summaryrefslogtreecommitdiff
path: root/common/cmd_ide.c
Commit message (Collapse)AuthorAgeLines
* common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOULHeiko Schocher2009-12-08-2/+2
| | | | | | | | | There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs@denx.de>
* mucmc52, uc101: delete ata@3a00 node, if no CF card is detectedHeiko Schocher2009-09-25-0/+8
| | | | | | | | | | | U-Boot can detect if an IDE device is present or not. If not, and this new config option is activated, U-Boot removes the ATA node from the DTS before booting Linux, so the Linux IDE driver does not probe the device and crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. Signed-off-by: Heiko Schocher <hs@denx.de>
* MPC512x: remove include/mpc512x.hWolfgang Denk2009-06-12-4/+0
| | | | | | | | | | | | | | | | | | | | Move needed definitions (register descriptions etc.) from include/mpc512x.h into include/asm-ppc/immap_512x.h. Instead of using a #define'd register offset, use a function that provides the PATA controller's base address. All the rest of include/mpc512x.h are register offset definitions which can be eliminated by proper use of C structures. There are only a few register offsets remaining that are needed in cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h which is intended as a temporary workaround only. In a later patch this file will be removed, too, and then auto-generated from the respective C structs. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* General help message cleanupWolfgang Denk2009-06-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
* common: fix inline--weak error spotted by gcc 4.4Kim Phillips2009-05-20-2/+2
| | | | | | | | cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak removing the inline attribute fixes it. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* cmd_ide: Remove unused AmigaOneG3SE codePeter Tyser2009-04-28-44/+0
| | | | | | | The output_data_short() and input_data_short() functions for the AmigaOneG3SE are unused and result in compiler warnings. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* vsprintf: pull updates from Linux kernelMike Frysinger2009-03-20-5/+5
| | | | | | | | | | | | | This brings in support for the %p modifier which allows us to easily print out things like ip addresses, mac addresses, and pointers. It also converts the rarely used 'q' length modifier to the common 'L' modifier when dealing with quad types. While this new code is a bit larger (~1k .text), most of it should be made up by converting the existing ip/mac address code to use format modifiers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* ADS5121 Add PATA supportRalph Kondziella2009-02-03-0/+4
| | | | | | | | | | | | Original patch from Ralph Kondziella plus clean up by Wolfgang Denk plus changes by John Rigby use ips clock not lpc port forward to current u-boot release Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: John Rigby <jrigby@freescale.com>
* Command usage cleanupPeter Tyser2009-01-28-2/+2
| | | | | | | | Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Standardize command usage messages with cmd_usage()Peter Tyser2009-01-28-5/+5
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* common/cmd_ide.c: Corrected endian order printing for compact flash serial ↵Richard Retanubun2008-12-07-3/+4
| | | | | | | | number. Corrected endian order printing for compact flash serial number. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-78/+78
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix typo in spelling of ATAPI.Steven A. Falco2008-08-21-2/+2
| | | | | | Correct a small spelling mistake. Signed-off-by: Steven A. Falco <sfalco@harris.com>
* Add a hook to allow board-specific PIO mode setting.Steven A. Falco2008-08-21-0/+46
| | | | | | | | | | | | | This patch adds a hook whereby a board-specific routine can be called to configure hardware for a PIO mode. The prototype for the board-specific routine is: int inline ide_set_piomode(int pio_mode) ide_set_piomode should be prepared to configure hardware for a pio_mode between 0 and 6, inclusive. It should return 0 on success or 1 on failure. Signed-off-by: Steven A. Falco <sfalco@harris.com>
* Fix merge problemsStefan Roese2008-08-06-26/+24
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* Delay FIT format check on sector based devicesMarian Balakowicz2008-06-30-9/+10
| | | | | | | | | | Global FIT image operations like format check cannot be performed on a first sector data, defer them to the point when whole FIT image was uploaded to a system RAM. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com> NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
* Big white-space cleanup.Wolfgang Denk2008-05-21-3/+3
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ide: Remove spurious second include of io.hMarcel Ziswiler2008-05-09-4/+0
| | | | | | Removed the second include, with all the #ifdef around as suggested by Wolfgang. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* IDE: fix compiler warningsGuennadi Liakhovetski2008-04-28-2/+12
| | | | | | | The IDE driver can use 32-bit addresses in LBA mode, in which case it spits multiple warnings during compilation. Fix them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
* IDE: fix bug in reset sequenceMartin Krause2008-04-17-0/+3
| | | | | | | | | | | | | According to the ata (ata5) specification the RESET- signal shall be asserted for at least 25 us. Without this patch, the RESET- signal is asserted on some boards for only < 1 us (e. g. on the TQM5200). This patch adds a general delay of 25 us to the RESET- signal. Without this patch a Platinum 4 GiB CF card is not recognised properly on boards with a TQM5200 (STK52xx, TB5200). Signed-off-by: Martin Krause <martin.krause@tqs.de>
* [new uImage] Use show_boot_progress() for new uImage formatMarian Balakowicz2008-03-12-0/+2
| | | | | | | This patch allocates a set of show_boot_progress() IDs for new uImage format and adds show_boot_progress() calls in new uImage format handling code. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* [new uImage] Add new uImage format handling to other bootm related commandsMarian Balakowicz2008-03-12-7/+18
