summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* * Add support for RMU boardwdenk2003-06-05-0/+28
| | | | | | | | * Add support for TQM862L at 100/50 MHz * Patch by Pantelis Antoniou, 02 Jun 2003: major reconstruction of networking code; add "ping" support (outgoing only!)
* * Patches by Udi Finkelstein, 2 June 2003:wdenk2003-06-03-2/+2
| | | | | | | | | | | | | | | | | | | | | | - Added support for custom keyboards, initialized by defining a board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD . - Added support for the RBC823 board. - cpu/mpc8xx/lcd.c now automatically calculates the Horizontal Pixel Count field. * Fix alignment problem in BOOTP (dhcp_leasetime option) [pointed out by Nicolas Lacressonnière, 2 Jun 2003] * Patch by Mark Rakes, 14 May 2003: add support for Intel e1000 gig cards. * Patch by Nye Liu, 3 Jun 2003: fix critical typo in MAMR definition (include/mpc8xx.h) * Fix requirement to align U-Boot image on 16 kB boundaries on PPC. * Patch by Klaus Heydeck, 2 Jun 2003 Minor changes for KUP4K configuration
* * Patch by Marc Singer, 29 May 2003:wdenk2003-05-31-294/+461
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
* * Fix data abort exception handling for arm920t CPUwdenk2003-05-28-7/+10
| | | | | | | | | | | | * Fix alignment problems with flash driver for TRAB board * Patch by Donald White, 21 May 2003: fix calculation of base address in pci_hose_config_device() * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always execute "cmd2", even if "cmd1" fails. Note that this is different to "run var1 var2" where the contents of "var2" will NOT be executed when a command in "var1" fails.
* Add zero-copy ramdisk support (requires corresponding kernel support!)wdenk2003-05-23-0/+8
|
* PPC405EP support added.stroese2003-05-23-3/+3
|
* * Patch by Dave Ellis, 22 May 2003:wdenk2003-05-22-18/+18
| | | | | | | | Fix problem with only partially cleared .bss segment * Patch by Rune Torgersen, 12 May 2003: get PCI to work on a MPC8266ADS board; incorporate change to cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
* Add support for arbitrary bitmaps for TRAB's VFD command;wdenk2003-05-21-7/+19
| | | | | allow to pass boot bitmap addresses in environment variables; allow for zero boot delay
* * Add support for arbitrary bitmaps for TRAB's VFD commandwdenk2003-05-20-17/+20
| | | | | * Patch by Christian Geißinger, 19 May 2002: On TRAB: wait until the dummy byte has been completely sent
* * Patch by David Updegraff, 22 Apr 2003:wdenk2003-05-20-0/+112
| | | | | | | | | | | | | update for CrayL1 board * Patch by Pantelis Antoniou, 21 Apr 2003: add boot support for ARTOS (a proprietary OS) * Patch by Steven Scholz, 11 Apr 2003: Add support for RTC DS1338 * Patch by Rod Boyce, 24 Jan 2003: Fix counting of extended partitions in diskboot command
* Patch by Christophe Lindheimer, 20 May 2003:wdenk2003-05-20-1/+4
| | | | allow the use of CFG_LOADS when CFG_NO_FLASH is set
* Add support for CompactFlash on ATC boardwdenk2003-05-18-6/+49
| | | | | (includes support for Intel 82365 and compatible PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers)
* * Add support for Promess ATC boardwdenk2003-05-03-1/+1
| | | | | | | | | | | | | | * Patch by Keith Outwater, 28 Apr 2003: - Miscellaneous corrections and additions to GEN860T board specific code. - Added GEN860_SC variant to GEN860T. - Miscellaneous corrections to GEN860T documentation. - Correct duplicate entry in U-Boot CREDITS file. - Add GEN860T_SC entry in MAINTAINERS file. - Update CREDITS file with GEN860T_SC info. * Update Smiths Aerospace addresses in MAINTAINERS file * Fix error handling in hush's version of "run" command
* * LWMON extensions:wdenk2003-04-27-3/+6
| | | | | | | | | | | - Splashscreen support - modem support - sysmon support - temperature dependend enabling of LCD * Allow booting from old "PPCBoot" disk partitions * Add support for TQM8255 Board / MPC8255 CPU
* Add files needed for bitmap load supportwdenk2003-04-20-0/+118
|
* * Make sure Block Lock Bits get cleared in R360MPI flash driverwdenk2003-04-20-3/+46
| | | | | | | | | | | | | | * MPC823 LCD driver: Fill color map backwards, to allow for steady display when Linux takes over * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS (this time for real). * Add support for "bmp info" and "bmp display" commands to load bitmap images; this can be used (for example in a "preboot" command) to display a splash screen very quickly after poweron. * Add support for 133 MHz clock on INCA-IP board
