summaryrefslogtreecommitdiff
path: root/cmd
Commit message (Collapse)AuthorAgeLines
* cmd: mtdparts: support runtime generated mtdpartsLadislav Michl2016-07-22-9/+12
| | | | | | | | | | | Some CPUs contains boot ROM code capable reading first few blocks (where SPL resides) of NAND flash and executing it. It is wise to create separate partition here for SPL. As block size depends on NAND chip used, we could either use worst case (biggest) partition size or base its size on actual block size. This patch adds support for the latter option. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* cmd: mtdparts: use defaults by defaultLadislav Michl2016-07-22-6/+16
| | | | | | | | | | | Boards which are defining default mtdparts often need them early in boot process (to load environment from UBI volume, for example). This is currently solved by adding mtdparts and mtdids variable definitions also to default environment. With this change, default partitions are used by default unless explicitely deleted or redefined. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* cmd: mtdparts: consolidate mtdparts reading from envLadislav Michl2016-07-22-22/+20
| | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* cmd: mtdparts: fix null pointer dereference in parse_mtdpartsLadislav Michl2016-07-22-10/+13
| | | | | | | | | | In case there is no mtdparts variable in relocated environment, NULL is assigned to p, which is later fed to strncpy. Also function parameter mtdparts is completely ignored, so use it in case mtdparts variable is not found in environment. This parameter is checked not to be NULL in caller. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* cmd: mtdparts: fix mtdparts variable presence confusion in mtdparts_initLadislav Michl2016-07-22-4/+6
| | | | | | | | | A private buffer is used to read mtdparts variable from non-relocated environment. A pointer to that buffer is returned unconditionally, confusing later test for variable presence in the environment. Fix it by returning NULL when getenv_f fails. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-07-19-2/+2
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/cpu/armv8/Makefile arch/arm/lib/bootm-fdt.c
| * armv8: Move secure_ram variable out of generic global dataYork Sun2016-07-15-2/+2
| | | | | | | | | | | | | | Secure_ram variable was put in generic global data. But only ARMv8 uses this variable. Move it to ARM specific data structure. Signed-off-by: York Sun <york.sun@nxp.com>
* | Various, unrelated tree-wide typo fixes.Robert P. J. Day2016-07-16-1/+1
|/ | | | | | | | | | | | | | | | | | | Fix a number of typos, including: * "compatble" -> "compatible" * "eanbeld" -> "enabled" * "envrionment" -> "environment" * "FTD" -> "FDT" (for "flattened device tree") * "ommitted" -> "omitted" * "overriden" -> "overridden" * "partiton" -> "partition" * "propogate" -> "propagate" * "resourse" -> "resource" * "rest in piece" -> "rest in peace" * "suport" -> "support" * "varible" -> "variable" Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-07-11-0/+2
|\
| * dm: spi: Read default speed and mode values from DTVignesh R2016-07-09-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | In case of DT boot, don't read default speed and mode for SPI from CONFIG_*, instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | usb: dm: Make "usb info" use usb_for_each_root_dev()Hans de Goede2016-07-05-25/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old dm "usb info" implementation has several issues: 1) NULL pointer deref when a bus has no children 2) Not showing usb devices on busses without an emulated root-hub (otg host) 3) Attempting to show devices on inactive busses 4) "usb info" Would cause some hosts to get re-probed something which only "usb reset" should do TL;DR: proper iterating over usb bus root devs is hard, use the helper for it. Reported-by: Bernhard Nortmann <bernhard.nortmann@web.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | usb: dm: Add a usb_for_each_root_dev() helper functionHans de Goede2016-07-05-3/+12
|/ | | | | | | | Iterating over usb-root devs and doing something for all of them is a bit tricky with dm, factor out the proven usb_show_tree() for this into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSERMasahiro Yamada2016-06-24-8/+2
| | | | | | | There is no more define of CONFIG_SYS_HUSH_PARSER. Rename some remaining references and drop the backward compatible Kconfig entry. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* common: image: minimal android image iminfo supportMichael Trimarchi2016-06-24-0/+6
| | | | | | | | | We already support iminfo for other images. The idea of this patch is start to have a minimal support for android image format. We still need to print id[] array Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* cmd: bootefi: cosmeticSergey Kubushyn2016-06-24-1/+1
