summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
...
* bootm: relocate ramdisk if CONFIG_SYS_BOOT_RAMDISK_HIGH setRick Altherr2017-01-20-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | In 35fc84f, bootm was refactored so plain 'bootm' and 'bootm <subcommand>' shared a common implementation. The 'bootm ramdisk' command implementation is now part of the common implementation but not invoke by plain 'bootm' since the original implementation never did ramdisk relocation. Instead, ramdisk relocation happened in image_setup_linux() which is typically called during the OS portion of 'bootm'. On ARM, parameters to the Linux kernel can either be passed by FDT or ATAGS. When using FDT, image_setup_linux() is called which also triggers ramdisk relocation. When using ATAGS, image_setup_linux() is _not_ called because it mostly does FDT setup. Instead of calling image_setup_linux() in both FDT and ATAGS cases, include BOOTM_STATE_RAMDISK in the requested states during a plain 'bootm' if CONFIG_SYS_BOOT_RAMDISK_HIGH is set and remove the ramdisk relocation from image_setup_linux(). This causes ramdisk relocation to happen on any system where CONFIG_SYS_BOOT_RAMDISK_HIGH regardless of the OS being booted. Also remove IMAGE_ENABLE_RAMDISK_HIGH as it was only used by the now-removed code from image_setup_linux(). Signed-off-by: Rick Altherr <raltherr@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2017-01-17-4/+4
|\
| * usb: storage: Show number of storage devices detected for DM_USBMichal Simek2017-01-17-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | By enabling DM_USB information about number of storage devices was lost. Get this information back simply by printing number of devices detected via BLK uclass. For example: scanning bus 0 for devices... 7 USB Device(s) found scanning usb for storage devices... 3 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2017-01-16-9/+128
|\ \ | |/ |/|
| * splash: fix splash source flags checktomas.melin@vaisala.com2017-01-13-2/+2
| | | | | | | | | | | | | | | | | | SPLASH_STORAGE_RAW is defined as 0, so a check against & will never be true. These flags are never combined so do a check against == instead. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * splash: add support for loading splash from a FIT imagetomas.melin@vaisala.com2017-01-13-1/+119
| | | | | | | | | | | | | | | | | | Enable support for loading a splash image from within a FIT image. The image is assumed to be generated with mkimage -E flag to hold the data external to the FIT. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * splash: sort include filestomas.melin@vaisala.com2017-01-13-6/+7
| | | | | | | | | | | | Sort include files in accordance to U-Boot coding style. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
* | armv8: release slave cores from CPU_RELEASE_ADDROded Gabbay2017-01-14-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using ARMv8 with ARMV8_SPIN_TABLE=y, we want the slave cores to wait on spin_table_cpu_release_addr, until the Linux kernel will "wake" them by writing to that location. The address of spin_table_cpu_release_addr is transferred to the kernel using the device tree that is updated by spin_table_update_dt(). However, if we also use SPL, then the slave cores are stuck at CPU_RELEASE_ADDR instead and as a result, never wake up. This patch releases the slave cores by writing spl_image->entry_point to CPU_RELEASE_ADDR location before the end of the SPL code (at jump_to_image_no_args()). That way, the slave cores will start to execute the u-boot and will get to the spin-table code and wait on the correct address (spin_table_cpu_release_addr). Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* | spl: move RAM boot support in separate fileStefan Agner2017-01-14-60/+84
| | | | | | | | | | | | | | | | Add a new top-level config option so support booting an image stored in RAM. This allows to move the RAM boot support into a sparate file and having a single condition to compile that file. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | Convert CONFIG_SPL_RAM_DEVICE to defconfigStefan Agner2017-01-14-0/+9
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_RAM_DEVICE Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* | Kconfig: CONFIG_OF_PLATDATA doesn't really existTom Rini2017-01-14-1/+1
| | | | | | | | | | | | | | There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge git://git.denx.de/u-boot-dmTom Rini2017-01-10-0/+2
|\ \
| * | scsi: dm: Unbind all scsi based block devices before new scanMichal Simek2017-01-09-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New scan should unbind all block devices not to be listed again. Without this patch if scsi reset or scan is called new block devices are created which point to the same id and lun. For example: ZynqMP> scsi scan scsi_scan: if_type=2, devnum=0: sdhci@ff170000.blk, 6, 0 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 0 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 1 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 2 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 3 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 4 scanning bus for devices... Device 0: (1:0) Vendor: ATA Prod.: KINGSTON SVP200S Rev: 501A Type: Hard Disk Capacity: 57241.8 MB = 55.9 GB (117231408 x 512) Reported-by: Ken Ma <make@marvell.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