* * Patch by Lutz Dennig, 10 Apr 2003:wdenk2003-04-12-2/+7
| | | | | | | | | | | | | Update for R360MPI board * Add new meaning to "autostart" environment variable: If set to "no", a standalone image passed to the "bootm" command will be copied to the load address (and eventually uncompressed), but NOT be started. This can be used to load and uncompress arbitrary data. * Set max brightness for MN11236 displays on TRAB board
* Add support for TQM862L moduleswdenk2003-04-10-2/+2
|
* Prepare for 0.3.0 releasewdenk2003-04-08-10/+7
| | | | | | * Add support for Purple Board (MIPS64 5Kc) * Add support for MIPS64 5Kc CPUs
* * Patch by Arun Dharankar, 4 Apr 2003:wdenk2003-04-05-31/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add IDMA example code (tested on 8260 only) * Add support for Purple Board (MIPS64 5Kc) * Add support for MIPS64 5Kc CPUs * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS * Patch by Denis Peter, 04 Apr 2003: - update MIP405-4 board * Patches by Denis Peter, 03 April 2003: - fix PCI IRQs on MPL boards - fix two more un-relocated pointer problems * Fix behaviour of "run" command: - print error message iv variable does not exist - terminate processing of arguments in case of error * Patches by Peter Figuli, 10 Mar 2003 - Add support for BTUART on PXA platform - Add support for WEP EP250 (PXA) board * Fix flash problems on INCA-IP; add tool to allow bruning images to flash using a BDI2000 * Implement fix for I2C Edge Conditions problem for all boards that use the bit-banging driver (common/soft_i2c.c) * Add patches by Robert Schwebel, 31 Mar 2003: - csb226 board: bring in sync with innokom/memsetup.S - csb226 board: fix MDREFR handling - misc doc fixes / extensions - innokom board: cleanup, MDREFR fix in memsetup.S, config update - add BOOT_PROGRESS to armlinux.c
* U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).stroese2003-04-04-2/+16
|
* * Patch by Martin Winistoerfer, 23 Mar 2003wdenk2003-03-31-133/+184
| | | | | | | | | - Add port to MPC555/556 microcontrollers - Add support for cmi customer board with Intel 28F128J3A, 28F320J3A or 28F640J3A flash. * Patch by Rick Bronson, 28 Mar 2003: - fix common/cmd_nand.c
* * Patch by Arun Dharankar, 24 Mar 2003:wdenk2003-03-31-9/+34
| | | | | | | | | | - add threads / scheduler example code * Add patches by Robert Schwebel, 31 Mar 2003: - add ctrl-c support for kermit download - align bdinfo output on ARM * Add CPU ID, version, and clock speed for INCA-IP
* Make compile clean, fix the usual small problems.wdenk2003-03-26-1/+1
|
* * Patch by Rick Bronson, 16 Mar 2003:wdenk2003-03-26-27/+1578
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Atmel AT91RM9200DK w/NAND * Patches by Robert Schwebel, 19 Mar 2003: - use arm-linux-gcc as default compiler for ARM - fix i2c fixup code - fix missing baudrate setting - added $loadaddr / CFG_LOAD_ADDR support to loadb - moved "ignoring trailing characters" _before_ u-boot wants to print out diagnostics messages; removes bogus characters at the end of transmission * Patch by John Zhan, 18 Mar 2003: Add support for SinoVee Microsystems SC8xx boards * Patch by Rolf Offermanns, 21 Mar 2003: ported the dnp1110 related changes from the current armboot cvs to current u-boot cvs. smc91111 does not work. problem marked in smc91111.c, grep for "FIXME". * Patch by Brian Auld, 25 Mar 2003: Add support for STM flash chips on ebony board * Add PCI support for MPC8250 Boards (PM825 module) * Patch by Stefan Roese, 25 Mar 2003:
* Add PCI support for MPC8250 Boards (PM825 module)wdenk2003-03-25-2/+31
|
* * Avoid flicker on the TRAB's VFD by synchronizing the enable withwdenk2003-03-14-21/+58
| | | | | | | | | | | | | | | | | | | the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 boards, version 153 for Rev. 200 boards). * Patch by Vladimir Gurevich, 12 Mar 2003: Fix relocation problem of statically initialized string pointers in common/cmd_pci.c * Patch by Kai-Uwe Blöm, 12 Mar 2003: Cleanup & bug fixes for JFFS2 code: - the memory mangement was broken. It caused havoc on malloc by writing beyond the block boundaries. - the length calculation for files was wrong, sometimes resulting in short file reads. - data copying now optionally takes fragment version numbers into account, to avoid copying from older data. See doc/README.JFFS2 for details.
