summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* x86: Allow use of serial soon after relocationSimon Glass2016-03-17-0/+7
| | | | | | | | | | | | | | | At present on x86 machines with use cache-as-RAM, the memory goes away just before board_init_r() is called. This means that serial drivers are no-longer unavailable, until initr_dm() it called, etc. Any attempt to use printf() within this period will cause a hang. To fix this, mark the serial devices as 'unavailable' when it is no-longer available. Bring it back when serial_initialize() is called. This means that the debug UART will be used instead for this period. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: timer: Correct timer init ordering after relocationSimon Glass2016-03-17-1/+3
| | | | | | | | | | | Commit 1057e6c broke use of the timer with driver model. If the timer is used before relocation, then it becomes broken after relocation. This prevents some x86 boards from booting. Fix it. Fixes: 1057e6c (timer: Set up the real timer after driver model is available) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* malloc_simple: Add a little more debuggingSimon Glass2016-03-17-2/+5
| | | | | | | | Output the pointer returned by each call to malloc(). This can be useful when debugging memory problems. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* spl_nor: fix warning when compiled for 64bit targetMasahiro Yamada2016-03-15-1/+1
| | | | | | | Fix "warning: cast to pointer from integer of different size". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* efi_loader: Call fdt preparation functionsAlexander Graf2016-03-15-3/+5
| | | | | | | | | | | We have a nice framework around image fils to prepare a device tree for OS execution. That one patches in missing device tree nodes and fixes up the memory range bits. We need to call that one from the EFI boot path too to get all those nice fixups. This patch adds the call. Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: Implement memory allocation and mapAlexander Graf2016-03-15-0/+3
| | | | | | | | | | | | | | | | | | | The EFI loader needs to maintain views of memory - general system memory windows as well as used locations inside those and potential runtime service MMIO windows. To manage all of these, add a few helpers that maintain an internal representation of the map the similar to how the EFI API later on reports it to the application. For allocations, the scheme is very simple. We basically allow allocations to replace chunks of previously done maps, so that a new LOADER_DATA allocation for example can remove a piece of the RAM map. When no specific address is given, we just take the highest possible address in the lowest RAM map that fits the allocation size. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Simon Glass <sjg@chromium.org>
* efi_loader: Add runtime servicesAlexander Graf2016-03-15-0/+4
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-03-14-107/+240
|\
| * dm: usb: Convert USB storage to use driver-model for block devsSimon Glass2016-03-14-6/+135
| | | | | | | | | | | | | | | | | | | | Update this code to support CONFIG_BLK. Each USB storage device can have one or more block devices as children, each one representing a LUN (logical unit) of the USB device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: usb: Tidy up storage code ready for driver model conversionSimon Glass2016-03-14-56/+61
| | | | | | | | | | | | | | | | | | | | Adjust a few things so that the addition of driver-models support involved adding code rather than also changing it. This makes the patches easier to review. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: usb: Avoid exceeding available array size for storage devicesSimon Glass2016-03-14-7/+7
| | | | | | | | | | | | | | | | | | | | The limit on storage devices is USB_MAX_STOR_DEV but we use one extra element while probing to see if a device is a storage device. Avoid this, since it causes memory corruption. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: block: Adjust device calls to go through helpers functionSimon Glass2016-03-14-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | To ease conversion to driver model, add helper functions which deal with calling each block device method. With driver model we can reimplement these functions with the same arguments. Use inline functions to avoid increasing code size on some boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: block: Rename device number member dev to devnumSimon Glass2016-03-14-7/+7
| | | | | | | | | | | | | | | | | | This is a device number, and we want to use 'dev' to mean a driver model device. Rename the member. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: part: Rename some partition functionsSimon Glass2016-03-14-11/+9