* | SPL: make struct spl_image 64-bit safeAndre Przywara2017-01-04-5/+5
|/ | | | | | | | | | | | | | Since entry_point and load_addr are addresses, they should be represented as longs to cover the whole address space and to avoid warning when compiling the SPL in 64-bit. Also adjust debug prints to add the 'l' specifier, where needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* tools: mkimage: add firmware-ivt image type for HAB verificationSven Ebenfeld2017-01-02-0/+6
| | | | | | | | | | | | | | | | | | When we want to use Secure Boot with HAB from SPL over U-Boot.img, we need to append the IVT to the image and leave space for the CSF. Images generated as firmware_ivt can directly be signed using the Freescale code signing tool. For creation of a CSF, mkimage outputs the correct HAB Blocks for the image. The changes to the usual firmware image class are quite small, that is why I implemented that directly into the default_image. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
* common: Fix logic in fpga programmingMichal Simek2016-12-20-4/+3
| | | | | | | | | Stop boot process if fpga programming fails. Without this patch boot process continues even if fpga programming failed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: Add support for scsi/sata based devicesMichal Simek2016-12-20-2/+78
| | | | | | | | | | | | | | | | | | | | | | | | All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* common: miiphyutil: Add helper function for mdio bus nameMichal Simek2016-12-20-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | The most of ethernet drivers are using this mdio registration sequence. strcpy(priv->bus->name, "emac"); mdio_register(priv->bus); Where driver can be used only with one MDIO bus because only unique name should be used. Other drivers are using unique device name for MDIO registration to support multiple instances. snprintf(priv->bus->name, sizeof(bus->name), "%s", name); With DM dev->seq is used more even in logs (like random MAC address generation: printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", dev->name, dev->seq, pdata->enetaddr); ) where eth%d prefix is used. Simplify driver code to register mdio device with dev->seq number to simplify mdio registration and reduce code duplication across all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* spl: Drop announce_boot_device()Simon Glass2016-12-09-83/+3
| | | | | | This task can be handled by inline code now. Drop this function. Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: Pass the loader into spl_load_image()Simon Glass2016-12-09-4/+4
| | | | | | | Rather than have this function figure out the correct loader again, pass it in as a parameter. Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: Move the loading code into its own functionSimon Glass2016-12-09-12/+29
| | | | | | | Create a boot_from_devices() function to handle trying each device. This helps to reduce the size of the already-large board_init_r() function. Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: Add a name to the SPL load-image methodsSimon Glass2016-12-09-16/+18
| | | | | | | | | | | It is useful to name each method so that we can print out this name when using the method. Currently this happens using a separate function. In preparation for unifying this, add a name to each method. The name is only available if we have libcommon support (i.e can use printf()). Signed-off-by: Simon Glass <sjg@chromium.org>
* Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini2016-12-09-90/+2
| | | | | This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
* common: miiphyutil: Add helper function for mdio bus nameMichal Simek2016-12-08-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The most of ethernet drivers are using this mdio registration sequence. strcpy(priv->bus->name, "emac"); mdio_register(priv->bus); Where driver can be used only with one MDIO bus because only unique name should be used. Other drivers are using unique device name for MDIO registration to support multiple instances. snprintf(priv->bus->name, sizeof(bus->name), "%s", name); With DM dev->seq is used more even in logs (like random MAC address generation: printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", dev->name, dev->seq, pdata->enetaddr); ) where eth%d prefix is used. Simplify driver code to register mdio device with dev->seq number to simplify mdio registration and reduce code duplication across all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- For example: Board: Xilinx Zynq Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id Warning: ethernet@e000b000 (eth0) using random MAC address - 7a:fc:90:53:6a:41 eth0: ethernet@e000b000ZYNQ GEM: e000c000, phyaddr ffffffff, interface rgmii-id Warning: ethernet@e000c000 (eth3) using random MAC address - 1a:ff:d7:1a:a1:b2 , eth3: ethernet@e000c000 ** Bad device size - mmc 0 ** Checking if uenvcmd is set ... Hit any key to stop autoboot: 0 Zynq> mdio list eth0: 17 - Marvell 88E1111S <--> ethernet@e000b000 eth3: 17 - Marvell 88E1111S <--> ethernet@e000c000 Zynq>
