summaryrefslogtreecommitdiff
path: root/boards.cfg
Commit message (Collapse)AuthorAgeLines
* Davinci: add support for the ea20 boardStefano Babic2010-12-09-0/+1
| | | | | | | | | | This board uses the OMAP-L138 SOM stacked on a custom baseboard. It supports SPI Flash, Ethernet with RMII. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Add board support for hawkboardSughosh Ganu2010-12-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds basic board support for TI's OMAP-L138 based Hawkboard. This board is pretty similar to the da850 EVM. Support for nand and network access is added in this version. The following bootup procedure is used. At reset, the Rom Boot Loader(RBL), initialises the ddr and the nand controllers and copies the second stage bootloader(nand_spl) to RAM. The secondary bootloader then copies u-boot from a predefined location in the nand flash to the RAM, and passes control to the u-boot image. Three config options are supported * hawkboard_config - Used to create the u-boot.bin. Tftp the u-boot.bin image to the RAM from u-boot, and flash to the nand flash at address 0xe0000. * hawkboard_nand_config - Used to generate the secondary bootloader(nand_spl) image. This creates an elf file u-boot-spl under nand_spl/. Create an AIS signed image using this file, and flash it to the nand flash at address 0x20000. The ais file should fit in one block. * hawkboard_uart_config - This is same as the first image, but with the TEXT_BASE as expected by the RBL(0xc1080000). Create the AIS Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* sort and reformat boards.cfgEric Cooper2010-11-27-721/+728
| | | | | | | update suggested sort command in comment to produce desired order suggest use of "column -t" to reformat Signed-off-by: Eric Cooper <ecc@cmu.edu>
* barco: drop unsupported board configurationWolfgang Denk2010-11-26-1/+0
| | | | | | | | | | The barco board appears to be unmaintained since it was added about 5 years ago. The environment location has probably never been correct. Drop it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Marc Leeman <marc.leeman@barco.com> Acked-by: Stefan Roese <sr@denx.de>
* ERIC: drop unsupported board configurationWolfgang Denk2010-11-26-1/+0
| | | | | | | | | | | The ERIC board appears to be unmaintained for more than 9 years. The environment location has probably never been correct, and has been definitely broken since for at least a year. Drop it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Swen Anderson <sand@peppercon.de> Acked-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-26-0/+1
|\
| * Seagate FreeAgent DockStar supportEric Cooper2010-11-26-0/+1
| | | | | | | | | | | | | | | | | | | | | | start with sheevaplug configuration add modifications by Alexander Holler <holler@ahsoftware.de> change RAM definitions to one bank (128 MB) change ident string and prompt define MTD partitions and default environment variables add support for LEDs Signed-off-by: Eric Cooper <ecc@cmu.edu>
* | Fix NAND booting make targetStefan Roese2010-11-24-10/+10
|/ | | | | | | | Without this fix, the NAND_SPL target (in nand_spl/) is not built at all for those boards defining NAND_U_BOOT=y in boards.cfg. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com>
* powerpc/8xxx: Fix merge issue with P2020DS DDR2 build configKumar Gala2010-11-10-1/+1
| | | | | | | | When P2020DS DDR2 was merged it was merged incorrectly and propogated to boards.cfg. Fix this by moving DDR2 config to be associated with P2020DS and not P1_P2_RDB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2010-10-26-0/+1
|\
| * Blackfin: bf527-ezkit-v2: move to boards.cfgMike Frysinger2010-10-25-0/+1
| | | | | | | | | | | | | | Now that the boards.cfg file supports options to mkconfig, we can move the bf527-ezkit-v2 target out of the Makefile and into boards.cfg. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-10-26-0/+2
|\ \
| * | ppc4xx: Add Io and IoCon 405EP board supportDirk Eibach2010-10-25-0/+2
| |/ | | | | | | | | | | | | | | Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | VoVPN-GW_100MHz: drop unsupported board configurationWolfgang Denk2010-10-24-1/+0
|/ | | | | | | The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'for-wd-master' of git://git.denx.de/u-boot-pxaWolfgang Denk2010-10-23-3/+0
|\
| * PXA: Remove "xsengine" boardMarek Vasut2010-10-22-1/+0
| | | | | | | | | | | | This board is broken and it's not possible to repair it. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Remove "wepep250" boardMarek Vasut2010-10-22-1/+0
| | | | | | | | | | | | | | This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Remove "delta" boardMarek Vasut2010-10-22-1/+0
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-10-23-4/+5
|\ \
| * | XPedite5500 board supportJohn Schmoller2010-10-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | xes: Make X-ES board names more genericPeter Tyser2010-10-22-4/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | sh: sh4: Move to boards.cfgNobuhiro Iwamatsu2010-10-21-0/+10
| | | | | | | | | | | | | | Move the sh4 target boards out of the Makefile and into boards.cfg. And fix sh4 of MAKEALL. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: sh3: Move to boards.cfgNobuhiro Iwamatsu2010-10-21-0/+2
| | | | | | | | | | | | | | Move the sh3 target boards out of the Makefile and into boards.cfg. And fix sh3 of MAKEALL. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: rsk7203: Move to boards.cfgNobuhiro Iwamatsu2010-10-21-0/+1
|/ | | | | | | Move the rsk7203 target out of the Makefile and into boards.cfg. And fix sh2 of MAKEALL. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-20-3/+11
|\
| * Build: PXA: Fix TrizepsIV build variantsMarek Vasut2010-10-19-0/+2
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * Build: PXA: Fix Vpac270 build variantsMarek Vasut2010-10-19-0/+3
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Balloon3 board supportMarek Vasut2010-10-19-0/+1
| | | | | | | | | | | | | | | | | | The following hardware is currently supported: - UART - USB Host - FPGA Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Add initial Palm LifeDrive supportMarek Vasut2010-10-19-0/+1