* * Patch by Josef Wagner, 12 Mar 2003:wdenk2003-03-12-6/+2
| | | | | | | | | | | | | | | | | | | | | | - 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
* * Patches by David Müller, 31 Jan 2003:wdenk2003-03-06-1/+1
| | | | | | | | | | | | | | | | | - minimal setup for CardBus bridges - add EEPROM read/write support in the CS8900 driver - add support for the builtin I2C controller in the Samsung s3c24x0 chips - add support for MPL's VCMA9 (Samsung s3c2410 based) board * Patch by Steven Scholz, 04 Feb 2003: add support for RTC DS1307 * Patch by Reinhard Meyer, 5 Feb 2003: fix PLPRCR/SCCR init sequence on 8xx to allow for changes of EBDF by software * Patch by Vladimir Gurevich, 07 Feb 2003: "API-compatibility patch" for 4xx I2C driver
* Fix problem with default #defineswdenk2003-03-06-1/+3
| | | | Cleanup compiler warning
* * Patches by Robert Schwebel, 06 Mar 2003:wdenk2003-03-06-8/+37
| | | | | | | | | | | - fix bug in BOOTP code (must use NetCopyIP) - update of CSB226 port - clear BSS segment on XScale - added support for i2c_init_board() function - update to the Innokom plattform * Extend support for redundand environments for configurations where environment size < sector size
* * Patch by Robert Schwebel, 21 Jan 2003:wdenk2003-03-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add support for Innokom board - Don't complain if "install" fails - README cleanup (remove duplicated lines) - Update PXA header files * Add documentation for existing POST code (doc/README.POST) * Patch by Laudney Ren, 15 Jan 2003: Fix handling of redundand environment in "tools/envcrc.c" * Patch by Detlev Zundel, 28 Feb 2003: Add bedbug support for 824x systems * Add support for 16 MB flash configuration of TRAB board * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM
* * Add support for 16 MB flash configuration of TRAB boardwdenk2003-02-28-1/+18
| | | | | | | | | | | | | | | | | * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM * Start adding MIPS support files
* Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY).stroese2003-02-14-0/+6
|
* * Add dual ethernet support on PM826wdenk2003-01-17-1/+1
| | | | | | | | | | * Add support for LXT971 PHY on PM826 * Patch by Tord Andersson, 16 Jan 2003: Fix flash sector count for TQM8xxL * Fix I2C EEPROM problem on ICU862 board (would only write the first 16 bytes out of each 32 byte block)
* * Restrict baudrate settings on LWMON to higher speedswdenk2003-01-11-20/+40
| | | | | | | | | | | | when watchdog is on * Update baudrate in bd_info when it gets changed * Add watchdog trigger points while waiting for serial port (so far only 8xx -- needed on LWMON with 100ms watchdog) * Improve command line tool to access the U-Boot's environment (figuration of the utility, using a config file)
* Patch by Detlev Zundel, 30 Dec 2002:wdenk2003-01-02-4/+27
| | | | Add single quote support for (old) command line parser
* * Use 1-byte-read instead of -write for iprobe() functionwdenk2002-12-17-1/+3
| | | | | | Add i2c commands to PM826 config * extend I2C POST code: check for list on known addresses
* * Improve log buffer code; use "loglevel" to decide which messageswdenk2002-12-08-64/+90
| | | | to log on the console, too (like in Linux); get rid of "logstart"
* * Patch by Hans-Joerg Frieden, 06 Dec 2002wdenk2002-12-07-18/+101
| | | | | | | | | | | | | | | | | | | Fix misc problems with AmigaOne support * Patch by Chris Hallinan, 3 Dec 2002: minor cleanup to the MPC8245 EPIC driver * Patch by Pierre Aubert , 28 Nov 2002 Add support for external (SIU) interrupts on MPC8xx * Patch by Pierre Aubert , 28 Nov 2002 Fix nested syscalls bug in standalone applications * Patch by David Müller, 27 Nov 2002: fix output of "pciinfo" command for CardBus bridge devices. * Fix bug in TQM8260 board detection - boards got stuck when board ID was not readable
* Add LED indication for IDE activity on KUP4K boardwdenk2002-12-04-224/+192
|
* * Fix startup problems with VFD display on TRABwdenk2002-12-03-9/+10
| | | | | | * Patch by Pierre Aubert, 20 Nov 2002 Add driver for Epson SED13806 graphic controller. Add support for BMP logos in cfb_console driver.