| | | | | | | | | | | | | | | | Rename three partition functions so that they start with part_. This makes it clear what they relate to. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: blk: Rename get_device_and_partition()Simon Glass2016-03-14-2/+2
| | | | | | | | | | | | | | | | | | | | Rename this function to blk_get_device_part_str(). This is a better name because it makes it clear that the function returns a block device and parses a string. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: blk: Rename get_dev() to blk_get_dev()Simon Glass2016-03-14-2/+2
| | | | | | | | | | | | | | | | | | The current name is too generic. Add a 'blk_' prefix to aid searching and make its purpose clearer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-14-28/+28
| | | | | | | | | | | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* | lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start valueStefan Roese2016-03-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The original name of this function is unclear. This patch renames this CRC16 function to crc16_ccitt() matching its name with its implementation. To make the usage of this function more flexible, lets add the CRC start value as parameter to this function. This way it can be used by other functions requiring different start values than 0 as well. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | common: image-fit: Fix load and entry addresses in FIT imageYork Sun2016-03-14-5/+17
| | | | | | | | | | | | | | | | FIT image supports more than 32 bits in addresses by using #address-cell field. Fixing 64-bit support by using this field. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | common: image-fit: Use a common function to get addressYork Sun2016-03-14-23/+19
| | | | | | | | | | | | | | | | FIT image supports load address and entry address. Getting these addresses can use a common function. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | spl: Support loading a FIT from MMCSimon Glass2016-03-14-18/+57
| | | | | | | | | | | | | | Detect a FIT when loading from MMC and handle it using the new FIT SPL support. Signed-off-by: Simon Glass <sjg@chromium.org>
* | spl: Add an option to load a FIT containing U-BootSimon Glass2016-03-14-0/+195
| | | | | | | | | | | | | | | | This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* | image: Add functions to obtain short namesSimon Glass2016-03-14-4/+22
| | | | | | | | | | | | | | Sometimes it is useful to obtain the short name for an Operating System, architecture or compression mechanism. Provide functions for this. Signed-off-by: Simon Glass <sjg@chromium.org>
* | fdt: Allow libfdt to be used in SPLSimon Glass2016-03-14-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Add an option to enable libfdt in SPL. This can be useful when decoding FIT files in SPL. We need to make sure this option is not enabled in SPL by this change. Also this option needs to be enabled in host builds. Si add a new IMAGE_USE_LIBFDT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass2016-03-14-24/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
* | common: Add support for environment file in EXT4.Stuart Longland2016-03-14-0/+129
|/ | | | | | This is an enhancement that permits storing the environment file on an EXT4 partition such as the root filesystem. It is based on the existing FAT environment file code.
* malloc: remove !gd handlingStephen Warren2016-03-08-1/+1
| | | | | | | | | | | | | Following the previous patch, malloc() is never called before gd is set, so we can remove the special-case check for this condition. This reverts commit 854d2b9753e4 "dlmalloc: ensure gd is set for early alloc". Cc: Rabin Vincent <rabin@rab.in> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* timer: Set up the real timer after driver model is availableSimon Glass2016-02-26-2/+18
| | | | | | | | | When using the early timer, we need to manually trigger setting up the real timer. This will not happen automatically. Do this immediately after starting driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Revert "image-fit: Fix signature checking"Simon Glass2016-02-26-3/+8
| | | | | | | | | | | | | This reverts commit 84ca65aa4bd0d03867e9e49805201d0564d3ffb0. On signature verification failures fit_image_verify() should NOT exit with error. Only keys marked 'required' can cause image verification failure. This logic is already there and works correctly. Add a comment to make this clear. Fixes: 84ca65aa (image-fit: Fix signature checking) Signed-off-by: Simon Glass <sjg@chromium.org>
* image: Correct the OS location code to work on sandboxSimon Glass2016-02-26-1/+6