| | | | | | | | | | | | | | | | | | Short help (description) in bootefi command has a trailing "\n" that breaks the "help" command output (empty line after "bootefi"). Nothing important, doesn't affect anything but better be fixed in the upcoming release. Still working on i.MX6 and their siblings NAND U-Boot update -- it works here but not ready for a submission yet. Anyway it is for the next cycle, not going to go into this release because it is too big and may affect something else. Also have some thoughts about fastboot (using multiple devices) but this will go into separate email with RFC. Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
* autoboot: add CONFIG_AUTOBOOT to allow to not compile autoboot.cMasahiro Yamada2016-06-20-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards. Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to not compile common/autoboot.c, as described in common/Makefile: # This option is not just y/n - it can have a numeric value ifdef CONFIG_BOOTDELAY obj-y += autoboot.o endif It was a bit odd to enable/disable code with an integer type option, but it was how this option worked before that commit, and several boards actually unset it to opt out of the autoboot feature. This commit adds a new bool option, CONFIG_AUTOBOOT, and makes CONFIG_BOOTDELAY depend on it. I chose "default y" for this option because most boards use the autoboot. I added "# CONFIG_AUTOBOOT is not set" for the boards that had not set CONFIG_BOOTDELAY prior to the bad commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-nand-flashTom Rini2016-06-20-6/+35
|\
| * nand: extend nand tortureMax Krummenacher2016-06-19-6/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nand torture currently works on exactly one nand block which is specified by giving the byteoffset to the beginning of the block. Extend this by allowing for a second parameter specifying the byte size to be tested. e.g. ==> nand torture 1000000 NAND torture: device 0 offset 0x1000000 size 0x20000 (block size 0x20000) Passed: 1, failed: 0 ==> nand torture 1000000 40000 NAND torture: device 0 offset 0x1000000 size 0x40000 (block size 0x20000) Passed: 2, failed: 0 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> [scottwood: fix usage to show size as optional, and add misssing braces] Signed-off-by: Scott Wood <oss@buserror.net>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-06-18-1/+2
|\ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
| * | cmd: usb: check if_type before using this devicePeng Fan2016-06-18-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For legacy usb storage driver, USB_MAX_STOR_DEV is defined as 7. If we only have one usb disk on board, `usb dev 0` is ok. But if `usb dev 1`, still ok, then `usb read xxx` will trigger system fault and reboot. So check if_type before using this device. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stephen Warren <swarren@nvidia.com>
* | | cmd: gpt: add - partition size parsingMichael Trimarchi2016-06-12-2/+11
|/ / | | | | | | | | | | | | | | | | | | This patch try to parse name=userdata,size=-,uuid=${uuid_gpt_userdata}; gpt mmc write 0 $partitions gpt mmc verify 0 $partitions Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ubi: add new ubi command "ubi detach"Heiko Schocher2016-06-09-11/+27
| | | | | | | | | | | | simple detachs ubi from the mtd partition. Signed-off-by: Heiko Schocher <hs@denx.de>
* | efi_loader: Move to normal debug infrastructureAlexander Graf2016-06-06-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | We introduced special "DEBUG_EFI" defines when the efi loader support was new. After giving it a bit of thought, turns out we really didn't have to - the normal #define DEBUG infrastructure works well enough for efi loader as well. So this patch switches to the common debug() and #define DEBUG way of printing debug information. Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_loader: Add exit supportAlexander Graf2016-06-06-0/+6
|/ | | | | | | | | | | Some times you may want to exit an EFI payload again, for example to default boot into a PXE installation and decide that you would rather want to boot from the local disk instead. This patch adds exit functionality to the EFI implementation, allowing EFI payloads to exit. Signed-off-by: Alexander Graf <agraf@suse.de>
* mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_dataScott Wood2016-06-03-2/+2
| | | | | | | | | These functions are part of the Linux 4.6 sync. They are being added before the main sync patch in order to make it easier to address the issue across all NAND drivers (many/most of which do not closely track their Linux counterparts) separately from other merge issues. Signed-off-by: Scott Wood <oss@buserror.net>
