summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass2015-09-11-0/+9
| | | | | | | Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* Move malloc_cache_aligned() to its own headerSimon Glass2015-09-11-1/+1
| | | | | | | | | | | | | | | | | | | At present malloc.h is included everywhere since it recently was added to common.h in this commit: 4519668 mtd/nand/ubi: assortment of alignment fixes This seems wasteful and unnecessary. We have been trying to trim down common.h and put separate functions into separate header files and that change goes in the opposite direction. Move malloc_cache_aligned() to a new header so that this can be avoided. The header would perhaps be better named as alignmem.h but it needs to be included after common.h and people might be confused by this. With the name memalign.h it fits nicely after malloc() in most cases. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* dfu: command: Extend "dfu" command to handle receiving data via TFTPLukasz Majewski2015-09-07-0/+20
| | | | | | | | The "dfu" command has been extended to support transfers via TFTP protocol. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* update: tftp: dfu: Extend update_tftp() function to support DFULukasz Majewski2015-09-07-12/+40
| | | | | | | | | | | | | | | This code allows using DFU defined mediums for storing data received via TFTP protocol. It reuses and preserves functionality of legacy code at common/update.c. The update_tftp() function now accepts parameters - namely medium device name and its number (e.g. mmc 1). Without this information passed old behavior is preserved. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* tftp: update: Allow some parts of the code to be reused when ↵Lukasz Majewski2015-09-07-8/+7
| | | | | | | | | | | | CONFIG_SYS_NO_FLASH is set Up till now it was impossible to use code from update.c when system was not equipped with raw FLASH memory. Such behavior prevented DFU from reusing this code. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* rockchip: Add support for the SPI imageSimon Glass2015-09-02-0/+1
| | | | | | | | | | | | The Rockchip boot ROM requires a particular file format for booting from SPI. It consists of a 512-byte header encoded with RC4, some padding and then up to 32KB of executable code in 2KB blocks, separated by 2KB empty blocks. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. This allows booting from SPI flash on supported machines. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Add support for the SD imageSimon Glass2015-09-02-0/+1
| | | | | | | | | | | The Rockchip boot ROM requires a particular file format. It consists of 64KB of zeroes, a 512-byte header encoded with RC4, and then some executable code. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Add the rkimage format to mkimageSimon Glass2015-09-02-0/+1
| | | | | | | | Rockchip SoCs require certain formats for code that they execute, The simplest format is a 4-byte header at the start of a binary file. Add support for this so that we can create images that the boot ROM understands. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2015-08-31-22/+698
|\
| * dm: tpm: Add a 'tpmtest' commandSimon Glass2015-08-31-0/+575
| | | | | | | | | | | | | | | | | | | | These tests come from Chrome OS code. They are not particularly tidy but can be useful for checking that the TPM is behaving correctly. Some knowledge of TPM operation is required to use these. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Add a 'tpm info' commandSimon Glass2015-08-31-0/+26
| | | | | | | | | | | | | | | | | | Add a command to display basic information about a TPM such as the model and open/close state. This can be useful for debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Check that parse_byte_string() has data to parseSimon Glass2015-08-31-0/+2
| | | | | | | | | | | | | | | | | | Rather then crashing when there is no data, print an error. The error is printed by the caller to parse_byte_string(). Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Report tpm errors on the command lineSimon Glass2015-08-31-22/+24
| | | | | | | | | | | | | | | | | | | | | | When a 'tpm' command fails, we set the return code but give no indication of failure. This can be confusing. Add an error message when any tpm command fails. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * dm: i2c: Add a command to adjust the offset lengthSimon Glass2015-08-31-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C chips can support a register offset, with registers accessible by sending this offset as the first part of any read or write transaction. Most I2C chips have a single byte offset, thus the offset length is 1. This provides access for up 256 registers. However other offset lengths are supported, including 0. Add a command to provide access to the offset length from the command line. This allows the offset length to be read or written. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * dm: tpm: Convert the TPM command and library to driver modelSimon Glass2015-08-31-0/+26
| | | | | | | | | | | | | | | | | | Add driver model support to the TPM command and the TPM library. Both support only a single TPM at present. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * tpm: Add Kconfig options for TPMsSimon Glass2015-08-31-0/+12
| | | | | | | | | | | | | | | | | | Add new Kconfig options for TPMs in preparation for moving boards to use Kconfig for TPM configuration. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2015-08-30-1/+4