| | | | | | | | | | | | | | A recent change broke the 'bootm' command on sandbox. The root cause is using a pointer as an address. Conversion from pointer to address needs to use map_to_sysmem() so that sandbox can do the right thing. The problem was pre-existing but uncovered by a recent commit. Fix this. Also move fit_get_end() to the C file to avoid needing to include mapmem.h (and thus asm/io.h) everywhere. Fixes: 1fec3c5d (common/image.c: Make boot_get_ramdisk() perform a check for Android images) Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FSGuillaume GARDET2016-02-19-1/+1
| | | | | | | | | | | | | | | | | | | Since commit fd61d39970b9901217efc7536d9f3a61b4e1752a: spl: mmc: add break statements in spl_mmc_load_image() RAW and FS boot modes are now exclusive again. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to try MMCSD_MODE_FS then. It has been tested on a beaglebone black to boot on an EXT partition. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
* tools: fix env_flags buildLubomir Rintel2016-02-15-0/+1
| | | | | | | | | | | | | | | | | $ make tools-all ... In file included from tools/env/env_flags.c:1:0: tools/env/../../common/env_flags.c: In function ‘env_flags_parse_varaccess_from_binflags’: tools/env/../../common/env_flags.c:156:18: warning: implicit declaration of function ‘ARRAY_SIZE’ [-Wimplicit-function-declaration] for (i = 0; i < ARRAY_SIZE(env_flags_varaccess_mask); i++) ^ Seems like the other utilities just add a copy of ARRAY_SIZE since there's nowhere to include it from (tools/imagetool.h, tools/mxsimage.h). Let's do the same here. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2016-02-11-0/+8
|\
| * dm: video: Add a temporary work-around for old stdout varSimon Glass2016-02-11-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Boards with a saved environment may use 'lcd' in their stdout environment variable, expecting that this will enable output to the LCD. When the board moves to use driver model for video, this will no-longer work. Add a work-around to fix this. A warning messages is printed, and we will remove the work-around at the end of 2016. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com>
* | Revert "common/memsize.c: Simplify RAM size detection"Hans de Goede2016-02-10-21/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit breaks bootup on sunxi boards, the get stuck when running the main u-boot binary at: CPU: Allwinner H3 (SUN8I) I2C: ready DRAM: This reverts commit 8e7cba048baae68ee0916a8f52b4304277328d5e. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.David Müller (ELSOFT AG)2016-02-08-118/+0
| | | | | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
* | board_r: fix a typo in comment blockMasahiro Yamada2016-02-08-1/+1
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | image: fix getenv_bootm_size() function againMasahiro Yamada2016-02-08-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | Commit 9c11135ce053 ("image: fix getenv_bootm_size() function") fixed the case where "bootm_low" is defined, but "bootm_size" is not. Instead, it broke the case where neither "bootm_low" nor "bootm_size" is defined. Fix this function again. Fixes: 9c11135ce053 ("image: fix getenv_bootm_size() function") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Matthias Weisser <m.weisser.m@gmail.com> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* | malloc: solve dead code issue in memalign()Stephen Warren2016-02-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent change to memalign() caused the allocation failure detection code to be dead code; the "retry" logic is always activated under the same condition that the original failure detection code is, and also fully handles any possible failures. This patch solves the presence of dead code. Two alternatives are possible: a) Delete the now-dead test, and rely on the "retry" path to handle any allocation problems, as it does. b) Make the "retry" path fall through to the existing (currently dead) failure detection code, thus making it not-dead. (b) was chosen since it reduces the diff between U-Boot's and the upstream dlmalloc. This should make it marginally easier to import a new version of dlmalloc in the future. Reported by: Coverity Scan Fixes: 4f144a416469 ("malloc: work around some memalign fragmentation issues") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | common/memsize.c: Simplify RAM size detectionEddy Petrișor2016-02-08-26/+21
| | | | | | | | | | | | | | | | The case of memory of size 0 is not that different from a memory of any other size, so we remove the duplicate code and treat the small differences when it is the case. Signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>
* | hush: Add rudimentary support for PS1 and PS2Marek Vasut2016-02-08-0/+10