* nand: Embed mtd_info in struct nand_chipScott Wood2016-06-03-24/+24
| | | | | | | | | | | | nand_info[] is now an array of pointers, with the actual mtd_info instance embedded in struct nand_chip. This is in preparation for syncing the NAND code with Linux 4.6, which makes the same change to struct nand_chip. It's in a separate commit due to the large amount of changes required to accommodate the change to nand_info[]. Signed-off-by: Scott Wood <oss@buserror.net>
* mtd: nand: Remove nand_info_t typedefScott Wood2016-06-03-99/+98
| | | | | | | This typedef serves no purpose other than causing confusion with struct nand_chip. Signed-off-by: Scott Wood <oss@buserror.net>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-05-27-62/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | For odroid-c2 (arch-meson) for now disable designware eth as meson now needs to do some harder GPIO work. Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: lib/efi_loader/efi_disk.c Modified: configs/odroid-c2_defconfig
| * mmc: Drop dead mmc code for non-generic MMCSimon Glass2016-05-26-62/+0
| | | | | | | | | | | | | | All boards that use MMC define CONFIG_GENERIC_MMC now, so we can drop this old code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | efi_loader: Add network access supportAlexander Graf2016-05-27-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | We can now successfully boot EFI applications from disk, but users may want to also run them from a PXE setup. This patch implements rudimentary network support, allowing a payload to send and receive network packets. With this patch, I was able to successfully run grub2 with network access inside of QEMU's -M xlnx-ep108. Signed-off-by: Alexander Graf <agraf@suse.de>
* | cmd: replace the cast of the memory access to a fixed bit type in itestKunihiko Hayashi2016-05-27-3/+3
| | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug that long word(.l) memory access in 'itest' command reads the 8bytes of the actual memory on 64-bit architecture. The cast to the memory pointer should use a fixed bit type. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* | cmd: disk: Fix unused variable warningMarek Vasut2016-05-27-1/+2
|/ | | | | | | | | | | | | | | | | | | If serial support is not compiled into U-Boot, which may be the case for some SPL builds, the following warning will be generated in disk.c: cmd/disk.c: In function 'common_diskboot': cmd/disk.c:16:6: warning: variable 'dev' set but not used [-Wunused-but-set-variable] int dev, part; ^ The warning is a result of printf() calls being optimized away, and thus the whole dev variable becomes indeed unused. Mark the variable as __maybe_unused . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm64: fix arm64 Linux boot image header field sizesAndre Przywara2016-05-25-3/+6
| | | | | | | | | | | | | The arm64 Linux boot protocol [1] describes the fields in the Image header as being 64-bit little endian values. So fix the endianess conversion to use 64-bit sized operations, for both image_size and text_offset. Also we use a local variable for the image_size to avoid both writing to the header and also accessing it after we actually unmapped it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.txt
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-05-23-0/+202
|\
| * cmd: qfw: do not depend on x86Miao Yan2016-05-23-1/+0
| | | | | | | | | | | | | | | | | | The qfw command interface used to depend on X86, this patch removes this restriction so it can be built for sandbox for testing. For normal usage, it can only be used with CONFIG_QEMU. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * cmd: qfw: do not require default macros when building qfw commandMiao Yan2016-05-23-0/+13
| | | | | | | | | | | | | | | | | | | | | | The qfw command interface makes use of CONFIG_LOADADDR and CONFIG_RAMDISKADDR to setup kernel. But not all boards have these macros, which causes build problem on those platforms. This patch fixes this issue. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h]Miao Yan2016-05-23-3/+3
| | | | | | | | | | | | | | Make file names consistent with CONFIG_QFW and CONFIG_CMD_QFW Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: qemu: split qfw command interface and qfw coreMiao Yan2016-05-23-173/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch splits qfw command interface and qfw core function into two files, and introduces a new Kconfig option (CONFIG_QFW) for qfw core. Now when qfw command interface is enabled, it will automatically select qfw core. This patch also makes the ACPI table generation select CONFIG_QFW. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * cmd: qfw: make fwcfg_present and fwcfg_dma_present publicMiao Yan2016-05-23-17/+20
