summaryrefslogtreecommitdiff
path: root/common
Commit message (Collapse)AuthorAgeLines
* bootm: Move fixup_silent_linux() earlier in the bootm stagesSimon Glass2013-07-17-4/+4
| | | | | | | | | | | | Before the bootm refactor, fixup_silent_linux() was done only in the monolithic bootm case, not in the subcommand case. With the refactor, it is done always, which is good. Unfortunately it is done too late, since it is the PREP or CMDLINE stages that set up the command line for Linux. Move fixup_silent_linux() into the LOADOS stage, which is where we find out the OS being used, and can thus decide whether to perform this step. Signed-off-by: Simon Glass <sjg@chromium.org>
* tpm: add AUTH1 cmds for LoadKey2 and GetPubKeyReinhard Pfau2013-07-16-0/+100
| | | | | | | | | | | | | | | | | | | | | | Extend the tpm library with support for single authorized (AUTH1) commands as specified in the TCG Main Specification 1.2. (The internally used helper functions are implemented in a way that they could also be used for double authorized commands if someone needs it.) Provide enums with the return codes from the TCG Main specification. For now only a single OIAP session is supported. OIAP authorized version of the commands TPM_LoadKey2 and TPM_GetPubKey are provided. Both features are available using the 'tpm' command, too. Authorized commands are enabled with CONFIG_TPM_AUTH_SESSIONS. (Note that this also requires CONFIG_SHA1 to be enabled.) Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Fix ext2/ext4 filesystem accesses beyond 2TiBFrederic Leroy2013-07-15-1/+2
| | | | | | | | | | | | | | | | | With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives We now use lbaint_t for partition offset to reflect the lbaint_t change, and access partitions beyond or crossing the 2.1TiB limit. This required changes to signature of ext4fs_devread(), and type of all variables relatives to block sector. ext2/ext4 fs uses logical block represented by a 32 bit value. Logical block is a multiple of device block sector. To avoid overflow problem when calling ext4fs_devread(), we need to cast the sector parameter. Signed-off-by: Frédéric Leroy <fredo@starox.org>
* common: remove unaligned access error in bootmenu_getoption()Lan Yixun (dlan)2013-07-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Some ARM compilers may emit code that makes unaligned accesses when faced with constructs such as: char name[12] = "bootmenu_"; same fix as commit: 064d55f8bc8d7d205ed0be6abb6717e92eeb7cad ========================================================= data abort MAYBE you should read doc/README.arm-unaligned-accesses pc : [<3ff4b60c>] lr : [<3ff4b7b0>] sp : 3f346a58 ip : 3ff9c8e6 fp : 02000060 r10: 00000000 r9 : 3df47fc0 r8 : 3f347f40 r7 : 00000000 r6 : 00000000 r5 : 00000003 r4 : 3f759140 r3 : 000003f0 r2 : 00000000 r1 : 000003f1 r0 : 00000000 Flags: nzCv IRQs on FIQs off Mode SVC_32 Resetting CPU ... ====================================================== Signed-off-by: Lan Yixun (dlan) <dennis.yxun@gmail.com>
* scsi: Correct types of scsi_read/write()Simon Glass2013-07-15-4/+6
| | | | | | | | | | | | | The block device expects to see lbaint_t for the blknr parameter. Change the SCSI read/write functions to suit. This fixes the following build warnings for coreboot: cmd_scsi.c: In function ‘scsi_scan’: cmd_scsi.c:119:30: error: assignment from incompatible pointer type [-Werror] cmd_scsi.c:120:32: error: assignment from incompatible pointer type [-Werror] Signed-off-by: Simon Glass <sjg@chromium.org>
* bootm: Handle errors consistentlySimon Glass2013-07-12-13/+8
| | | | | | | | | | | | A recent bootm fix left the error path incomplete. If CONFIG_TRACE is set it may still not be a supported command, so cover that with the unsupported subcommand print. Once we handle BOOTM_STATE_OS_GO, we can just move into the error handler itself, no need for a goto there. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Update slightly based on Simon's changes to also cover CONFIG_TRACE/BOOTM_STATE_FAKE_OS_GO] Signed-off-by: Tom Rini <trini@ti.com>
* common/image.c: Fix regression with ramdisk load/entry points in FITStefano Babic2013-07-12-1/+1
| | | | | | | | A FIT image with a ramdisk that sets the entry or load points to 0x0 must be treated as meaning "leave in place" and NOT "relocate to 0x0". This regression was introduced in a51ec63. Signed-off-by: Stefano Babic <sbabic@denx.de>
* bootm: Correct the arguments for the ELF image loaderSimon Glass2013-07-12-3/+3