| | | | | | | | | | | | | | | | | | | | Add trivial support for changing the U-Boot command prompt string by setting PS1 and PS2 environment variables. Only static variables are supported. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* | hush: Pull out U-Boot prompt display and read functionalityMarek Vasut2016-02-08-5/+16
| | | | | | | | | | | | | | | | | | Pull the code which displays U-Boot prompt and reads the command line into a separate function. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* | tools: env validate: pass values as 0-based arrayAndreas Fenkart2016-02-08-7/+7
| | | | | | | | | | | | passing argv/argc can produce off-by-one errors Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
* | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2016-02-08-3/+3
|\ \
| * | Use correct spelling of "U-Boot"Bin Meng2016-02-06-3/+3
| |/ | | | | | | | | | | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* | autoboot.c: Fill env vars in process_fdt_options() only if TEXT_BASE is setStefan Roese2016-02-05-2/+2
|/ | | | | | | | | | | | | | | | The x86 build target "efi-x86" has no TEXT_BASE configured. And with the introduction of CONFIG_BOOTDELAY for x86, this function is now called for this board as well. Resulting in compile errors for this target. Without TEXT_BASE it makes no sense to fill these values. So lets only configure the env variable if TEXT_BASE is defined. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* malloc: work around some memalign fragmentation issuesStephen Warren2016-02-01-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use of memalign can trigger fragmentation issues such as: // Internally, this needs to find a free block quite bit larger than s. // Once the free region is found, any unaligned "padding" immediately // before and after the block is marked free, so that the allocation // takes only s bytes (plus malloc header overhead). p = memalign(a, s); // If there's little fragmentation so far, this allocation is likely // located immediately after p. p2 = malloc(x); free(p); // In theory, this should return the same value for p. However, the hole // left by the free() call is only s in size (plus malloc header overhead) // whereas memalign searches for a larger block in order to guarantee it // can adjust the returned pointer to the alignment requirements. Hence, // the pointer returned, if any, won't be p. If there's little or no space // left after p2, this allocation will fail. p = memalign(a, s); In practice, this issue occurs when running the "dfu" command repeatedly on NVIDIA Tegra boards, since DFU allocates a large 32M data buffer, and then initializes the USB controller. If this is the first time USB has been used in the U-Boot session, this causes a probe of the USB driver, which causes various allocations, including a strdup() of a GPIO name when requesting the VBUS GPIO. When DFU is torn down, the USB driver is left probed, and hence its memory is left allocated. If "dfu" is executed again, allocation of the 32M data buffer fails as described above. In practice, there is a memory hole exactly large enough to hold the 32M data buffer than DFU needs. However, memalign() can't know that in a general way. Given that, it's particularly annoying that the allocation fails! The issue is that memalign() tries to allocate something larger to guarantee the ability to align the returned pointer. This patch modifies memalign() so that if the "general case" over-sized allocation fails, another allocation is attempted, of the exact size the user desired. If that allocation just happens to be aligned in the way the user wants, (and in the case described above, it will be, since the free memory region is located where a previous identical allocation was located), the pointer can be returned. This patch is somewhat related to 806bd245b1ab "dfu: don't keep freeing/reallocating". That patch worked around the issue by removing repeated free/memalign within a single execution of "dfu". However, the same technique can't be applied across multiple invocations, since there's no reason to keep the DFU buffer allocated while DFU isn't running. This patch addresses the root-cause a bit more directly. This problem highlights some of the disadvantages of dynamic allocation and deferred probing of devices. This patch isn't checkpatch-clean, since it conforms to the existing coding style in dlmalloc.c, which is different to the rest of U-Boot. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-0/+29
|\
| * dm: env_sf: fix saveenv() to use driver modelGong Qianyu2016-01-27-0/+29
| | | | | | | | | | | | | | | | | | | | It might be missed when converting spi_flash_probe() in cmd_sf.c. This patch refers to commit fbb099183e3a ("dm: Convert spi_flash_probe() and 'sf probe' to use driver model"). Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2016-01-26-1/+15
|\ \
generated by cgit v1.1 at 2024-11-09 14:07:29 +0000