summaryrefslogtreecommitdiff
path: root/common/serial.c
Commit message (Collapse)AuthorAgeLines
* serial: Move common/serial.c to drivers/serial/Marek Vasut2012-10-15-354/+0
| | | | | | | | | | Move the common/serial.c into driver/serial/, since this file provides serial multiplexing functions and it is imperative to be linked with libserial.o instead of libcommon.o. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: Use puts() and hang() instead of panic() in SPLMarek Vasut2012-10-15-2/+8
| | | | | | | | | | | | | | | | If case the get_current() call fails before relocation, the U-Boot must try to print an error message, fail and either reset or halt. Such error is critical enough to halt the system, as it means the system is in very bad state. This is now also used in SPL, since CONFIG_SERIAL_MULTI is enabled unconditionally. To avoid compiling whole vsprintf.c into SPL, use puts() to print error message and hang() to stop the system in case of SPL build. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into sh serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the sh driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Phil Edworthy <PHIL.EDWORTHY@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into sa1100 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into sa1100 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the sa1100 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into s3c44b0 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into s3c44b0 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the s3c44b0 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into pl01x serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into pl01x serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the pl01x driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Mathieu J. Poirier <mathieu.poirier@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: John Rigby <john.rigby@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into netarm serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into netarm serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the netarm driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de>
* serial: arm: Implement CONFIG_SERIAL_MULTI into mxc serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into mxc serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the mxc driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de>
* serial: Implement CONFIG_SERIAL_MULTI into max3100 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into max3100 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the max3100 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into lpc2292 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into lpc2292 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the lpc2292 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into lh7a40x serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into lh7a40x serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the lh7a40x driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into ks8695 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into ks8695 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the ks8695 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into ixp serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into ixp serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the ixp driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Michael Schwingen <michael@schwingen.org>
* serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into imx serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the imx driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de>
* serial: arm: Implement CONFIG_SERIAL_MULTI into clps7111 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into clps7111 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the clps7111 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: sandbox: Implement CONFIG_SERIAL_MULTI into sandbox serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into sandbox serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the sandbox driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: arm: Implement CONFIG_SERIAL_MULTI into s3c64xx serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into s3c64xx serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the s3c64xx driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: John Rigby <john.rigby@linaro.org> Cc: Minkyu Kang <mk7.kang@samsung.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into s3c4510b serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into s3c4510b serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the s3c4510b driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: oc: Implement CONFIG_SERIAL_MULTI into OpenCores serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into OpenCores serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the OpenCores driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Scott McNutt <smcnutt@psyent.com>
* serial: Implement CONFIG_SERIAL_MULTI into ns9750 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into ns9750 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the ns9750 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into MCF serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the MCF driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: TsiChung Liew <tsicliew@gmail.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into lpc32xx serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into lpc32xx serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the lpc32xx driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Vladimir Zapolskiy <vz@mleia.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into atmel serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the atmel driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Xu, Hong <Hong.Xu@atmel.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into altera serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the altera driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Scott McNutt <smcnutt@psyent.com>
* serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into altera_jtag serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the altera_jtag driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Thomas Chou <thomas@wytron.com.tw>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into p3mx serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into p3mx serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the p3mx driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into sconsole serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into sconsole serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the sconsole driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into ml2 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the ml2 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into evb64260 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into evb64260 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the evb64260 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into cpci750 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into cpci750 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the cpci750 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into cogent serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into cogent serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the cogent driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into bmw serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the bmw driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into amirix serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the amirix driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into marvell serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into marvell serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the marvell driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: sparc: Implement CONFIG_SERIAL_MULTI into leon3 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into leon3 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the leon3 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Peter Tyser <ptyser@xes-inc.com>
* serial: sparc: Implement CONFIG_SERIAL_MULTI into leon2 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into leon2 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the leon2 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Peter Tyser <ptyser@xes-inc.com>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into iop480 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the iop480 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into mpc85xx serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the mpc85xx driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial driversMarek Vasut2012-10-15-0/+4
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into both SCC and SMC mpc8260 serial drivers. These drivers were so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the mpc8260 drivers. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into mpc8220 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the mpc8220 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into mpc5xx serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the mpc5xx driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: mips: Implement CONFIG_SERIAL_MULTI into JZ serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into JZ serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the JZ driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* serial: mips: Implement CONFIG_SERIAL_MULTI into asc serial driverMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into asc serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the asc driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* serial: mips: Implement CONFIG_SERIAL_MULTI into au1x00 serial driverMarek Vasut2012-10-15-0/+3
| | | | | | | | | | | | | Implement support for CONFIG_SERIAL_MULTI into au1x00 serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the au1x00 driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTIMarek Vasut2012-10-15-0/+2
| | | | | | | | | | | | | | | | | | | Rework the emulation of serial console via JTAG from simple ad-hoc implementation of serial port routines to CONFIG_SERIAL_MULTI and enable CONFIG_SERIAL_MULTI unconditionally for blackfin. In order for the JTAG serial console to take precedence over all other serial ports available in system, implement override for default_serial_console call returning this JTAG serial console. This brings in a bit of a growth of size, but eventually will allow us to unconditionally enable CONFIG_SERIAL_MULTI throughout the whole U-Boot and maintain only one serial subsystem. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: bfin: Adjust serial_register_bfin_uart()Marek Vasut2012-10-15-3/+2
| | | | | | | | | | | | Rename the serial_register_bfin_uart() to bfin_initialize_serial() to be consistent with the rest of the naming. Next, remove it's prototype from serial.h and properly insert it into serial.c as the rest of the serial initialization functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: ns16550: Move serial registration from serial_initialize()Marek Vasut2012-10-15-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Move the registration of eserialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented ns16550_serial_initialize() function, which is implemented inside of the ns16550 serial driver allows encapsulation of eserialN_device within the ns16550 serial driver itself. Also, remove the exports of eserialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the ns16550 serial driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu>
* serial: mpc512x: Move serial registration from serial_initialize()Marek Vasut2012-10-15-14/+2
| | | | | | | | | | | | | | | | | | | | | | | Move the registration of serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented mpc512x_serial_initialize() function, which is implemented inside of the mpc512x serial driver allows encapsulation of serialN_device within the mpc512x serial driver itself. Also, remove the exports of serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the mpx512x serial driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: microblaze: Move serial registration from serial_initialize()Marek Vasut2012-10-15-14/+2
| | | | | | | | | | | | | | | | | | | | | | Move the registration of xuartlite_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented xuartlite_serial_initialize() function, which is implemented inside of the serial_xuartlite driver allows encapsulation of xuartlite_serialN_device within the serial_xuartlite driver itself. Also, remove the exports of xuartlite_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_xuartlite driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Michal Simek <monstr@monstr.eu>
* serial: zynq: Move serial registration from serial_initialize()Tom Rini2012-10-15-8/+2
| | | | | | | | | | | | | | | | | | | Move the registration of zynq_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented zynq_serial_initialize() function, which is implemented inside of the serial_zynq driver allows encapsulation of zynq_serialN_device within the serial_zynq driver itself. Also, remove the exports of zynq_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_zynq driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-12-21 15:40:22 +0000