summaryrefslogtreecommitdiff
path: root/common/cmd_mem.c
Commit message (Collapse)AuthorAgeLines
...
* cp/cmp: Add WATCHDOG_RESET in copy and compare loopStefan Roese2010-10-12-0/+8
| | | | | | | | | | | On some boards with a very short watchdog timeout, the "cp" and "cmp" commands may reset the board. This patch adds some watchdog resets inside the loops. Otherwise for example the lwmon5 board will reset while doing something like this: => cp.b fc000000 1000000 100000 Signed-off-by: Stefan Roese <sr@denx.de>
* cmd_usage(): simplify return code handlingWolfgang Denk2010-07-24-53/+27
| | | | | | | | | | | | | | | | Lots of code use this construct: cmd_usage(cmdtp); return 1; Change cmd_usage() let it return 1 - then we can replace all these ocurrances by return cmd_usage(cmdtp); This fixes a few places with incorrect return code handling, too. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Make sure that argv[] argument pointers are not modified.Wolfgang Denk2010-07-04-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hush shell dynamically allocates (and re-allocates) memory for the argument strings in the "char *argv[]" argument vector passed to commands. Any code that modifies these pointers will cause serious corruption of the malloc data structures and crash U-Boot, so make sure the compiler can check that no such modifications are being done by changing the code into "char * const argv[]". This modification is the result of debugging a strange crash caused after adding a new command, which used the following argument processing code which has been working perfectly fine in all Unix systems since version 6 - but not so in U-Boot: int main (int argc, char **argv) { while (--argc > 0 && **++argv == '-') { /* ====> */ while (*++*argv) { switch (**argv) { case 'd': debug++; break; ... default: usage (); } } } ... } The line marked "====>" will corrupt the malloc data structures and usually cause U-Boot to crash when the next command gets executed by the shell. With the modification, the compiler will prevent this with an error: increment of read-only location '*argv' N.B.: The code above can be trivially rewritten like this: while (--argc > 0 && **++argv == '-') { char *arg = *argv; while (*++arg) { switch (*arg) { ... Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* move prototypes for gunzip() and zunzip() to common.hWolfgang Wegner2009-12-21-2/+0
| | | | | | | | Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus repeated in every file using it. This patch moves the prototypes to common.h and removes all prototypes distributed anywhere else. Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
* mem_mtest: fix error reporting, allow escape with ^CPaul Gortmaker2009-10-18-14/+44
| | | | | | | | | | | | | | | | | | | | | | | | The basic memtest function tries to watch for ^C after each pattern pass as an escape mechanism, but if things are horribly wrong, we'll be stuck in an inner loop flooding the console with error messages and never check for ^C. To make matters worse, if the user waits for all the error messages to complete, we then incorrectly report the test passed without errors. Adding a check for ^C after any error is printed will give the end user an escape mechanism from a console flood without slowing down the overall test speed on a slow processor. Also, the more extensive memtest quit after just a single error, which is inconsistent with the normal memtest, and not useful if if you are doing dynamic environmental impact testing, such as heating/cooling etc. Both tests now track the error count and report it properly at test completion. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Add md5sum and sha1 commands...Robin Getz2009-08-25-0/+68
| | | | | | | Now that we have sha1 and md5 in lib_generic, allow people to use them on the command line, for checking downloaded files. Signed-off-by: Robin Getz <rgetz@analog.com>
* General help message cleanupWolfgang Denk2009-06-12-20/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
* Eliminate support for using MMC as memoryAndy Fleming2009-02-16-43/+0
| | | | | | MMC cards are not memory, so we stop treating them that way. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Command usage cleanupPeter Tyser2009-01-28-15/+15
| | | | | | | | Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Standardize command usage messages with cmd_usage()Peter Tyser2009-01-28-12/+12
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* common: Iteration limit for memory test.Dirk Eibach2009-01-24-14/+31
| | | | | | | | | The iteration limit is passed to mtest as a fourth parameter: [start [end [pattern [iterations]]]] If no fourth parameter is supplied, there is no iteration limit and the test will loop forever. Signed-off-by: Dirk Eibach <eibach@gdsys.de>