|\ \ | |/ |/|
| * common/lcd_simplefb: Add support for 32bit organized framebuffersHannes Petermaier2015-07-23-1/+4
| | | | | | | | Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* | mtd/nand/ubi: assortment of alignment fixesMarcel Ziswiler2015-08-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer alignment into account which led to failures of the following form: ERROR: v7_dcache_inval_range - start address is not aligned - 0x1f7f0108 ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1f7f1108 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Scott Wood <scottwood@freescale.com> [trini: Add __UBOOT__ hunk to lib/zlib/zutil.c due to malloc.h in common.h] Signed-off-by: Tom Rini <trini@konsulko.com>
* | env_mmc: Properly prefix mmc errors with '!'Hans de Goede2015-08-28-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The set_default_env() function from env_common.c expects either a fully formatted error msg, e.g.: "## Resetting to default environment\n" or an error msg prefixed with an !, in which case it will format it. Fix the init_mmc_for_env() error messages to be prefixed with a ! this changes the bootup-log on sunxi when no mmc card is found from: MMC: SUNXI SD/MMC: 0 No MMC card foundIn: serial Out: serial To: MMC: SUNXI SD/MMC: 0 *** Warning - No MMC card found, using default environment In: serial Out: serial Which clearly is how things should look. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | malloc_simple: Correct the alignment logic in memalign_simple()Simon Glass2015-08-28-1/+1
| | | | | | | | | | | | | | | | This should use the align parameter, not bytes. Natural alignment is one use case but should not be the only one supported by this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | NDS32: Generic Board Support and UnsupportKun-Hua Huang2015-08-28-4/+10
| | | | | | | | | | | | Add nds32 ag101p generic board support. Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
* | image: Fix loop condition to avoid warningThierry Reding2015-08-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 5.1 starts warning for comparisons such as !a > 0, assuming that the negation was meant to apply to the whole expression rather than just the left operand. Indeed the comparison in the FIT loadable code is confusingly written, though it does end up doing the right thing. Rewrite the condition to be more explicit, that is, iterate over strings until they're exhausted. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | x86: fsp: Delay x86_fsp_init() call a little bitBin Meng2015-08-26-3/+3
| | | | | | | | | | | | | | | | Move x86_fsp_init() call after initf_malloc() so that we can fix up the gd->malloc_limit later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* | of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROLMasahiro Yamada2015-08-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-08-18-8/+9
|\ \
| * | env: use cache line aligned memory for flash readRavi Babu2015-08-17-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers. This is required because, flash drivers may use DMA for read operations and may have to invalidate the buffer before read. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Tested-by: Jagan Teki <jteki@openedev.com>
| * | sf: allocate cache aligned buffers to copy from flashRavi Babu2015-08-17-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers. This is required because, flash drivers may use DMA for read operations and may have to invalidate the buffer before read. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Tested-by: Jagan Teki <jteki@openedev.com>
* | | Revert "Align global_data to a 16-byte boundary"Simon Glass2015-08-17-1/+0
|/ / | | | | | | | | | | | | | | | | | | This causes widespread breakage due to the operation of the low-level code in crt0.S and cro0_64.S for ARM at least. The fix is not complicated but it seems safer to revert this for now. This reverts commit 2afddae07523f23f77acd066ad1719f53d289f98. Signed-off-by: Simon Glass <sjg@chromium.org>
* | x86: Switch to using generic global_data setupSimon Glass2015-08-14-1/+2
| | | | | | | | | | | | | | | | | | | | | | There is quite a bit of assembler code that can be removed if we use the generic global_data setup. Less arch-specific code makes it easier to add new features and maintain the start-up code. Drop the unneeded code and adjust the hooks in board_f.c to cope. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Allow arch-specific setting of global_data in board_init_f_mem()Simon Glass2015-08-14-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | At present we have a simple assignment to gd. With some archs this is implemented as a register or through some other means; a simple assignment does not suit in all cases. Change this to a function and add documentation to describe how this all works. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Align global_data to a 16-byte boundarySimon Glass2015-08-14-0/+1
| | | | | | | | | | | | | | | | Some archs like to have larger alignment for their global data. Use 16 bytes which suits all current archs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | common: Display >=4GiB memory bank sizeBin Meng2015-08-14-1/+2
| | | | | | | | | | | | | | | | bd->bi_dram[] has both start address and size defined as 32-bit, which is not the case on some platforms where >=4GiB memory bank is used. Change them to support such memory banks. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | image-fdt.c: store returned error valueMax Krummenacher2015-08-13-1/+2