* * Added support for both PCMCIA slots (at the same time!) on MPC8xxwdenk2002-11-21-57/+76
| | | | | | | | | * Patch by Rod Boyce, 21 Nov 2002: fix PCMCIA on MBX8xx board * Patch by Pierre Aubert , 21 Nov 2002 Add CFG_CPM_POST_WORD_ADDR to make the offset of the bootmode word in DPRAM configurable
* * Patch by Thomas Frieden, 13 Nov 2002:wdenk2002-11-19-14/+336
| | | | | | | | | | | | | Add code for AmigaOne board (preliminary merge to U-Boot, still WIP) * Patch by Jon Diekema, 12 Nov 2002: - Adding URL for IEEE OUI lookup - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED being defined. - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and root-on-nfs macros are designed to switch how the default boot method gets defined.
* * Patch by Daniel Engström, 13 Nov 2002:wdenk2002-11-18-72/+382
| | | | | | | Add support for i386 architecture and AMD SC520 board * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk
* * Patch by Andreas Oberritter, 09 Nov 2002:wdenk2002-11-11-25/+45
| | | | | | | | | | | | | | | | Change behaviour of NetLoop(): return -1 for errors, filesize otherwise; return code 0 is valid an means no file loaded - in this case the environment still gets updated! * Patches by Jon Diekema, 9 Nov 2002: - improve ADC/DAC clocking on the SACSng board to align the failing edges of LRCLK and SCLK - sbc8260 configuration tweaks - add status LED support for 82xx systems - wire sspi/sspo commands into command handler; improved error handlering - add timestamp support and alternate memory test to the SACSng configuration
* * Vince Husovsky, 7 Nov 2002:wdenk2002-11-10-22/+231
| | | | | | | | | | | | | | | | | | | | | Add "-n" to linker options to get rid of "Not enough room for program headers" problem * Patch by David Müller, 05 Nov 2002 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ so we can use an already existing name * Patch by Pierre Aubert, 05 Nov 2002 Hardware related improvements in FDC boot code * Patch by Holger Schurig, 5 Nov 2002: Make the PXA really change it's frequency * Patch by Pierre Aubert, 05 Nov 2002 Add support for slave serial Spartan 2 FPGAs * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet drivers
* Quick & Dirty fix for log buffer problem when environment is not setwdenk2002-11-05-3/+6
| | | | | | Trigger watchdog when reading the env - this might take a while. Set debugging baud rate for KUP4K board
* * Add support for log buffer which can be passed to Linux kernel'swdenk2002-11-05-16/+469
| | | | | | | syslog mechanism; used especially for POST results. * Patch by Klaus Heydeck, 31 Oct 2002: Add initial support for kup4k board
* Patch by Guillaume Alexandre,, 04 Nov 2002:wdenk2002-11-04-1/+1
| | | | | | | | Improve PCI access on 32-bits Compact PCI bus Adjust VFD initialization on TRAB Cleanup RRvision video code
generated by cgit v1.1 at 2024-12-15 06:09:46 +0000