* dm: Add support for scsi/sata based devicesMichal Simek2016-12-08-2/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Series-changes: 2 - Use CONFIG_DM_SCSI instead of mix of DM_SCSI and DM_SATA Ceva sata has never used sata commands that's why keep it in SCSI part only. - Separate scsi_scan() for DM_SCSI and do not change cmd/scsi.c - Extend platdata Series-changes: 3 - Fix scsi_scan return path - Fix header location uclass-internal.h - Add scsi_max_devs under !DM_SCSI - Add new header device-internal because of device_probe() - Redesign block device creation algorithm - Use device_unbind in error path - Create block device with id and lun numbers (lun was there in v2) - Cleanup dev_num initialization in block device description with fixing parameters in blk_create_devicef - Create new Kconfig menu for SATA/SCSI drivers - Extend description for DM_SCSI - Fix Kconfig dependencies - Fix kernel doc format in scsi_platdata - Fix ahci_init_one - vendor variable Series-changes: 4 - Fix Kconfig entry - Remove SPL ifdef around SCSI uclass - Clean ahci_print_info() ifdef logic
* dm: spl: mmc: Fix EXT SPL supportMichal Simek2016-12-05-2/+2
| | | | | | | | | | | | | | The patch "dm: spl: mmc: Support CONFIG_BLK in SPL MMC" (sha1: 87bce4e5c0b55452d70830928b2d7b98fa24d4e3) converted FAT part of spl_mmc_do_fs_boot() but forget to update also EXT part by 's/&mmc->block_dev/mmc_get_blk_desc(mmc)/'. This patch is fixing compilation error when CONFIG_SPL_EXT_SUPPORT is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* common: image: Remove FIT header update from image post-processingAndrew F. Davis2016-12-04-23/+6
| | | | | | | | | | | | | | | | | | | After an image is selected out of a FIT blob for further processing we run an optional, platform specific, post-processing function on this component. This post-processing may modify the position and size of the image, so after post-processing we update the location and size for this image in the FIT header. This can cause problems as the position of subsequent components in the FIT blob are only referenced by relative position to the end of the last component. When we resize or move a component the following components position will be calculated incorrectly. To fix this, we do not update the FIT header but instead only update our local understanding of the image data. This also allows us to re-run post-processing steps if needed. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Carlos Hernandez <ceh@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-dmTom Rini2016-12-03-2/+5
|\
| * libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORYMasahiro Yamada2016-12-02-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e2f88dfd2d96 ("libfdt: Introduce new ARCH_FIXUP_FDT option") allows us to skip memory setup of DTB, but a problem for ARM is that spin_table_update_dt() and psci_update_dt() are skipped as well if CONFIG_ARCH_FIXUP_FDT is disabled. This commit allows us to skip only fdt_fixup_memory_banks() instead of the whole of arch_fixup_fdt(). It will be useful when we want to use a memory node from a kernel DTB as is, but need some fixups for Spin-Table/PSCI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build error for x86: Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: core: Handle global_data moving in SPLSimon Glass2016-12-02-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_SPL_STACK_R is enabled, and spl_init() is called before board_init_r(), spl_relocate_stack_gd() will move global_data to a new place in memory. This affects driver model since it uses a list for the uclasses. Unless this is updated the list will become invalid. When looking for a non-existent uclass, such as when adding a new one, the loop in uclass_find() may continue forever, thus causing a hang. Add a function to correct this rather obscure bug. Signed-off-by: Simon Glass <sjg@chromium.org>
* | cmd: Convert CMD_BOOTMENUTom Rini2016-12-03-0/+6
| | | | | | | | | | | | Also convert MENU while we're in here. Signed-off-by: Tom Rini <trini@konsulko.com>
* | image: Add Trusted Execution Environment image typeAndrew F. Davis2016-12-03-0/+1
| | | | | | | | | | | | | | | | Add a new image type representing Trusted Execution Environment (TEE) image types. For example, an OP-TEE OS binary image. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | image: Add FIT image loadable section custom processingAndrew F. Davis2016-12-03-0/+33
| | | | | | | | | | | | | | | | | | | | | | To help automate the loading of custom image types we add the ability to define custom handlers for the loadable section types. When we find a compatible type while loading a "loadable" image from a FIT image we run its associated handlers to perform any additional steps needed for loading this image. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | common: sh: add necessary define bits to board_fVladimir Zapolskiy2016-12-02-6/+9