| | | | | | | | | | | | | | | | | | | | | | This fixes the following warning (and the runtime error reporting): ../common/image-fdt.c:491:4: warning: 'fdt_ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
* | generic-board: allow showing custom board infoMarcel Ziswiler2015-08-13-1/+1
| | | | | | | | | | | | | | | | | | | | Allow showing custom board info from a checkboard() function being implemented if CONFIG_CUSTOM_BOARDINFO is specified. Previously the device tree model was always displayed not taking any CONFIG_CUSTOM_BOARDINFO into account. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | common/lcd_console: fix console/logo regressionMarcel Ziswiler2015-08-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit changed the order of the column vs. row parameter to the lcd_init_console() function but missed actually changing it as well the second time it is called from lcd_clear() which resulted in a garbled text console which this patch fixes. commit 604c7d4a5a3cf70949f6e6094bf0d52ee3b4804d common/lcd_console: introduce display/framebuffer rotation Tested on Colibri T20 with my latest assortment of tegra fixes/enhancements patch set. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
* | kconfig: add config option for shell promptNikita Kiryanov2015-08-13-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
* | common/cmd_source.c: Fix the source command failure under 64-bit platformGong Qianyu2015-08-12-3/+3
| | | | | | | | | | | | | | | | | | | | | | Modify the data pointer type from ulong* to u32*. For arm64 type "ulong" could be 64-bit. Then in line 89 of common/cmd_source.c: "while (*data++);" data will point to the next 64 bits each time. As the uImage file generated by mkimage tool keeps the same data format in either 32-bit or 64-bit platform, the difference would cause failure in 64-bit platform. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
* | spl: Fix compile warning for arm64Gong Qianyu2015-08-12-1/+1
| | | | | | | | | | | | Make the cast explicit for "warning: cast to pointer from integer of different size". Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
* | image: fix Android ramdisk support when dtb is specifiedRob Herring2015-08-12-10/+8
| | | | | | | | | | | | | | | | | | If a dtb is specified on the command-line, the Android boot image ramdisk will not be found. Fix this so that we can specify the ramdisk address and dtb address. The syntax is to enter the Android boot image address for both the kernel and ramdisk. Signed-off-by: Rob Herring <robh@kernel.org>
* | spl, common, serial: build SPL without serial supportHeiko Schocher2015-08-12-4/+12
| | | | | | | | | | | | | | | | | | This patch enables building SPL without CONFIG_SPL_SERIAL_SUPPORT support. Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Ensure we build arch/arm/imx-common on mx28] Signed-off-by: Tom Rini <trini@konsulko.com>
* | dm: pmic: Display the regulator limits on errorSimon Glass2015-08-05-1/+2
| | | | | | | | | | | | | | | | When a regulator command cannot honour the requested voltage, display the limits to try to be helpful. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* | dm: usb: fix USB Ethernet without CONFIG_DM_ETH regressionMarcel Ziswiler2015-08-05-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit enforces CONFIG_DM_ETH for USB Ethernet which breaks any board using CONFIG_USB_HOST_ETHER without CONFIG_DM_ETH which this patch fixes. commit 69559093f6173dcfcb041df0995063bdbd07d49b dm: usb: Avoid using USB ethernet with CONFIG_DM_USB and no DM_ETH Tested on Colibri T20/T30 as well as Apalis T30 with CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX enabled and a LevelOne USB-0301 ASIX AX88772 dongle. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-x86Tom Rini2015-08-05-5/+272
|\ \
| * | efi: Add a command to display the memory mapSimon Glass2015-08-05-0/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The EFI memory map is passed from the stub to U-Boot in a table. Add a command to display it in a vaguely readable fashion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested on QEMU Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * | Add a way to skip relocationSimon Glass2015-08-05-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running U-Boot as an EFI application we cannot relocate since we do not have relocation information. U-Boot has already been relocated to a suitable address. Add a global_data flag to control skipping relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | efi: Avoid using non-existent text baseBen Stoltz2015-08-05-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When U-Boot runs as an EFI application is does not have a definition of CONFIG_SYS_TEXT_BASE. U-Boot is a relocatable application and the relocation is done by EFI. U-Boot can be loaded at any address. This is similar to how sandbox works. Adjust the early board init to deal with this. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | common: command add '\n' for debug msgPeng Fan2015-08-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add '\n' for debug msg. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * | common: Print nothing in the __weak checkboard()Bin Meng2015-08-05-1/+0
| | | | | | | | | | | | | | | | | | | | | Do not print confusing "Board: Unknown" during boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-12-12 22:32:18 +0000