* cmd_mem: Remove unused variablePeter Tyser2008-12-14-1/+0
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-9/+9
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* cmd_mem: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-09-10-4/+0
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* move cmd_get_data_size to command.cJean-Christophe PLAGNIOL-VILLARD2008-09-10-29/+0
| | | | | | add CMD_DATA_SIZE macro to enable it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)Markus Heidelberg2008-09-09-2/+0
| | | | Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
* cmd_mem.c: Fix help message alignmentWolfgang Denk2008-08-26-15/+15
| | | | | | Bug was introced by "Big white-space cleanup" (53677ef1) Signed-off-by: Wolfgang Denk <wd@denx.de>
* add 'unzip' command to u-boot commandlineHarald Welte2008-08-18-0/+36
| | | | | | | | | | [PATCH] add new 'unzip' command to u-boot commandline common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from memory to memory, and option CONFIG_CMD_UNZIP to enable it Signed-off-by: Werner Almesberger <werner@openmoko.org> Signed-off-by: Harald Welte <laforge@openmoko.org>
* Big white-space cleanup.Wolfgang Denk2008-05-21-30/+30
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of /home/wd/git/u-boot/lwmon5Wolfgang Denk2008-04-25-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: common/cmd_bootm.c common/cmd_log.c include/common.h post/board/lwmon5/Makefile post/board/lwmon5/dsp.c post/board/lwmon5/dspic.c post/board/lwmon5/fpga.c post/board/lwmon5/gdc.c post/board/lwmon5/sysmon.c post/board/lwmon5/watchdog.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Added watchdog triggering calls in the "mtest" test function.Sergei Poselenov2008-04-22-0/+7
| | | | | | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* | Fix CFG_NO_FLASH compilation.Stelian Pop2008-03-30-1/+5
|/ | | | | | | | | Many Atmel boards have no "real" (NOR) flash on board, and rely only on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to be present in a board configuration file, while still enabling flash commands like 'flinfo', 'protect', etc. Signed-off-by: Stelian Pop <stelian@popies.net>
* fix copy from ram to dataflashKim B. Heino2008-03-03-1/+1
| | | | | | | | If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash routines instead of dataflash. This is because it checks "if source address is not dataflash" instead of target address. Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
* Fix wrong memory limit calculation in memory-testGuennadi Liakhovetski2008-02-15-15/+8
| | | | | | | | | | If the length of the memory address range passed to the "mtest" command is not of the form 2^x - 1, not all address lines are tested. This bug is inherited from the original software at http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix this. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-blackfinWolfgang Denk2008-02-15-3/+48
|\ | | | | | | | | | | | | | | | | Conflicts: Makefile doc/README.standalone Signed-off-by: Wolfgang Denk <wd@denx.de>
| * add support for memory commands with Blackfin L1 instruction memoryMike Frysinger2008-02-04-3/+48
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Fix return value of mtest when CFG_ALT_MEMTEST setGuennadi Liakhovetski2008-02-14-2/+2
|/ | | | | | Fix a missing return statement from a non-void function. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
* common/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-1/+1
| | | | | | | | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.Jon Loeliger2007-07-08-10/+5
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-5/+11
| | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* [PATCH 3_9] Move buffer print code from md command to common functionGrant Likely2007-02-20-51/+14
| | | | | | | Printing a buffer is a darn useful thing. Move the buffer print code into print_buffer() in lib_generic/ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Make code better readable.Wolfgang Denk2006-07-21-1/+1
| | | | Patch by Ladislav Michl, 14 Sep 2005
* Cleanup for GCC-4.xWolfgang Denk2005-10-13-2/+2
|
* memory commands "mdc" and "mwc" added for cyclic read/writestroese2004-12-16-0/+74
|
* * Patch by Gridish Shlomi, 30 Aug 2004:wdenk2004-10-10-1/+1
| | | | | | | | | | | | | | | | | - Add support to revA version of PQ27 and PQ27E. - Reverted MPC8260ADS baudrate back to original 115200 * Patch by Hojin, 17 Sep 2004: Fix typo in cfi_flash.c * Patch by Mark Jonas, 09 September 2004: mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong error message * Patch by Mark Jonas, 31 August 2004: Added option CFG_XLB_PIPELINING to enable XLB pipelining. This improves FTP performance for MPC5200 systems. Enabled for IceCube by default.