| | | | | | | | | | | | | | | | | | | | Since a platform conversion to generic board support has not been accomplished some architecture specific bits are missing from board_f init sequence, the change adds a number of basic expected callbacks into early init sequence. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Separate SCSI private block description initializationMichal Simek2016-12-02-6/+22
| | | | | | | | | | | | | | | | | | | | When blk_create_device() is called some parameters in blk_desc are automatically filled. Separate SCSI private initialization and SCSI full block device initialization not to rewrite already prepared data. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Change scsi_scan() to be able to return valueMichal Simek2016-12-02-1/+2
| | | | | | | | | | | | | | | | | | | | With DM_SCSI this function will return more than one return value to cover errors. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Make private functions staticMichal Simek2016-12-02-6/+10
| | | | | | | | | | | | | | | | | | | | Several functions should be static because they are not exported to any other file. Warnings were reported by sparse C=1. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Remove completely unused functionsMichal Simek2016-12-02-35/+0
| | | | | | | | | | | | | | | | | | | | These functions are not called for any location. This patch removes them scsi_trim_trail(), scsi_get_disk_count() and scsi_setup_read6(). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Simplify scsi_read/scsi_write()Michal Simek2016-12-02-16/+11
| | | | | | | | | | | | | | | | | | | | There is no reason to directly point to static allocated array when we have proper block_dev pointer available via parameter in !CONFIG_BLK. For CONFIG_BLK this is read directly from uclass platdata. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Move pccb buffer initalization directly to scsi_detect_devMichal Simek2016-12-02-6/+6
| | | | | | | | | | | | | | | | pccb is pointer to temporary buffer which is used only for sending command. Make it local as is done in scsi_read/scsi_write. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Take lun from device block descriptionMichal Simek2016-12-02-6/+5
| | | | | | | | | | | | | | | | Prepare LUN(Logical unit number) directly in block description structure and reuse it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Extract device detection algorithmMichal Simek2016-12-02-61/+82
| | | | | | | | | | | | | | | | The patch enables running detection algorithm on block device description structure. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | scsi: Extract block device initializationMichal Simek2016-12-02-20/+25
| | | | | | | | | | | | | | Extract block device initialization to specific function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | common: miiphyutil: Work and report phy address in hex in mdio cmdMichal Simek2016-12-02-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | It is confusing that mdio commands work and report phy id as decimal value when mii is working with hex values. For example: ZynqMP> mdio list gem: 21 - TI DP83867 <--> ethernet@ff0e0000 ZynqMP> mdio read ethernet@ff0e0000 0 Reading from bus gem PHY at address 21: 0 - 0x1140 ZynqMP> mii dump 21 0 Incorrect PHY address. Range should be 0-31 ... ZynqMP> mii dump 15 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset U-Boot normally takes hex values that's why this patch is changing mdio command to handle hex instead of changing mii command to handle decimal values. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* SPL: mmc: Make spl_mmc_load_image availableMarek Vasut2016-12-01-2/+2
| | | | | | | | | | Make the spl_mmc_load_image() available globally, so it can be invoked directly by SPL on extremely space-constrained systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: Tinification of the mmc codeMarek Vasut2016-12-01-1/+5
| | | | | | | | | | | | Add new configuration option CONFIG_MMC_TINY which strips away all memory allocation within the MMC code and code for handling multiple cards. This allows extremely space-constrained SPL code use the MMC framework. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-11-30-2/+2
|\
| * common/board_f: enable initr_trap for MIPSDaniel Schwierzeck2016-11-30-2/+2
| | | | | | | | | | | | | | | | Enable initr_trap hook also for MIPS to install and enable U-Boot's specific MIPS exception handlers. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-11-30-1/+0
|\ \ | |/ |/|
| * spl: mmc: fix switch statementMax Krummenacher2016-11-29-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case statement at the end of the switch leading to a compile error. Remove the offending case statement. | common/spl/spl_mmc.c:339:7: error: label at end of compound statement Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-07-15 11:05:26 +0000