| | | | | | | The arguments were out of place since commit 983c72f, since this file was missed and not tested. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
* bootm: Use selected configuration for ramdisk and fdtSimon Glass2013-07-12-6/+11
| | | | | | | | | | | | | | | If a specific configuraion is selected by the bootm command, e.g. with 'bootm 84000000#recoveryconf' we must honour this for not just the kernel, but also the ramdisk and FDT. In the conversion to using a common fit_image_load() function for loading images from FITs (commits a51ec63 and 53f375f) this feature was lost. Reinstate it by passing the selected configuration back from fit_image_load() to boot_get_kernel(), then use this configuration (which is stored in images->fit_uname_cfg) in both boot_get_ramdisk() and boot_get_fdt(). Signed-off-by: Simon Glass <sjg@chromium.org>
* blackfin: x86: bootm: Handle PREP stage of bootmSimon Glass2013-07-12-0/+16
| | | | | | | The OS function is now always called with the PREP stage. Adjust the remaining bootm OS functions to deal with this correctly. Signed-off-by: Simon Glass <sjg@chromium.org>
* bootm: Remove extra OK messageSimon Glass2013-07-12-1/+0
| | | | | | This is not needed as we already print 'OK' later in all cases. Signed-off-by: Simon Glass <sjg@chromium.org>
* cmd_bootm.c: Re-order bootm_load_os return check for ELDK4.2Tom Rini2013-07-12-3/+2
| | | | | | | | | | | With ELDK4.2 we were getting a warning that load_end may be used uninitialized in calling lmb_reserve. This could not be the case, however. If we re-order the checks (and make them slightly clearer as well) the warning goes away. bootm_load_os may only return 0 on success, BOOTM_ERR_OVERLAP in a non-fatal overlap (already covered in comments) or a fatal BOOTM_ERR that is covered in the error handler. Signed-off-by: Tom Rini <trini@ti.com>
* cmd_bootm.c: Make bootz handle BOOTM_STATE_FINDOTHER itselfTom Rini2013-07-10-16/+40
| | | | | | | | | As a zImage does not have a U-Boot header, we cannot really do what BOOTM_STATE_FINDOTHER does, exactly. Break the ramdisk/fdt portions of bootm_find_other into bootm_find_ramdisk/fdt which can be called in both cases. Signed-off-by: Tom Rini <trini@ti.com>
* cmd_bootm.c: Make bootz consume 'bootz' from argv, decrement argcTom Rini2013-07-10-5/+13
| | | | | | | Like 'bootm', 'bootz' needs to consume 'bootz' so that the rest of the state functions will work. Signed-off-by: Tom Rini <trini@ti.com>
* bootm: Add the missing PREP stage to bootz and correct image handlingSimon Glass2013-07-10-2/+3
| | | | | | | | | | | | | In the recent bootm refactor, the PREP stage was missing in the bootz command. This causes unpredictable behaviour. The use of a local variable means that the reset of cmd_bootm.c does not in fact use the same image structure, so remove this. Also manually set the OS type to Linux, since this is the only possibility at present, and we need to select the right boot function. Signed-off-by: Simon Glass <sjg@chromium.org>
* bootm: Clean up bootz_setup() functionSimon Glass2013-07-10-5/+3
| | | | | | | | | This function has no prototype in the headers and passes void * around, thus requiring several casts. Tidy this up. - Add new patch to clean up bootz_setup() function Signed-off-by: Simon Glass <sjg@chromium.org>
* bootm: Require boot function only if it is about to be usedSimon Glass2013-07-10-2/+5
| | | | | | | | | | | The original bootm code (before commit 35fc84f) did not check for a valid boot function in the subcommand case, which was incorrect. This check was introduced in all cases, but in fact we should only check for the function when we need it. Otherwise in some cases the check fires before the OS type is known. Signed-off-by: Simon Glass <sjg@chromium.org>
* bootm: Disable interrupts only when loadingSimon Glass2013-07-10-24/+43
| | | | | | | | | | | With the move of the interrupt code to earlier in the sequence, we exposed a problem where the interrupts are disabled at each bootm stage. This is not correct - it should be done only once. Let's disable interrupts in the LOAD stage. Put the code in a function for clarity. Also, bootz lost its interrupt code altogether, so reinstate it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2013-07-10-47/+96
|\
| * video: consolidate splash screen alignment codeAnatolij Gustschin2013-07-08-17/+30
| | | | | | | | | | | | | | | | | | | | Code for checking "splashpos" environment variable is duplicated in drivers, move it to the common function. Call this function also in the bmp display command to consider "splashpos" settings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| * video: lcd: Make splash_screen_prepare weak, remove config macroRobert Winkler2013-07-01-9/+4