| | | | | | | | | | | | | | | | This patch is part of the qfw refactor work. This patch makes qemu_fwcfg_present() and qemu_fwcfg_dma_present() public functions. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * cmd: qfw: remove qemu_fwcfg_free_files()Miao Yan2016-05-23-12/+0
| | | | | | | | | | | | | | | | | | | | | | This patch is part of the qfw refactor work. The qemu_fwcfg_free_files() function is only used in error handling in ACPI table generation, let's not make this a core function and move it to the right place. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * cmd: qfw: add API to iterate firmware listMiao Yan2016-05-23-3/+22
| | | | | | | | | | | | | | | | This patch is part of the refactor work of qfw. It adds 3 APIs to qfw core to iterate firmware list. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: qemu: Move qfw command over to cmd and add Kconfig entryTom Rini2016-05-23-0/+351
| | | | | | | | | | | | | | | | | | | | - Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into cmd/qemu_fw_cfg.c - Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h - Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-05-23-0/+2
|\ \
| * | mips: Report reloc information in bdinfoTim Chick2016-05-21-0/+2
| |/ | | | | | | Signed-off-by: Tim Chick <tim.chick@mediatek.com>
* | eeprom: merge cmdline parsing of eeprom commandsNikita Kiryanov2016-05-20-64/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge the parsing of layout aware and layout unaware eeprom commands into one parsing function. With this change, layout aware commands now follow the eeprom read and eeprom write conventions of making i2c bus and i2c address parameters optional. Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | eeprom: use eeprom_execute_command for all eeprom functionsNikita Kiryanov2016-05-20-21/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update eeprom_execute_command() and related code to accommodate both layout aware and layout unaware functions. No functional changes. Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Make eeprom_execute_command have ulong for i2c_addr] Signed-off-by: Tom Rini <trini@konsulko.com>
* | eeprom: refactor i2c bus and devaddr parsingNikita Kiryanov2016-05-20-26/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce parse_i2c_bus_addr() to generalize the parsing of i2c bus number and i2c device address. This is done in preparation for merging layout aware and layout unaware command parsing into one function. No functional changes. Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | cmd: eeprom: add support for layout aware commandsNikita Kiryanov2016-05-20-1/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the (optional) eeprom print and eeprom update commands. These commands are eeprom layout aware: * The eeprom print command prints the contents of the eeprom in a human readable way (eeprom layout fields, and data formatted to be fit for human consumption). * The eeprom update command allows user to update eeprom fields by specifying the field name, and providing the new data in a human readable format (same format as displayed by the eeprom print command). * Both commands can either auto detect the layout, or be told which layout to use. New CONFIG options: CONFIG_CMD_EEPROM_LAYOUT - enables commands. CONFIG_EEPROM_LAYOUT_HELP_STRING - tells user what layout names are supported Feature API: __weak int parse_layout_version(char *str) - override to provide your own layout name parsing __weak void __eeprom_layout_assign(struct eeprom_layout *layout, int layout_version); - override to setup the layout metadata based on the version __weak int eeprom_layout_detect(unsigned char *data) - override to provide your own algorithm for detecting layout version eeprom_field.c - contains various printing and updating functions for common types of eeprom fields. Can be used for defining custom layouts. Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | cmd: eeprom: add bus switching support for all i2c driversNikita Kiryanov2016-05-20-1/+1
|/ | | | | | | | | | | | | The i2c_init function is always provided when CONFIG_SYS_I2C is defined. No need to limit ourselves to just one supported I2C driver (soft_i2c). Update the #ifdef conditions to support bus switching for all I2C drivers. Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* dm: mmc: Move the device list into a separate fileSimon Glass2016-05-17-4/+4
| | | | | | | | | At present the MMC subsystem maintains its own list of MMC devices. This cannot work with driver model, which needs to maintain this itself. Move the list code into a separate 'legacy' file. The core MMC code remains, and will be shared with the driver-model implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-02 06:09:22 +0000