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Palm Tungsten|C SupportMarek Vasut2010-10-19-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Palm Tungsten|C PXA255 board. The support includes: - LCD - MMC - UART - NOR Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-19-1/+1
| |\
| | * at91rm9200ek: convert to at91Andreas Bießmann2010-10-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes some functionality from at91rm9200ek board but the remaining functionality does now work with newer at91 code and arm-relocation. Currently missing features are: - dataflash booting (due to missing HW for testing) - MMC/SD-Card - first stage bootloader support is completely removed (not needed for NOR) Cause this board was (some days ago) reference for all at91rm9200 based boards this should be a good starting point to convert all remaining at91rm9200 borads to at91 code. Aside from that this is a good base to get some drivers between at91sam/at91rm/avr32 merged. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-19-2/+2
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | Conflicts: board/logicpd/imx31_litekit/config.mk boards.cfg Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * MX5: rename mx51 to mx5Jason Liu2010-10-18-2/+2
| | | | | | | | | | | | | | | | | | | | | Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu <r64343@freescale.com>
* | | boards.cfg: update local documentationMike Frysinger2010-10-19-3/+11
| | | | | | | | | | | | | | | | | | | | | The "options" field at the moment is only documented in the changelog which isn't terribly useful to people without git. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | Add support for HP Jornada flashrom boardsKristoffer Ericson2010-10-19-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the HP Jornada flashboards that were made in 2008. Older flashroms should work if memory registers are adjusted. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Adpted for TEXT_BASE -> CONFIG_SYS_TEXT_BASE rename. Removed now redundant board/jornada/config.mk file. Removed unused empty jornada_init() function to silence "jornada.c:35: warning: 'jornada_init' defined but not used" Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | NC650/CP850: remove code for yet another corpseWolfgang Denk2010-10-19-3/+0
|/ / | | | | | | | | | | | | | | The NC650 / CP850 boards have long been unmaintained and left broken. As obviously nobody is interested in that code any more, we may as well remove it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Makefile: move all Power Architecture boards into boards.cfgWolfgang Denk2010-10-18-17/+362
| | | | | | | | | | | | | | | | | | | | Clean up Makefile, and drop a lot of the config.mk files on the way. We now also automatically pick all boards that are listed in boards.cfg (and with all configurations), so we can drop the redundant entries from MAKEALL to avoid building these twice. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Build: Add "board options" column to boards.cfgMarek Vasut2010-10-18-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some boards where it's currently not possible to detect all board information at runtime, therefore a new column was added to boards.cfg . This column can contain multiple options: a board configuration name, optionally followed by a colon (':') and a list of options, which are separated by comma (','). In case of simple options like '256M_U_BOOT', these expand to "#define CONFIG_MK_256M_U_BOOT 1" in config.h . In case of assignments like 'RAM=8192', these expand to "#define CONFIG_MK_RAM 8192" in config.h . Example: FOO:HAS_BAR,BAZ=64 means: - the name of the board config file is include/configs/FOO.h - the generated file include/config.h will contain these lines: #define CONFIG_HAS_BAR 1 #define CONFIG_BAZ 64 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> [wd@denx.de: edited commit message; added code to deal with an optional board configuration name] Signed-off-by: Wolfgang Denk <wd@denx.de>
* | logodl: remove code for yet another corpseWolfgang Denk2010-10-18-1/+0
|/ | | | | | | | | | | The logodl board has long been unmaintained and left broken. As obviously nobody is interestedin that code any more, we may as well remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: August Hoeraendl <august.hoerandl@gmx.at> Cc: Robert Schwebel <r.schwebel@pengutronix.de> Cc: Marek Vasut <marek.vasut@gmail.com>
* OMAP3: Add support for the OMAP3 IGEP module.Enric Balletbo i Serra2010-10-17-0/+1
| | | | | | | | | | The IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family.The IGEP module solution based upon TI OMAP3 provides a low-power/low-cost platform for a variety of consumer/industrial/medical devices. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: Add support for the IGEP v2 board.Enric Balletbo i Serra2010-10-17-0/+1
| | | | | | | | | | | | The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-13-0/+2
|\
| * ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel2010-10-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
| * Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-11-0/+1
| |\
| | * MX51: Support for TTECH vision2 boardStefano Babic2010-10-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for TTECH vision2 board. The board has 512MB RAM, SDHC slot and 4MB SPI device from StMicron. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | | A4M072: Added support for the board.Sergei Poselenov2010-10-12-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides support for the A4M072 board with the following features: UART NOR flash FEC Ethernet External SRAM I2C EEPROM CompactFlash cards on IDE/ATA port USB Host PCI initialization The 7-segment LED indicator is not yet supported. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* | CCM: remove code for yet another corpseWolfgang Denk2010-10-06-1/+0
| | | | | | | | | | | | | | The CCM board has long reached EOL, and support for it is no longer relevant in current versions of U-Boot. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | PCU_E: remove code for yet another corpseWolfgang Denk2010-10-06-1/+0
| | | | | | | | | | | | | | The PCU_E board has long reached EOL, and support for it is no longer relevant in current versions of U-Boot. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2010-10-05-0/+3
|\ \
generated by cgit v1.1 at 2024-12-30 17:13:43 +0000