| | | | | | | | | | | | | | | | Remove CONFIG_SPLASH_SCREEN_PREPARE from README Add doc/README.splashprepare to document functionality Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEORobert Winkler2013-07-01-13/+40
| | | | | | | | | | | | | | | | Create splash.c/h to put the function and any future common splash screen code in. Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * lcd: align bmp header when uncopmressing imagePiotr Wilczek2013-07-01-14/+28
| | | | | | | | | | | | | | | | | | | | | | | | When compressed image is loaded, it must be decompressed to an aligned address + 2 to avoid unaligned access exception on some ARM platforms. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Anatolij Gustschin <agust@denx.de> CC: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * lcd: remove unaligned access in lcd_dt_simplefb_configure_node()Stephen Warren2013-07-01-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Some ARM compilers may emit code that makes unaligned accesses when faced with constructs such as: const char format[] = "r5g6b5"; Make this data static since it doesn't chagne; the compiler will simply place it into the .rodata section directly, and avoid any unaligned run- time initialization. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | cmd_bootm.c: Correct check/return for unsupported sub-commandTom Rini2013-07-04-2/+7
| | | | | | | | | | | | | | | | | | | | | | With the do_bootm_states re-organization, we have the call to any potential sub-commands in a single spot. If one fails, we can then stop right there and return to the caller. Prior to these calls we have already ensured that ret is zero so we will not be returning this error for some other case. Signed-off-by: Tom Rini <trini@ti.com> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2013-07-01-8/+1
|\ \ | |/ |/|
| * nand: Don't call adjust_size_for_badblocks for eraseScott Wood2013-06-21-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | adjust_size_for_badblocks reduces the operation size to account for the block skipping done by the read/write functions when an interval (partition name or whole chip) is specified rather than a data amount. Erase does not do block skipping, except for erase.spread which takes a data amount rather than an interval (and thus already does not call adjust_size_for_badblocks). Calling adjust_size_for_badblocks when block skipping is not done means that if bad blocks are present, the "nand erase.part" and "nand erase.chip" commands will fail to erase blocks at the end of the interval. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Harvey Chapman <hchapman@3gfp.com> Acked-by: Heiko Schocher <hs@denx.de>
* | bootm: Disable interrupts before loading OSSimon Glass2013-06-28-26/+27
| | | | | | | | | | | | | | | | | | | | This restores the ordering of interrupt disable to what it what before commit 35fc84fa. It seems that on some archiectures (e.g. PowerPC) the OS is loaded into an interrupt region, which can cause problems if interrupts are still running. Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handlingTom Rini2013-06-28-27/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With 35fc84fa1 [Refactor the bootm command to reduce code duplication] we stopped checking the return value of bootm_load_os (unintentionally!) and simply returned if we had a non-zero return value from the function. This broke the valid case of a legacy image file of a single kernel loaded into an overlapping memory area (the default way of booting nearly all TI platforms). The best way to fix this problem in the new code is to make bootm_load_os be the one to see if we have a problem with this, and if it's fatal return BOOTM_ERR_RESET and if it's not BOOTM_ERR_OVERLAP, so that we can avoid calling lmb_reserve() but continue with booting. We however still need to handle the other BOOTM_ERR values so re-work do_bootm_states so that we have an error handler at the bottom we can goto for problems from bootm_load_os, or problems from the other callers (as the code was before). Add a comment to do_bootm_states noting the existing restriction on negative return values. Signed-off-by: Tom Rini <trini@ti.com> --- Changes in v2: - Rework so that only bootm_load_os and boot_selected_os head down into the err case code, and other errors simply return back to the caller. Fixes 'spl export'.