* * Cleanupwdenk2004-07-11-2/+2
| | | | | | | | | * Patch by Mark Jonas, 05 Jul 2004: add support for the Total5100's and Total5200's LCD screen * Patches by Dan Eisenhut, 01 Jul 2004: - README fixes. - Move doc2000.h include to prevent compiler warning on some boards
* * Patch by Martin Krause, 30 Jun 2004:wdenk2004-07-11-0/+84
| | | | | | | Add support for TQM5200 board * Patch by Martin Krause, 29 Jun 2004: Add loopw command: infinite write loop on address range
* * Cleanup, minor fixeswdenk2004-04-18-1/+1
| | | | | | | | | * Patch by Rune Torgersen, 16 Apr 2004: LBA48 fixes * Patches by Pantelis Antoniou, 16 Apr 2004: - Fix some compile problems; add "once" functionality for the netretry variable
* Patches by Pantelis Antoniou, 16 Apr 2004:wdenk2004-04-18-0/+71
| | | | | | | | | | | | | | | | | - add support for a new version of an Intracom board and fix various other things on others. - add verify support to the crc32 command (define CONFIG_CRC32_VERIFY to enable it) - fix FEC driver for MPC8xx systems: 1. fix compilation problems for boards that use dynamic allocation of DPRAM 2. shut down FEC after network transfers - HUSH parser fixes: 1. A new test command was added. This is a simplified version of the one in the bourne shell. 2. A new exit command was added which terminates the current executing script. 3. Fixed handing of $? (exit code of last executed command)
* * Patches by Thomas Viehweger, 16 Mar 2004:wdenk2004-03-23-15/+15
| | | | | | | | | - show PCI clock frequency on MPC8260 systems - add FCC_PSMR_RMII flag for HiP7 processors - in do_jffs2_fsload(), take load address from load_addr if not set explicit, update load_addr otherwise - replaced printf by putc/puts when no formatting is needed (smaller code size, faster execution)
* * Patch by Masami Komiy, 22 Feb 2004:wdenk2004-02-24-0/+1
| | | | | | Add support for NFS for file download * Minor code cleanup
* * Patch by Thomas Elste, 10 Feb 2004:wdenk2004-02-23-0/+2
| | | | | | | | | | | | | | Add support for NET+50 CPU and ModNET50 board * Patch by Sam Song, 10 Feb 2004: Fix typos in cfi_flash.c * Patch by Leon Kukovec, 10 Feb 2004 Fixed long dir entry slot id calculation in get_vfatname * Patch by Robin Gilks, 10 Feb 2004: add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=)
* * Cleanup lowboot code for MPC5200wdenk2004-01-02-6/+6
| | | | | | | | | | | | | | | | | | * Minor code cleanup (coding style) * Patch by Reinhard Meyer, 30 Dec 2003: - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, - added CONFIG_PHY_ADDR to include/configs/IceCube.h, - turned debug print of PHY registers into a function (called in two places) - added support for EMK MPC5200 based modules * Fix MPC8xx PLPRCR_MFD_SHIFT typo * Add support for TQM866M modules * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) * Fix a few compiler warnings
* * Patch by Nicolas Lacressonnière, 12 Nov 2003:wdenk2003-12-06-4/+15
| | | | | | | | | | | | | | update for for Atmel AT91RM9200DK development kit: - support for environment variables in DataFlash - Atmel DataFlash AT45DB1282 support * Patch by Jeff Carr, 11 Nov 2003: add support for new version of 8270 processors * Patches by George G. Davis, 05 Nov 2003: - only pass the ARM linux initrd tag to the kernel when an initrd is actually present - update omap1510inn configuration file
* * Patches by Anders Larsen, 17 Sep 2003:wdenk2003-09-18-0/+4
| | | | | | | | | | - fix spelling errors - set GD_FLG_DEVINIT flag only after device function pointers are valid - Allow CFG_ALT_MEMTEST on systems where address zero isn't writeable - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs - trigger watchdog while waiting in serial driver
* * Implement new mechanism to export U-Boot's functions to standalonewdenk2003-07-24-13/+26
| | | | | | | | applications: instead of using (PPC-specific) system calls we now use a jump table; please see doc/README.standalone for details * Patch by Dave Westwood, 24 Jul 2003: added support for Unity OS (a proprietary OS)
* Patch by Kenneth Johansson, 30 Jun 2003:wdenk2003-07-01-20/+20
| | | | get rid of MK_CMD_ENTRY macro; update doc/README.command
* Rewrite command lookup and help command (fix problems with bubblewdenk2003-06-28-2/+4
| | | | sort when sorting command name list). Minor cleanup here and there.
* * Code cleanup:wdenk2003-06-27-3/+70
| | | | | | | | | - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
* * Patch by Nicolas Lacressonniere, 11 Jun 2003:wdenk2003-06-16-1/+71
| | | | | | | | | | | | | | | | Modifications for Atmel AT91RM9200DK ARM920T based development kit - Add Atmel DataFlash support for reading and writing. - Add possibility to boot a Linux from DataFlash with BOOTM command. - Add Flash detection on Atmel AT91RM9200DK (between Atmel AT49BV1614 and AT49BV1614A flashes) - Replace old Ethernet PHY layer functions - Change link address * Patch by Frank Smith, 9 Jun 2003: use CRIT_EXCEPTION for machine check on 4xx * Patch by Detlev Zundel, 13 Jun 2003: added implementation of the "carinfo" command in cmd_immap.c