| | | | | | | | | | | | | Updated commands: docboot - cmd_doc.c fdcboot - cmd_fdc.c diskboot - cmd_ide.c nboot - cmd_nand.c scsiboot - cmd_scsi.c usbboot - cmd_usb.c Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* [new uImage] Update naming convention for bootm/uImage related codeMarian Balakowicz2008-02-29-1/+1
| | | | | | | | | | | | | | | This patch introduces the following prefix convention for the image format handling and bootm related code: genimg_ - dual format shared code image_ - legacy uImage format specific code fit_ - new uImage format specific code boot_ - booting process related code Related routines are renamed and a few pieces of code are moved around and re-grouped. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* [new uImage] Add dual format uImage support frameworkMarian Balakowicz2008-02-25-14/+27
| | | | | | | | | | | | | | This patch adds framework for dual format images. Format detection is added and the bootm controll flow is updated to include cases for new FIT format uImages. When the legacy (image_header based) format is detected appropriate legacy specific handling is invoked. For the new (FIT based) format uImages dual boot framework has a minial support, that will only print out a corresponding debug messages. Implementation of the FIT specific handling will be added in following patches. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* [new uImage] Rename and move print_image_hdr() routineMarian Balakowicz2008-02-21-1/+1
| | | | Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* [new uImage] Define a API for image handling operationsMarian Balakowicz2008-02-07-8/+4
| | | | | | | | | - Add inline helper macros for basic header processing - Move common non inline code common/image.c - Replace direct header access with the API routines - Rename IH_CPU_* to IH_ARCH_* Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu2007-12-07-4/+0
|\ | | | | | | | | | | Conflicts: drivers/Makefile
| * [BUILD] conditionally compile common/cmd_*.c in common/MakefileGrant Likely2007-11-20-4/+0
| | | | | | | | | | | | | | Modify common/Makefile to conditionally compile the cmd_*.c files based on the board config. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu2007-11-29-10/+6
|\ \ | |/ | | | | | | | | Conflicts: drivers/Makefile
| * Fixed mips_io_port_base build errors.Jean-Christophe PLAGNIOL-VILLARD2007-11-17-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been sent on: - 29 Sep 2007 Although mips_io_port_base is currently a part of IDE command, it is quite fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move it to MIPS general part, and introduce `set_io_port_base()' from Linux. This patch is triggered by multiple definition of `mips_io_port_base' build error on gth2 (and tb0229 also needs this fix.) board/gth2/libgth2.a(gth2.o): In function `log_serial_char': /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here make: *** [u-boot] Error 1 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Fix warning differ in signedness in common/cmd_ide.cJean-Christophe PLAGNIOL-VILLARD2007-11-16-6/+6
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | sh: Add support command of ide with shNobuhiro Iwamatsu2007-09-23-2/+2
|/ | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* IDE: - make ide_inb () and ide_outb () "weak", so boards canHeiko Schocher2007-08-28-35/+16
| | | | | | | | | define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-06-2/+2
|\
| * Merge branch 'testing' into workingAndy Fleming2007-08-03-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| | * common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.Jon Loeliger2007-07-08-2/+2
| | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | * common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | make show_boot_progress () weak.Heiko Schocher2007-07-13-28/+21
|/ / | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | [PCS440EP] upgrade the PCS440EP board:Heiko Schocher2007-06-22-14/+46
|/ | | | | | | | | | | | - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
* Fix config problems on SC3 board; make ide_reset_timeout work.Wolfgang Denk2007-06-08-2/+2
|
* [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.cDenis Peter2007-04-13-1/+1
| | | | | | | | Fix bug introduced by "Fix get_partition_info() parameter error in all other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented to use diskboot or scsiboot form another device than 0. Signed-off-by: Denis Peter <d.peter@mpl.ch>
* [PATCH] Fix use of "void *" for block dev read/write buffer pointersGreg Lopp2007-04-13-3/+3
| | | | | Signed-of-by: Greg Lopp <lopp@pobox.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* Update for SC3 boardWolfgang Denk2007-04-11-6/+7
| | | | | | * Make IDE timeout configurable through ide_reset_timeout variable. * Use Newline as "password" string * Use just a single partition in NAND flash
* [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write ↵Grant Likely2007-02-20-4/+4
| | | | | | | | | buffer pointers Block device read/write is anonymous data; there is no need to use a typed pointer. void * is fine. Also add a hook for block_read functions Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* [PATCH 1_4] Merge common get_dev() routines for block devicesGrant Likely2007-02-20-1/+7
| | | | | | | Each of the filesystem drivers duplicate the get_dev routine. This change merges them into a single function in part.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Add support for gth2 boardWolfgang Denk2006-06-16-1/+6
| | | | Patch by Thomas Lange, Aug 11 2005
* GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk2006-03-31-1/+4
|
* Fix U-Boot compilation for MIPS boards using ELDK 4.0Wolfgang Denk2005-12-01-1/+1
|
* Cleanup for GCC-4.xWolfgang Denk2005-10-13-3/+3
|
* Add port initialization for digital I/O on INKA4x0wdenk2005-03-06-1/+1
|