* | Fix block device accesses beyond 2TiBSascha Silbe2013-06-26-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives. For some obscure reason, the current U-Boot code uses lbaint_t for the number of blocks to read (a rather optimistic estimation of how RAM sizes will evolve), but not for the starting address. Trying to access blocks beyond the 2TiB boundary will simply wrap around and read a block within the 0..2TiB range. We now use lbaint_t for block start addresses, too. This required changes to all block drivers as the signature of block_read(), block_write() and block_erase() in block_dev_desc_t changed. Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de>
* | cmd_bootm: Add command line arguments to Plan 9Steven Stallion2013-06-26-7/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces support for command line arguments to Plan 9. Plan 9 generally dedicates a small region of kernel memory (known as CONFADDR) for runtime configuration. A new environment variable named confaddr was introduced to indicate this location when copying arguments. Signed-off-by: Steven Stallion <sstallion@gmail.com> [trini: Adapt for Simon's changes about correcting argc, no need to bump by 2 now] Signed-off-by: Tom Rini <trini@ti.com>
* | image: Add support for signing of FIT configurationsSimon Glass2013-06-26-1/+230
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While signing images is useful, it does not provide complete protection against several types of attack. For example, it it possible to create a FIT with the same signed images, but with the configuration changed such that a different one is selected (mix and match attack). It is also possible to substitute a signed image from an older FIT version into a newer FIT (roll-back attack). Add support for signing of FIT configurations using the libfdt's region support. Please see doc/uImage.FIT/signature.txt for more information. Signed-off-by: Simon Glass <sjg@chromium.org>
* | image: Add RSA support for image signingSimon Glass2013-06-26-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | RSA provides a public key encryption facility which is ideal for image signing and verification. Images are signed using a private key by mkimage. Then at run-time, the images are verified using a private key. This implementation uses openssl for the host part (mkimage). To avoid bringing large libraries into the U-Boot binary, the RSA public key is encoded using a simple numeric representation in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* | image: Support signing of imagesSimon Glass2013-06-26-23/+204
| | | | | | | | | | | | | | | | Add support for signing images using a new signature node. The process is handled by fdt_add_verification_data() which now takes parameters to provide the keys and related information. Signed-off-by: Simon Glass <sjg@chromium.org>
* | image: Add signing infrastructureSimon Glass2013-06-26-0/+43
| | | | | | | | | | | | | | Add a structure to describe an algorithm which can sign and (later) verify images. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add a 'fake' go command to the bootm commandSimon Glass2013-06-26-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For tracing it is useful to run as much of U-Boot as possible so as to get a complete picture. Quite a bit of work happens in bootm, and we don't want to have to stop tracing before bootm starts. Add a way of doing a 'fake' boot of the OS - which does everything up to the point where U-Boot is about to jump to the OS image. This allows tracing to record right until the end. This requires arch support to work. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Refactor the bootm command to reduce code duplicationSimon Glass2013-06-26-241/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present the bootm code is mostly duplicated for the plain 'bootm' command and its sub-command variant. This makes the code harder to maintain and means that changes must be made to several places. Introduce do_bootm_states() which performs selected portions of the bootm work, so that both plain 'bootm' and 'bootm <sub_command>' can use the same code. Additional duplication exists in bootz, so tidy that up as well. This is not intended to change behaviour, apart from minor fixes where the previously-duplicated code missed some chunks of code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Clarify bootm OS argumentsSimon Glass2013-06-26-31/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | At present the arguments to bootm are processed in a somewhat confusing way. Sub-functions must know how many arguments their calling functions have processed, and the OS boot function must also have this information. Also it isn't obvious that 'bootm' and 'bootm start' provide arguments in the same way. Adjust the code so that arguments are removed from the list before calling a sub-function. This means that all functions can know that argv[0] is the first argument of which they need to take notice. