
generated by cgit v1.1 at 2024-11-07 17:38:17 +0000