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add trace support to generic boardSimon Glass2013-06-26-1/+27
| | | | | | | | | | | | | | | | | | | | | | Add hooks for tracing to generic board, including: - allow early tracing to start early as possible in U-Boot - reserve memory for trace buffer - copy early trace buffer to main trace buffer after relocation - setup full tracing support after relocation Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add a trace commandSimon Glass2013-06-26-0/+134
| | | | | | | | | | | | | | Add a trace command with sub-commands to start/stop tracing, print out statistics and dump trace information to memory for later upload to a host. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add function to print a number with grouped digitsSimon Glass2013-06-26-18/+4
| | | | | | | | | | | | | | Move bootstage's numbering printing code into a generic place so that it can be used by tracing also. Signed-off-by: Simon Glass <sjg@chromium.org>
* | bootstage: Correct printf typesSimon Glass2013-06-26-2/+2
| | | | | | | | | | | | | | The unstash code is a bit loose with its printf() types, which gives warnings on sandbox. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Fix missing return in do_mem_loop()Simon Glass2013-06-26-0/+2
| | | | | | | | | | | | | | For some reason this does not normally cause a compiler warning, but the code seems to be incorrect. Add the missing return. Signed-off-by: Simon Glass <sjg@chromium.org>
* | pxe: add ipappend supportRob Herring2013-06-24-3/+44
| | | | | | | | | | | | Add ipappend support to pass network device information to the kernel. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | net: Fix build regression in cmd_pxe.cJoe Hershberger2013-06-24-0/+2
| | | | | | | | | | | | | | | | Not all boards define an SOC. As a result, we can't depend on that. This was introduced in 39f985536d3f0df5dba32c15b64ba2b5d32dd296 Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | pxe: add support for per arch and SoC default pathsRob Herring2013-06-24-6/+20
| | | | | | | | | | | | | | | | | | A pxelinux server setup for "default" menu is typically an x86 binary. This does not work well with a mixed architecture setup. Extend the default search to look for default-<arch>-<soc> and then default-<arch> before falling back to just "default". Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | pxe: add support for ontimeout tokenRob Herring2013-06-24-5/+6
| | | | | | | | | | | | | | | | | | ontimeout is similar to default, but is the selection on menu timeout. This is how cobbler sets a default. The label default is supposed to be the default selection when <enter> is pressed. If both default and ontimeout are set, last one parsed wins. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | pxe: simplify menu display and selectionRob Herring2013-06-24-18/+16
| | | | | | | | | | | | | | | | Menus with lots of entries and long append lines are hard to read. Just show a numbered list using the label or name and make the choice by entering the number. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | pxe: always display a menu when presentRob Herring2013-06-24-1/+2
| | | | | | | | | | | | | | | | | | The prompt flag is for displaying a "boot:" prompt in pxelinux. This doesn't make sense for u-boot as we don't support the pxelinux command interface. So we should just ignore prompt statements and always show the menu if a menu is present. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | pxe: try bootz if bootm fails to find a valid imageRob Herring2013-06-24-1/+10
| | | | | | | | | | | | | | Standard pxelinux servers will typically use a zImage rather than u-boot image format, so fallback to bootz if bootm fails. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
generated by cgit v1.1 at 2024-11-18 16:27:53 +0000